MSI 610BF Manuale utente

Chapter 1

1-1 Preface.....................................................................................................1

1-2 Key Feature..............................................................................................1

Chapter 2

Hardware Installation....................................................................................3

2-1 Unpacking.................................................................................................3

2-2 The Diagram of 610BF 612BF.................................................................4

2-3 Quick Reference for Jumpers, Connectors & Expansion Socket.............5

2-4 Installation Steps......................................................................................6

2-5 Jumper Settings........................................................................................6

2-6 System Memory (DRAM)..........................................................................8

2-7 Central Processing Unit (CPU).................................................................8

2-8 Expansion Cards......................................................................................9

2-9 External Connectors.................................................................................10

Chapter 3

AWARD BIOS SETUP...................................................................................1

3-1 STANDARD CMOS SETUP.....................................................................17

3-2 BIOS FEATURES SETUP........................................................................20

3-3 Advanced Chipset Features Setup..........................................................22

3-4 Integrated Periperals................................................................................24

3-5 POWER MANAGE MENT SETUP ...........................................................27

3-6 PNP PCI CONFIGURATION SETUP........................................................29

3-7 PC Health Status.......................................................................................31

3-8 Frequency Voltage Control........................................................................31

3-9 Defaults Menu............................................................................................32

3-10 Supervisor User Password Setting...........................................................32

3-11 EXIT Selecting.........................................................................................33

3-12 POST Messages.....................................................................................33

3-13 POST Codes............................................................................................37

Chapter 4

10BF/ 12BF Driver Installation.............................................................43

4-1 Software Installation ....................................................................................43

4-2 Keyboard Password Hot-Key PS 2 Mouse Power On..................................44

TABLE OF CONTENT

Chapter 1

1-1 Preface

Thank you for chosen 610BF 612BF mainboard. It is a multifunction motherboard with most

flexibility you can find in today’s computer market. The motherboard integrate Celeron TM

(PPGA) processor interface into a compact PC AT compatible system along with PCI local bus

and the most recent interface AMR (Audio Modem Riser card). Moreover, this motherboard

using newest DDM (Dynamic Display Memory) architecture to increase systems display

performance and many other new feature that meets future specification.

1-2 Key Feature

The 610BF 612BF are design for the PC user who wants highest possible quality and value in

a small package . This motherboard include:

Support Jumpless solution,can setting Front Side Bus Frequency (CPU Host Clock)

,and CPU ratio in BIOS SETUP “Frequency / Volotage Control“.

Built-In High performance 3D AGP VGA:

Support 1MB share memory for VGA.

Include 4MB Display Cache (For 612BF only).

3D Hyper Pipelined Architecture.

3D Graphics Visual Enhancements.

3D Graphics Texturing Enhancements.

Up to 1600x1200 in 8-bit Color at 85Hz Refresh.

H W Motion Compensation Assistance for S W MPEG2 Decode.

Software DVD at 30fps.

Built-In High performance 3D Audio:

Fully Compliant AC97 Analog I O Component.

48-Terminal TQFP package.

Multibit △ Converter Arhitecture for improved S N ratio greater than 90dB.

16-Bit Stereo Full-Duplex Codec.

4 Analog Line-Level Stereo Input.

High Quality CD Input with Ground Sense.

Stereo Line Level Output.

Multi-Speed Support : Provide 66 75 83 95 100 112 117 124 133MHz Front Side Bus

Frequency to support Intel Celeron PPGA on a ZIF socket 370 interface.

 Chipset: Intel 810L Chiset for 610BF; Intel 810 DC-100 Chipset for 612BF.

 DRAM Memory Support: support two 168-pin DIMMS(3.3V)from a memory size between

8MB to 256MB using 16Mb 64Mb technology ( 512MB using 128Mb technology ).

AMR and PCI expansion Slots: Provide one AMR slot, four PCI slot.

Super Multi-I/O: Provides two high-Speed UART compatible serial ports and one parallel

port with EPP and ECP capabilities. Two floppy drives of either 5.25” or 3.5” (1.44MB or

2.88MB) are also supported without an external card.

PCI Bus Master IDE Controller and ULTR DMA 33, 33/66 (for 612B only) : On-board PCI

Bus Master IDE controller with two connectors that supports four IDE devices in two

channels, provides faster data transfer rates, and supports Enhanced IDE devices such as

Tape Backup, CD-ROM 、ZIP、LS-120 Drives. This controller also supports PIO Modes and

Bus Master IDE DMA 33 66 MB S.

ACPI supporting for OS Directed Power Management

Keyboard /PS/2 Mouse Power On: When use ATX power supply and JP6 1-2 closed,

choose power on function by password in BIOS , can control power supply on by keyboard

instead of power button .

Ring-in Wake up: When Ring-In the system can wake up from SMI Mode.

Ring-in Power On: When Ring-In the system can power on automatic by this function.

Wake on Lan: When Wake on Lan the system can power on automatic by this function.

RTC Power On: Enabled RTC Power On function, you can setting RTC alarm to power on

the system at the time length you setting .

Power Button: Press the button will place the system power on off.

Support Software Power OFF Function.

Power Support: Efficient PWM switching power instead of traditional Linear Voltage

Regulator to prevent power component from being burned-out.

Meets PC99 Requirements.

Optional IRDA and PS/2: This motherboard supports an dedicated 16C550 standard

UART,supporting infrared communication module for wireless interface and PS 2 mouse

cable set.

USB Port Connector: This motherboard supports two USB port connectors for USB devices.

PC Health Monitoring : To track PC CPU temperature, system voltage and fan speed.

When current temperature over warning temperature system will have alarm to warning.

AC recovery ON/O control by BIOS

Baby AT Form Factor: Dimensions 22cm x 22cm.

Chapter 2

Hardware Installation

2-1 Unpacking

This mainboard package should contain the following:

The 610BF 612BF mainboard

USER’S MANUAL for mainboard

Cable set for IDE x1, Floppy x1 ,COM x1

CD for Drivers PACK

The mainboard contains sensitive electronic components which can be easily damaged by

electron-static, so the mainboard should be left in its original packing until it is installed.

Unpacking and installation should be done on a grounded anti-static mat.

The operator should be wearing an anti static wristband, grounded at the same point as the

anti-static mat.

Inspect the mainboard carton for obvious damage. Shipping and handling may cause damage

to your board. Be sure there are no shipping and handling damages on the board before

proceeding.

After opening the mainboard carton, extract the system board and place it only on a grounded

anti-static surface component side up. Again inspect the board for damage.

Press down on all of the socket IC’s to make sure that they are properly inserted. Do this only

on with the board placed on a firm flat surface.

Warning: Do not apply power to the board if it has been damaged.

You are now ready to install your mainboard. The mounting hole pattern on the mainboard

matches the IBM-AT system board.

It is assumed that the chassis is designed for a standard IBM XT AT main board mounting.

Place the chassis on the anti-static mat and remove the cover.

Take the plastic clips, Nylon stand-off and screws for mounting the system board, and keep

them separate.

2-2 10BF/ 12BF Motherboard Diagram

Figure 2-1

2.3 Quick Reference for Jumpers, Connectors &

Expansion Socket

Jumpers

Jumper Name Description Page

JP1 CPU Bus Frequency Selection 1-2 :100MHZ , 2-3:66MHz p. 6

JP3 V I O Voltage 1- 2 :For V I O 3.45V (Default)

3-4 :For V I O 3.52V p.7

JP6 Keyboard Power on Function (K.B.Voltage) 1-2 : 5VSB for ATX Power Supply

2-3 : VCC p. 8

JP7 Case cover open detection 2-Pin Block p. 7

JP9 Clear Keyboard Power On Password setting 1-2 Default ; 2-3 Clear Password p. 7

JP12 Codec Master Slave Mode Control 1-2 Master ; 2-3 slave p. 7

JP13 CMOS RAM Clear 1-2 Default for R.T.C. ; 2-3 Reset R.T.C. p. 6

Connectors

Connector Name Description Page

JKB1 Keyboard Connector 5-Pin Female p.10

USB PORT USB Port Connector 10-Pin Block p.13

JMS1 PS 2 MouseConnector 6-Pin Block p.11

COM1,COM2 Serial Port COMA&COMB 10-Pin Block p.11

LPT1 Parallel Port Connector 26-Pin Block p.11

FDD1 Floppy Driver Connector 34-Pin Block p.11

IDE1 Primary IDE Connector 40-Pin Block p.12

IDE2 Secondary IDE Connector 40-Pin Block p.12

VGA1 VGA Connector 16-pin Block p.14

FAN1

FAN2,FAN3

FAN Connector 1-2 12V Power Connector

2-3 ACPI FAN power control Connector

p.13

IR1 Infrared Module Connector 10-Pin Block p.13

P1 AT Power Connector 12-Pin Block p.10

ATPW1 ATX power Connector 20-Pin Block p.10

IDELED IDE activity LED 2-Pin Connector p.12

JP15 Front Panel Connector 16-Pin Block p.13

PWRBTN ATX power button 2-pin Connector Connector p.14

Audio Port Audio connector 10-pin Connector p.14

Game Port Game port connector 16-pin connector p.14

J5 CD-Audio Sony 4-pin Block p.15

J6 CD-Audio Panasonic 4-pin Block p.15

WOL1 Wake On Lan 3-pin Block P.15

Expansion Sockets

Socket/Slot Name Description

DIMM1,DIMM2, DIMM Module Socket 168-Pins DIMM SDRAM Module Expansion Socket

Zip Socket370 CPU Socket Celeron PPGA CPU Socket

AMR1 AMR SLOT Modem Riser Card

PCI1, PCI2,PCI3 ,PCI4 PCI Slot 32-bits PCI Local Bus Expansion slots

2-4 Installation Steps

Before using your computer, you must follow the steps as follows:

1. Set Jumpers on the Motherboard

2. Install the CPU

3. Install DRAM Modules

4. Install Expansion card

5. Connect Cables, Wires, and Power Supply

2-5 Jumper Settings

1. CPU Bus requency Selection : JP1

※Users also can setting the CPU Bus frequency and CPU ratio in the “ requency / Voltage

Control “of BIOS SETUP.

