READ ME FIRST!
As you ollow these instructions, you will notice
warning and caution symbols. This in ormation
is important or the proper, sa e and trouble ree
installation o the Linear Steam Head. These are
types o potential hazards that may occur i in-
stallation instructions are not care ully ollowed.
This signals a situation where injury or property
damage may occur i you do not ollow instructions.
IMPORTANT NOTE:
This highlights in ormation that is espe-
cially relevant to a problem- ree installation.
All in ormation in these instructions is based on the latest in orma-
tion available at the time o publication. Sussman-Automatic Corpo-
ration reserves the right to make changes at any time without notice.
1
Linear Steam Head®
mr
.steam
®
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Installation Instructions Model 104216
• Linear Steam Head model 104216 is suitable or MrSteam
generator models MS90 – MS400, MSSUPER1–
MSSUPER6 and CT6-CT15.
Do not use Linear Steam Head model 104216 or any
other MrSteam steam generator. Do not use the Linear
Steam Head with any steam generator that is not a
MrSteam steam generator. Failure to ollow these
instructions may result in a leak within the wall cavity and
cause problems associated with leaks, moisture and
property damage rom leaks.
• Do not use the Linear Steam Head with any steam
generator that is not a MrSteam steam generator. Failure
to ollow these instructions result in steam head operation
where incidental contact by the bather with direct steam
emission cannot occur. Do not locate the steam head in
any location where the steam emission zone is near a seat,
bench or any space occupied by any persons. Failure to
ollow these instructions may result in a hazardous
condition, scalding or personal injury.
Using model 104216 or any steam generator model larger
than the MS Super 3, or or any non MrSteam brand
generators may result in an improper installation or
hazardous condition.
• MrSteam steam generators Models SUPER 4, 5 & 6 require
two 104216 steam heads. Failure to use two steam heads
may result in steam head operation where incidental
contact by the bather with direct steam emission may
occur. Do not locate the steam head in any location where
the steam emission zone is near a seat, bench or any
space occupied by any persons. Failure to ollow these
instructions may result in a hazardous condition, scalding
or personal injury.
• Because the steam head and direct steam emission are
very hot, locate the steam head where incidental contact
by the user with the steam head or direct steam emission
cannot occur.
• Model 104216 Linear Steam Heads are or residential and
Day Spa use only. Do not use Model 104216 Linear Steam
CAUTIONS
!
Heads or commercial installations or with commercial
(CU) steam generators. Using Model 104216 Linear
Steam Heads or commercial installations or with
commercial (CU) steam generators may result in steam
head operation where incidental contact by the bather
with direct steam emission may occur. Failure to ollow
these instructions may result in a hazardous condition,
scalding or personal injury.
• Install in a horizontal orientation only. Installation in a
non-horizontal orientation may concentrate the steam
and result in excessive temperatures. Failure to install in
a horizontal orientation may result in steam head
operation where incidental contact by the bather with
direct steam emission may occur. Failure to ollow these
instructions may result in a hazardous condition, scalding
or personal injury.
• Insulate the steam head and piping as required to reduce
temperatures within the wall cavity. Do not locate the
steam head or plumbing near any materials, including
wiring, devices, or products that may be adversely
a ected by elevated temperatures. Failure to ollow
these instructions may result in the ailure o materials,
including wiring, devices, or products.
• Steam bath controls eature an integral temperature
sensor. Locate the steam head in a location where steam
emissions will not directly come in contact with the steam
control. Failure to ollow these instructions may result in a
hazardous condition, scalding or personal injury.
• Use the supplied high temperature silicone sealant or
equal silicone based product. Do not seal the steam
head with grout or any other material that may be
compromised adversely by heat.
• The Linear Steam Head model 104216 must be installed
by a quali ied and licensed plumber. Failure to use a
quali ied and licensed plumber may result in a leak within
the wall cavity and cause problems associated with leaks,
moisture and property damage rom leaks.
(continued on next page)
CAUTION
!
100561-1 Rev 7.18
mr
.steam
®
Sussman-Automatic Corp®
43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM ax: 718 472 3256
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM ax: 310 216 2944
