Moza Slypod Manuale utente
用户手册
MOZA Slypod
Battery and Charging
The MOZA Slypod comes with a built-in lithium battery. When charging for the first
time, please fully charge the Slypod to activate the battery. Solid red indicates
the Slypod is under charging, solid blue indicates the charging is completed. With
a Type-C interface, the Slypod is able to be charged by a mobile phone charger
or external power bank. It will automatically stop charging when the battery is full.
Note:
1. It’s recommended to use the original charging cable provided in the package!
2. Do not overcharge or over-discharge the battery, otherwise the battery cell will
be damaged.
3. If the battery is idle for a long time, please recharge and discharge it every 3
months to keep it active.
EN......................................................................................................................................1
CH......................................................................................................................................8
1
MOZA Slypod Overview
Adapter (accessory)
Handle
Power Button
Arca-Swiss
Quick Release 1/4” and 3/8” Extension Hole
Indicator Light
Quick Release
Screw
Operation Button
Charging Port
Quick Mounting
Port
Quick Mounting
Port
1/4” Extension Hole
1/4” to 3/8” Adapter Screw
There is a 1/4" extension screw hole on the top of the adapter, and it comes with a 1/4”
to 3/8” adapter screw to meet installation needs of different shooting devices.
Pan-tilt Head
主机
Main Body
2
Handle
Pan-tilt Head
Quick Mounting Port
Pan Knob Screw
Knob Screw
Quick Mounting
Port Pan-Tilt Lock
There is a 3/8" extension screw hole on the bottom of the handle, and it
comes with a 3/8" to 1/4" adapter screw to meet installation needs of
different shooting devices. (Such as monopod, tripod, etc.)
● Loosen the pan knob screw to adjust the pan angle; tighten the screw
to fix the pan angle.
● Loosen the tilt knob screw first, press it inward to rotate the quick release
baseplate to adjust the tilt angle (±90°)
● Stop pressing the screw, then tighten it to fix the tilt angle.
● Slide the quick release plate onto the baseplate, tighten the pan-tilt
lock to fix the release plate;
● Loosen the pan-tilt lock, press the safety lock to detach the release
plate from the baseplate;
● The quick release plate is equipped with1/4” and 3/8” screws to meet
different mounting needs.
1/4” Screw Hole
3/8” Screw Hole
3/8” to 1/4” Adapter
Screw
1/4” Screw Hole
Safety Lock
Pan-tilt Lock 3/8” Screw Hole
Quick Release
Baseplate
Quick Release Plate
3
Arca-Swiss Quick Release
Mounting the handle
Align the 1/4’’ screw hole on the handle with the 1/4’’ screw on the bottom of the
main body, turn the handle anticlockwise to tighten it.
Turn the handle clockwise to detach the handle from the main body.
Mounting
Mounting the pan-tilt head
Slide the pan-tilt head into the groove at the top of the pole, make part 1 and
part 2 fully fit. Turn the screw ring 3 clockwise to secure the head onto the pole.
Loosen the screw ring 3, then turn the knob screw 4 anticlockwise to detach the
head from the pole. After the P&T head is detached,reset the quick release knob.
(Mounting the adaptor) The same method as mounting the pan-tilt head.
Arca-Swiss quick release on the main body has a 1/4” screw hole and a 3/8”
screw hole to meet various extension needs. When the Slypod is horizontally
mounted on a tripod via the Arca-Swiss quick release, the Slypod can be
used as a motorized slider.
3/8” Screw Hole
1/4” Screw Hole
4
4
4
App Operation
Note: It's required to active the device according to instructions before first
operation. Please refer to the latest App version. When the Slypod is controlled
by the App, other buttons will be disabled except for the power button.
Getting Started
App Download
Scan the QR code below or search in the
App Store to download the MOZA Master
App.
Device Connection (Wireless)
Download the "MOZA Master" App.
a. Turn on the Slypod and mobile phone Bluetooth.
b. Launch the "MOZA Master", select the device to connect.
c. Enter the operation interface after connection is completed.
Button Operations
Power Button
Power on
Stop
Turn Off + Reset
(Blinking red)
Long
press
Click
once
Double
click
Triple
click
Photo taking control
via the shutter cable
Device status
Static
Static
Extend
Extend
Keep extending and
continue to accelerate
Keep retracting and
continue to accelerate
Retract
Retract
Click all three buttons at the same time: reset（blinking white）
Start to extend
Accelerate by one gear
Accelerate by one gear
Decelerate by one gear
Decelerate by one gear
Start to retract
Extend+
Start to extend and
continue to accelerate Retract and continue to
accelerate
Extending decelerates first,
then start to retract
Retracting accelerates
first, then start to extend
Long press +/- buttons at the same time: automatic
reciprocating mode (The blue light lasts for 1s
indicate a mode switch.)
Retract-
Long press for 3 seconds: Power on/off
IOS Android
5
Slide the red operation point to any position, the Slypod will move according to
the sliding path
● Regular Mode
● Segmentation Mode
Select the segmentation mode, add a path ( 5 paths can be added in
maximum), and then slide the operation point to any location. Set the running
time of each path separately. Tap to start and the device will move according to
the set path and speed.
Long press: Extending
Release: Stop extending
Moving speed setting
Current movement distance
Maximum extension length
Tap to start
Reset
path
Tap to
confirm
Tap to
reset
Path
number
Moving
up
Moving
down
Tap to the red
area to set the
running time
Path running
time setting
Tap “Confirm”
to complete
setting
Long press: Retracting
Release: Stop retracting
Beginning
(number shows
the distance from
the origin)
End (number
shows the
distance from
the origin)
6
● Color Setting
Enter the operation interface, select Color Setting, up to 5 kinds of indicator light
colors can be set based on personal preference.
Firmware Upgrade
Firmware is required to be upgraded in the charging state. Turn on the device, connect
it to the App, enter the operation interface and then start the firmware upgrade.
The device must be restarted after the upgrade succeeds. If the upgrade fails, the
process needs to be repeated until the upgrade succeeds.
● Step Time-lapse
Select step mode to set step length, cycle, residence time and step movement time.
After the setting is completed, tap “Start” and the device will move according to the set
step length, speed and cycle.
7
Calibration
Calibration is needed when there is abnormality with the device. There are two ways to
calibrate the Slypod: Click all three buttons (power, +, -) at the same time.Enter the
operation interface to start calibration in the App.
Please subscribe Gudsen MOZA official YouTube channel for the latest tutorials.
Charging
Uncover the rubber sleeve over the charging port, the Type-C interface is inside. The
Slypod can be charged by mobile phone charger, mobile power bank, etc. It will
automatically stop charging when the battery is full, please disconnect the charger then.
(It is recommended to use the original charging cable provided in the package)
Solid red
Solid blue
Status Indicator
Charging
Charging completed
Power on Solid green
Under-voltage alarm Solid orange
Low voltage alarm Blinking red + automatic reset &shutdown
(unable to power on when pressing the power button)
Blinking green for 1sStart/stop running switch
Blinking blue for 1s
Testing/operating
modes switch
Storage Length: 585mm（grip excluded）
Expanded Length: 996mm
Size
Weight
Max Diameter: 54mm
Main Body: 769g
PTZ Head: 310g
Grip:118g
Payload Vertical: 9kg
Horizontal: 4Kg
Operating speed Highest: 28mm/s
Lowest: 0.15mm/s
Operating Voltage 8.5v -12.6v
Battery Life
Working Temperature - 10℃- 50℃
Communication
Interface
Bluetooth
2.4G
Type-C
Battery Model Lithium ion Battery
Battery Capacity 600mA/h
Battery Voltage 11.1V
Type-C USBCharging Port
Charging Voltage 5V
Charging Time 90min
120min
Slypod
Specifications
8
电池及充电说明
Slypod使用内置锂电池，首次充电使用时，请先给Slypod充满电以激活电池，保证产品顺
利使用。红灯常亮表示设备充电中，蓝灯常亮显示充电完成。Slypod使用Type-C接口，手
机充电器、移动电源等都可以给Slypod充电，电池充满后将停止充电。
1.使用Slypod过程中，请使用包装内提供的原装充电线！
2.切勿过充、过放电池，否则将对电芯造成损害；
3.若长期闲置电池，请每隔3个月左右重新充放电一次以保持电池活性。
Altri manuali per Slypod
2
Indice
Altri manuali Moza Accessori per fotocamere
Moza
Moza Mini-S Manuale utente
Moza
Moza Mini-MI Manuale utente
Moza
Moza iFocus Manuale utente
Moza
Moza Air 2 Manuale utente
Moza
Moza Mini MX Manuale utente
Moza
Moza Air 2S Manuale utente
Moza
Moza Mini-MX Manuale utente
Moza
Moza AirCross 3 Manuale utente
Moza
Moza Slypod Manuale utente
Moza
Moza Mini MX 2 Manuale utente
Moza
Moza Mini-P Manuale utente
Moza
Moza AIR Manuale utente
Moza
Moza Mini-MX Manuale utente
Moza
Moza AirCross 2 Manuale utente
Moza
Moza Slypod E Manuale utente
Moza
Moza iFocus M Manuale utente
Moza
Moza NANO SE Manuale utente
Moza
Moza SLYPOD PRO Manuale utente
Moza
Moza AirCross 3 Manuale utente
Moza
Moza AirCross 2 Manuale di istruzioni