Table for the Socket370 Cpu

CPU Type CPU Clock Ratio CPU requency

Celeron-300 300A 66 MHz 4.5X 300 MHz

Celeron-333 66 MHz 5.0X 333 MHz

Celeron-366 66 MHz 5.5X 366 MHz

Celeron-400 66 MHz 6.0X 400 MHz

Celeron-433 66 MHz 6.5X 433 MHz

Celeron-466 66 MHz 7.0X 466 MHz

※Before install CPU please check the CPU Sepecification , and setting the correct CPU Bus

requency ( ront Side Bus) and ratio in the “CHIPSET EATURES SETUP” of BIOS

SETUP.

2. CMOS RAM Clear: JP13 (Yellow color selector)

WA NING: Make sure your computer is POWE OFF when you CLEA CMOS.

Connect a jumper Cap over this jumper for a few seconds, will clears information stored in

the CMOS RAM Chip that input by user, such as hard disk information and passwords.

After CLEAR CMOS, you must enter the BIOS setup (by holding down <DEL> during

power-up) to re-enter BIOS information (see BIOS SETUP).

Selections JP13

Normal 1-2 Default for R.T.C.

Clear CMOS 2-3 Reset R.T.C.

Note: You need clear keyboard Power On Password setting(JP9) before you clear CMOS data if you do

not remember your assword.

3. Codec Master / Slave Mode Control: JP12

4. Case cover open detection: JP7

5. Clear Keyboard Power On Password setting: JP9

. V I/O Voltage: JP3

7. Keyboard Power on Function: JP

This function only support when use ATX power supply . When choose 1-2 closed

and use ATX power supply , you can choice power on system by power button or

keyboard in “Power On Function” item of “Integrated Peripherals Setup”.

2- System Memory (DRAM)

This main board supports two 168-pins DIMM modules, the Max Memory Size is

256MB(512MB using 128Mb technology).

DIMM 1 DIMM 2 System can be

Accept or Not

168-pin DIMM Accept

168-pin DIMM 168-pin DIMM Accept

168-pin DIMM Accept

2-7 Central Processing Unit (CPU)

2-7-1 The mainboard provides a 370-pin ZIF Socket 370. The CPU on motherboard must have

a fan attached to prevent overheating.

WA NING: Without a fan or heat sink, the CPU will overheat and cause damage to both the CPU

and the motherboard.

To install a CPU, first turn off your system and remove its cover. Locate the ZIF socket and

open it by first pulling the lever sideways away from the socket then upwards to a 90-degree

right angle. Insert the CPU with the white dot as your guide. The white dot should point

towards the end of the level. The CPU has a corner pin for three of the four corners, the CPU

will only fit in the one orientation as shown as follow. With the added weight of the CPU fan, no

force is required to insert the CPU. Once completely inserted, hold down on the fan and close

the socket’s lever.

IMPO TANT: You can setting the CPU ratio and Host Frequwncy in the BIOS setup on page 30

2-8 Expansion Cards

You must read the documentation come with expansion card for any hardware or software

settings that may be required to setup your specific card.

Installation Procedure:

1. Read the documentation from your expansion card.

2. Set any necessary jumpers on your expansion card.

3. Remove your computer’s cover.

4. Remove the bracket on the slot you intend to use.

5. Carefully align the card’s connectors and press firmly.

6. Secure the card on the slot with the screw you remove in step 4.

7. Replace the computer’s cover.

8. Setup the BIOS if necessary.

9. Install the necessary software drivers for your expansion card.

Assigning IRQs for Expansion Cards

Some expansion cards may require an IRQ to operate. Generally an IRQ must be exclusively

assigned to only one device. In an standard design there are 16 IRQs available but most of

them are occupied by the system and leaves 6 free for expansion cards.

With most recent device, the BIOS automatically assign an IRQ number to PCI expansion

cards. Please make sure there are no any of two devices use same IRQs, otherwise your

computer may experience some problems when those two devices are in use at the same time.

Assigning DMA Channels for Expansion Cards

Some devices may also need to use a DMA (Direct Memory Access) channel. DMA

assignments for this motherboard are handled the same way as the IRQ assignment process

described above. You can select a DMA channel in the PCI and PNP configuration section of

the BIOS Setup utility.

2-9 External Connectors

1. Power Connector: ATX Power Connector (12-pin block): P1

This connector connects to a standard AT power supply. To connect the leads from the

power supply, ensure first that the power supply is not plugged. Most power supplies

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali MSI Scheda madre

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente