Moxa Technologies TAP-6226 Manuale utente

P/N: 1802062260011

*1802062260011*

TAP-6226

Quick Installation Guide

Moxa Tough AP

Edition 2.0, September 2017

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

The TAP-6226 trackside wireless unit is designed for board-to-ground

wireless communication. It is a highly compact and rugged wireless unit

that integrates two access points, a managed fiber switch, and a

wide-range AC/DC power supply, all in one box. The IP68 housing allows

the unit to withstand the harshest of weather and the unit is shock and

vibration proof with M12 connectors. The TAP-6226 supports advanced

controller-based Turbo Roaming technology for applications such as

Communication-Based Train Control (CBTC). The unit can also supply

power for up to 4 PoE devices while providing reliable LAN communication

with Moxa’s Turbo Chain technology.

WARNING, ATTENTION, NOTE

WARNING

Death or personal injury may occur if you do not follow the

precautions indicated in a WARNING statement.

ATTENTION

Damage to this product or your property may result if you do not

follow the precautions indicated in an ATTENTION statement.

NOTE

Indicates important information related to this product.

Package Checklist

Moxa’s TAP-6226 is shipped with the following items. If any of these items

is missing or damaged, please contact your customer service

representative for assistance.

•TAP-6226 with protective caps for LAN/fiber/console ports

•Accessory pack, including wall-mounting kit and fiber panel mounting

kit

•Quick installation guide (printed)

•Warranty card

NOTE

The items above come with the standard version TAP-6226 The

package contents may vary for customized versions.

- 3 -

Recommended SFP Modules

NOTE

Can be purchased separately.

SFP-1FE Series

•SFP-1FELLC-T: SFP module, 100Base single-mode with LC

connector for 80 km transmission, -40 to 85°C operating temperature

•SFP-1FEMLC-T: SFP module, 100Base multi-mode with LC

connector for 4 km transmission, -40 to 85°C operating temperature

•SFP-1FESLC-T: SFP module, 100Base single-mode with LC

connector for 40 km transmission, -40 to 85°C operating temperature

Installation

Before installing the TAP-6226, make sure that all items in the Package

Checklist are in the box. In addition, you will need access to a notebook

computer or PC equipped with an Ethernet port. The TAP-6226 has a

default IP address, user name, and password that you must use when

resetting or connecting to your TAP-6226 device.

Default IP address: 192.168.127.253

User name: admin

Password: moxa

NOTE

Firmw

are Version 1.6 password: moxa

Firmware Versions 1.0 to 1.5 password: root

Read Chapter 2: Getting Started in the TAP-6226 User’s Manual for

more details about installation and configuration.

ATTENTION

For security reasons, we strongly recommend changing the

passw

ord. To do so, go to Maintenance



Password

, and then

follow the on-screen instructions.

NOTE

To make the change effective, you must save the change and

then click Restart Save and Restart to apply all changes.

- 4 -

Panel Layout of the TAP-6226

1. MAIN 1 N-type antenna port

2. MAIN 2 N-type antenna port

3. PG29 gasket

4. LEDs for: PWR1, PWR2,

FAULT, STATUS,

MSTR/HEAD, CPLR/TAIL,

LAN1-6, PoE1-4, WLAN1-2.

5. Fiber SFP port: LAN5

6. Fiber SFP port: LAN6

7. M23 5-pin connector for

PWR1, PWR2.

8. Waterproof vent

9. Reset button

10.

PG36 gasket

11.

Grounding screw

12.

10/100BaseT(X) M12 port:

LAN1, LAN2, LAN3, LAN4.

13.

M12 5-pin console port

14.

Mounting hole for fiber panel

bracket

15.

Wall mount kit

ATTENTION

DO NOT open or remove

the waterproof vent (item 8

in the above

figure)

. Removing the seal will void the warranty.

Ports that are

not being used should be covered tightly by the

appropriate caps.

- 5 -

Dimensions (unit = mm)

Wall Mounting

In most applications, wall mount provides an easier installation. You will

find it quite easy to mount the TAP-6226 on the wall, as illustrated below.

STEP 1: Attach the

wall

-mounting kit with

M4 screws, as shown in

the diagram below.

STEP 2: Mounting the TAP-6226 on the wall requires 4

screws. Use the

TAP-6226 device, with wall-mounting

kit attached, as a guide to mark the correct locations

of the 4 screws. The heads of the screws should be

between

5.5 mm and 8.5 mm in diameter, and the

shafts should

not be more than 5.0 mm in diameter,

as shown in the figure.

Do not screw the screws all the way in to the wall—leave a space of about

2 mm to allow room to slide the wall-mounting kit between the wall and

the screws.

- 6 -

ATTENTION

est the screw head and shank size by inserting the screw into

one of the keyhole shaped apertures of the

wall mounting p

lates

before it is screwed into the wall.

STEP 3:

Once the screws are fixed into the wall, insert the four screw heads

through the large opening of the keyhole-shaped apertures, and then

slide the TAP-6226 downwards, as indicated below. Tighten the four

screws for added stability.

Wiring Requirements

WARNING

Safety First!

Be sure to disconnect the power

cord before installing and/or

wiring your Moxa

TAP-6226.

Calculate the maximum possible current in each power wire and

common wire. Observe all electrical codes dictating the

maximum current allowable for each wire size. If the current goes

above the maximum ratings, the wiring could overheat, causing

serious damage to your equipment.

You should also pay attention to the following items:

•Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

NOTE: Do not run signal or communications wiring and power wiring

in the same wire conduit. To avoid interference, wires with different

signal characteristics should be routed separately.

•You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring with similar electrical characteristics can be bundled

together.

•Keep input wiring and output wiring separate.

•It is strongly advised that you label wiring to all devices in the system

when necessary.

- 7 -

Grounding the Moxa TAP-6226

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from the

ground screw to the grounding surface prior to connecting devices.

ATTENTION

This product is intended to be mounted to a well

-grounded

mounting surface, such as a metal panel. There must be no

potential difference between two ground

potentials; otherwise,

there is a risk that the device could be destroyed.

Wiring the Redundant Power Inputs

The TAP-6226 must be connected to an IEC 60950 compliant limited

power source. When the TAP-6226 is powered by AC power, the M23

connector on the bottom panel is used for the TAP-6226’s two redundant

inputs. The M23 connector is protected by a size PG36 gasket, which is

used to attach a cable gland on top of the power cable. The pin

assignment is shown below:

Communication Connections

10/100BaseT(X) Ethernet Port Connection

All TAP-6226 units have a 10/100BaseT(X) Ethernet port (4-pin shielded

M12 connector with D coding). The 10/100TX port located on the

TAP-6226’s front panel is used to connect to Ethernet-enabled devices.

Most users configure this port for Auto MDI/MDI-X mode, in which case

the port’s pinouts are adjusted automatically depending on the type of

Ethernet cable used (straight-through or cross-over), and the type of

device (NIC-type or HUB/switch-type) connected to the port.

Pinouts for the 10/100BaseT(X) Port

- 8 -

RS-232 Connection

The TAP-6226 has one RS-232 (5-pin M12) console port located on the

bottom panel. Use either an M12-to-DB9 or M12-to-DB25 cable to

connect the TAP-6226’s console port to your PC’s COM port. You may then

use a console terminal program to access the TAP-6226 for console

configuration.

Console Pinouts for 5-pin M12 Connectors

LED Indicators

The front panel of the TAP-6226 contains several LED indicators. The

function of each LED is described in the table below.

LED

Color

State

Description

PWR1

Green

Power is being supplied (from power

input 1)

Off

Power is not being supplied

PWR2

Green

Power is being supplied (from power

input 2)

Off

Power is not being supplied

FAULT

Red

Relay is event-triggered

Blinking

(slow)

Cannot get an IP address from the DHCP

server (interval: 1 sec)

Blinking

(fast)

IP address conflict (interval: 0.5 sec)

Off

Normal status

STATE

Green/

Red

Green

Software ready

Green,

blinking

The AWK Search Utility has located the

AWK. (interval: 1sec)

Red

Booting or error condition

HEAD

Green

TAP is set as HEAD TAP in Turbo Chain

Blinking

TAP head port link is broken

Off TAP is not set as HEAD TAP in Turbo

Chain

TAIL

Green

TAP is set as TAIL TAP in Turbo Chain

Blinking

TAP TAIL port link is broken or in

blocking state

Off

TAP is not set as TAIL TAP in Turbo

Chain

- 9 -

LED

Color

State

Description

WLAN1

Green/

Amber

Green On

WLAN is in Client/Slave mode

Green,

blinking

WLAN is transmitting data in

Client/Slave mode

Amber On

WLAN is in AP/Bridge/Master mode

Amber,

blinking

WLAN is transmitting data in

AP/Bridge/Master mode

Off

WLAN is not in use or is not working

properly

WLAN2

Green/

Amber

Green On

WLAN is in Client/Slave mode

Green,

blinking

WLAN is transmitting data in

Client/Slave mode

Amber On WLAN is functioning in

AP/Bridge/Master mode

Amber,

blinking

WLAN is transmitting data in

AP/Bridge/Master mode

Off

WLAN is not in use or is not working

properly

LAN1-6

Yellow/

Green

Yellow, on

LAN port’s 10 Mbps link is active

Yellow,

blinking

Data is being transmitted at 10 Mbps

Yellow, off

LAN port’s 10 Mbps link is inactive

Green, on

LAN port’s 100 Mbps link is active

Green,

blinking

Data is being transmitted at 100 Mbps

Green, off

LAN port’s 100 Mbps link is inactive

PoE1-4

Green

PSE port is supplying power to PD

Off

PSE port is not supplying power

Specifications

WLAN

Standards

IEEE 802.11a/b/g for Wireless LAN

IEEE 802.11i for Wireless Security

IEEE 802.3 for 10BaseT

IEEE 802.3u for 100BaseTX

IEEE 802.3af for Power-over-Ethernet

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid STP

IEEE 802.1p for Class of Service

IEEE 802.1Q for VLAN

Spread Spectrum and

Modulation (Typical)

• DSSS with DBPSK, DQPSK, CCK

• OFDM with BPSK, QPSK, 16QAM, 64QAM

• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2

Mbps, DBPSK @ 11 Mbps

• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @

36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6

Mbps

- 10 -

Operating Channels

(Central Frequency)

US:

2.412 to 2.462 GHz (802.11abg, 11 channels)

5.18 to 5.24 GHz (802.11a, 4 channels)

5.26 to 5.825 GHz (optional)

EU:

2.412 to 2.472 GHz (802.11abg, 13 channels)

5.18 to 5.24 GHz (802.11a, 4 channels)

5.26 to 5.825 GHz (optional)

*Special frequency bands (such as 5.9 GHz) is

available for customization.

Security

• SSID broadcast enable/disable

• Firewall for MAC/IP/Protocol/Port-based

filtering

• 64-bit and 128-bit WEP encryption, WPA

/WPA2-Personal and Enterprise (IEEE

802.1X/RADIUS, TKIP and AES)

Transmission Rates

802.11b: 1, 2, 5.5, 11 Mbps

802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps

TX Transmit Power 802.11b:

Typ. 26±1.5 dBm @ 1 to 11 Mbps

802.11g:

Typ. 26±1.5 dBm @ 6 to 24

Mbps, Typ. 25±1.5

dBm @ 36 Mbps, Typ. 24±1.5 dBm @ 48 Mbps,

Typ. 23±1.5 dBm @ 54 Mbps

802.11a:

Typ. 26±1.5 dBm @ 6 to Mbps, Typ. 25±1.5 dBm

@ 36Mbps, Typ. 24±1.5 dBm @ 48 Mbps, Typ.

23±1.5 dBm @ 54 Mbps

RX Sensitivity

802.11b:

-97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -

92 dBm

@ 5.5 Mbps, -90 dBm @ 11 Mbps

802.11g:

-93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -

90 dBm

@ 12 Mbps, -88 dBm @ 18 Mbps, -

84 dBm @ 24

Mbps, -80 dBm @ 36 Mbps, -

76 dBm @ 48 Mbps,

-74 dBm @ 54 Mbps

802.11a:

-90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm

@ 12 Mbps, -85 dBm @ 18 Mbps, -

83 dBm @ 24

Mbps, -79 dBm @ 36 Mbps, -

75 dBm @ 48 Mbps,

-74 dBm @ 54 Mbps

Protocol Support

General Protocols

General Protocols: Proxy ARP, DNS, HTTP,

HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS,

SNMP v1/v2/v3, PPPoE, DHCP, STP/RSTP

Interface

Connector for External

Antennas

N-type (female)

Fast Ethernet ports 4, side cabling, M12 D-coded 4-pin female

connector, 10/100BaseT(X) auto negotiation

speed, F/H duplex mode, and auto MDI/MDI-X

connection, 802.1af PoE power budget

Console Port

M12 A-coded 5-pin male connector

Fiber Ports

2, 100BaseSFP slot

Altri manuali per TAP-6226

Indice

Altri manuali Moxa Technologies Punto di accesso wireless

Moxa Technologies

Moxa Technologies AirWorks AWK-3191 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-1127 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3131A Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-5222 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-5222 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-1151C Series Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3121 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3121 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-1100 Manuale utente

Moxa Technologies

Moxa Technologies AWK-6232 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-6222 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-1137C Manuale utente

Moxa Technologies

Moxa Technologies AWK-3131 Manuale

Moxa Technologies

Moxa Technologies AirWorks AWK-3121-RTG Manuale utente

Moxa Technologies

Moxa Technologies AWK-3121B Series Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-6222 Manuale utente

Moxa Technologies

Moxa Technologies AWK-4131 Manuale utente

Moxa Technologies

Moxa Technologies AWK-4121 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-5222 Manuale utente

Moxa Technologies

Moxa Technologies WAC-1001 Series Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3121 Manuale utente

Moxa Technologies

Moxa Technologies AirWorks AWK-3131A Manuale utente

Moxa Technologies

Moxa Technologies AWK-3131A-RTG Series Manuale utente

Moxa Technologies

Moxa Technologies Airworks AWK-3131A-M12-RCC Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente