MSI ATX BX10 Manuale utente

CHAPTER 1CHAPTER 1

CHAPTER 1 INTRODUCTIONINTRODUCTION

INTRODUCTIONINTRODUCTION

INTRODUCTION

1-1

The ATX BX10 mainboard is a high-performance personal computer

mainboard based on the Intel®Socket 370 processor. The Intel®Socket 370

processor supports MMXTM (Multimedia Extension) technology.

The mainboard uses the highly integrated Intel®82443BX AGP chipset to

support the PCI/ISA and Green standards, and to provide the Host/AGP

bridge. The Intel®82371EB chipset integrates all system control functions

such as ACPI (Advanced Configuration and Power Interface). The ACPI

provides more Energy Saving Features for the OSPM(OS Direct Power

Management) function. The Intel®82371EB chipset also improves the IDE

transfer rate by supporting Ultra DMA/33 IDE that transfers data at the rate

of33MB/s.

The mainboard also supports the System Hardware Monitor Controller. Its

functions include: CPU /power supply/chassis fan revolution detect, CPU/

system voltage monitor, system temperature monitor, chassis intrusion

detect and TOP TECH II as an optional function.

Chapter 1

INTRODUCTION

CHAPTER 1CHAPTER 1

CHAPTER 1 INTRODUCTIONINTRODUCTION

INTRODUCTIONINTRODUCTION

INTRODUCTION

1-2

1.1 Mainboard Features

CPU

lSocket 370 for Intel®CeleronTM processor

lSupports300MHz,333MHz,366MHz,400MHz,433MHz,466MHzand

faster.

Chipset

lIntel®82443BX/PIIX4Echipset.

FSB(FrontSide Bus)

l66.6MHz, 100MHz and faster clocks are supported.

MainMemory

lSupports six memory banks using three 168-pin unbuffered DIMM.

lSupportsa maximummemorysize of384MB (8M x8) or 768MB(16M x4)

registered DIMM only.

lSupportsECC(1-bitErrorCodeCorrect)function.

lSupports 3.3v SDRAM DIMM.

Slots

lOne AGP slot.

- AGP specification compliant

- AGP66/133MHz3.3vdevicesupport

lFive 32-bit Master PCI Bus slots and two 16-bit ISA Bus slots (wherein

one PCI/ISA slot is shared).

*See Chapter 2-26 for further details on PCI slots.

lSupports 3.3v/5v PCI bus Interface.

On-BoardIDE

lAn IDE controller on the Intel®PIIX4E PCI Chipset provides IDE HDD/

CD-ROM with PIO, Bus Master and Ultra DMA/33 operation modes.

lCan connect up to four IDE devices.

CHAPTER 1CHAPTER 1

CHAPTER 1 INTRODUCTIONINTRODUCTION

INTRODUCTIONINTRODUCTION

INTRODUCTION

1-3

On-BoardPeripherals

lOn-BoardPeripheralsinclude:

-1floppyportsupports2FDDwith360K,720K,1.2M,1.44Mand

2.88Mbytes.

-2serialport(COMA)+ (COMB)

- 1 parallel port supports SPP/EPP/ECP mode

- 2 USB ports

- 1 IrDA connector for SIR.

- 1 Audio port ( Line_Out, Line_In, and Mic_In Jack) and 1 MIDI/

GamePort

Audio (Optional)

lCreative®ES1373AudioController

- 64 Voice wavetable synthesizer

-DOSGameCompatibility

-AC3Capable

-AC97’Compliant

BIOS

lThe mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

lThe mainboard provides a Desktop Management Interface(DMI) function

which records your mainboard specifications.

lACPI(Advanced Configuration and Power Interface) feature.

Dimension

lATXFormFactor: 30cm(L) x19.2cm(W) x4layers PCB

Mounting

l6 mounting holes.

CHAPTER 1CHAPTER 1

CHAPTER 1 INTRODUCTIONINTRODUCTION

INTRODUCTIONINTRODUCTION

INTRODUCTION

1-4

SystemHardwareMonitor

lCPU/Power Supply/Chassis Fan Revolution Detect

lCPU Fan Control detects the CPU temperature, then determine the FAN

SPEED,whichutilizesPCAlert program (the fan will automatically stop

when the system enters suspend mode)

lSystem Voltage Detect

lAdded 5VSB and Battery Voltage Detect

lCPU Overheat Warning.

lDisplay Actual Current Voltage

lChassis Intrusion

OtherFeatures

lKeyboard Password Wake-Up

lLAN Wake-Up

lInternal/External Modem Wake-Up

lSB_LinkReady

CHAPTER 1CHAPTER 1

CHAPTER 1 INTRODUCTIONINTRODUCTION

INTRODUCTIONINTRODUCTION

INTRODUCTION

1-5

1.2 Mainboard Layout

MS-6153 ATX BX10 Mainboard

PCI SLOT 3

PCI SLOT 2

PCI SLOT 1

ISA SLOT 2

ATX

Power Supply

FW82443BX

Socket 370

DIMM 2

Top: Mouse

Bottom:

Keyboard

Top:Port1

USB

DIMM 1

IDE2

Bottom:

Port2

IDE1

FDD

FW82371EB

JMDM1

JRMS1

JFP

JGS1

JBAT1

J6:MDM_IN

J5: AUX_IN

CPUFAN

PSFAN

BATT

Top: LPT

Bottom:

COM1/

COM2

Top: Midi/

GamePort

Bottom:

Line-Out

Line-In

Mic

J4: CD_IN

JVBS1

System

Hardware

Monitor

AGP SLOT

DIMM 3

PCI SLOT 4

PCI SLOT 5

ISA SLOT 1

JWOL1

SYSFAN

WINBOND

W83977EF-

Creative

ES1373

(optional)

SW1

BIOS

SB_Link

JGL1

JCASE

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-1

CPU

Chapter 2

HARDWARE INSTALLATION

2.1 Central Processing Unit: CPU

The mainboard operates with Intel®CeleronTM processor. The mainboard

uses a CPU socket called Socket 370 for easy CPU installation. The CPU

should always have a Heat Sink and a cooling fan attached to prevent

overheating.

3. Press the lever down to

complete the installation.

2. Locate Pin 1 in the socket

and look for the white dot or

cut edge in the CPU. Match

Pin 1 with the white dot/cut

edge. Then, insert the CPU.

It should insert easily.

OpenLever

Pin1

Sliding

Plate

White dot/

Cut edge

Lever

1. Pull the lever sideways away

from the socket. Then, raise

the lever up to a 90-degree

angle.

2.1-1 CPU Installation Procedures

Pin1

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-2

2.1-2 CPU Core Speed Derivation Procedure (SW1)

1. If the CPU Core/Bus ratio is already fixed, adjusting the SW1 will not

change the CPU Core/Bus ratio. If the Core/Bus ratio is not fixed by the

CPU, then you can adjust the SWI to change the Core/Bus ratio.

If CPUClock = 66MHz

Core/Bus ratio = 3.5

then CPU core speed = Host Clock x Core/Bus ratio

= 66MHzx3.5

= 233MHz

SW1

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-3

1 2 3 4 Core/Bus Ratio

ON ON OFF ON 3

ON OFF OFF ON 3.5

ON ON ON OFF 4

ON OFF ON OFF 4.5

ON ON OFF OFF 5

ON OFF OFF OFF 5.5

OFF ON ON ON 6

OFF OFF ON ON 6.5

OFF ON OFF ON 7

OFF OFF OFF ON 7.5

OFF ON ON OFF 8

SW1 CPU

ON = Short OFF = Open

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-4

2.1-3 CPU Bus Frequency Selector: J9

The J9 is used to set the CPU Bus Frequencies from 66MHz to 100MHz.

When J9 is shorted, this will automatically detect the CPU Bus Frequency.

When J9 is open, if you used 66MHz CPU, the Bus Frequency will set

virtuallyinto 100MHz.

J9 Feature

Automatically detect 66MHz and

100MHz CPU Bus Frequency

Virtually set 66MHz CPU Bus

Frequency into 100MHz

NOTE: 1.Thisfeatureworkswith66MHzFSBonly.

2. If your CPU FSB supports 66MHz and you want to run it

on 100MHz FSB, the J9 should be open. The AGP Bus will be

set to run at 100MHz x 2/3=66MHz to make it stable.

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-5

2.1-4 Fan Power Connectors: CPUFAN/PSFAN/SYSFAN

These connectors support system cooling fan with +12V. It supports three

pin head connector. When connecting the wire to the connector, always

take note that the red wire is the positive and should be connected to the

+12V, the black wire is Ground and should be connected to GND. If your

mainboard has System Hardware Monitor chipset on-board, you must use a

specially designed fan with speed sensor to take advantage of this function.

For fans with fan speed sensor, every rotation of the fan will send out 2

pulses. System Hardware Monitor will count and report the fan rotation

speed.

SENSOR

+12V

GND

PSFAN

SENSOR

+12V

GND

CPUFAN

PSFAN : Power Supply Fan

CPUFAN : Processor Fan

SYSFAN : System(Chassis) Fan

Note: 1. Always consult vendor for proper CPU cooling fan.

2. CPU FAN supports the FAN control, you can install PC Alert

utility, this will automatically set the CPU FAN Speed by CPU

temperature.

SENSOR

+12V

GND

SYSFAN

Indice

Altri manuali MSI Scheda madre

MSI

MSI MS-7199 Manuale utente

MSI

MSI MS-6315 Manuale utente

MSI

MSI P55 GD80 - Motherboard - ATX Manuale utente

MSI

MSI 7B54-001R Manuale utente

MSI

MSI MPG Z390I GAMING EDGE AC Manuale utente

MSI

MSI A520M PRO-VDH Manuale utente

MSI

MSI P7N DIAMOND - Motherboard - ATX Manuale utente

MSI

MSI P4M900M Manuale utente

MSI

MSI MPG Z490M GAMING EDGE WIFI Manuale utente

MSI

MSI P55A Fuzion Series Manuale utente

MSI

MSI H270M PRO-VDH Manuale utente

MSI

MSI 650GLMS Manuale utente

MSI

MSI H81M-E35 Manuale utente

MSI

MSI H410M PRO Manuale utente

MSI

MSI MS-6390 Manuale utente

MSI

MSI MEG X570 GODLIKE Manuale utente

MSI

MSI Z87-G43 GAMING Manuale utente

MSI

MSI PRO B760-P WIFI Manuale utente

MSI

MSI MPG Z490 GAMING EDGE WIFI Manuale utente

MSI

MSI Z370 TOMAHAWK Manuale utente

MSI

MSI H55M-E32 Manuale utente

MSI

MSI Z490 GAMING CARBON WIFI Manuale utente

MSI

MSI PRO Z790-A WIFI Manuale utente

MSI

MSI MPG B560I Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente