MSI MS-6382 Manuale utente
i
Version 2.0
G52-MA00563
MS-6382 (v2.X) Micro ATX Mainboard
MSI
MICRO-STAR INTERNATIONAL
ii
Micro-Star International MS-6382
Tested to comply
with FCC Standard
For Home or Office Use
Manual Rev: 2.0
Release Date: March 2002
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party respon-
sible for compliance could void the users authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE DINSTALLATION AVANT DE RACCORDER AU
RESEAU.
iii
Edition
March 2002
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL. We take every care in the preparation of this document,
but no guarantee is given as to the correctness of its contents. Our products
are under continual improvement and we reserve the right to make changes
without notice.
Trademarks
All trademarks are the properties of their respective owners.
Intel®and Pentium®are registered trademarks of Intel Corporation.
PS/2 and OS®/2 are registered trademarks of International Business Machines
Corporation.
Windows®95/98/2000/NT/XP are registered trademarks of Microsoft
Corporation.
Netware®is a registered trademark of Novell, Inc.
Award®is a registered trademark of Phoenix Technologies Ltd.
AMI®is a registered trademark of American Megatrends Inc.
Revision History
Revision Revision History Date
2.0 First Release for PCB 2.X March 2002
iv
Safety Instructions
1. Read the safety instructions carefully.
2. Save this Users Guide for possible use later.
3. Keep this equipment away from humidity.
4. Lay this equipment on a stable and flat surface before setting it up.
5. The openings on the enclosure are used for air convection and to prevent
the equipment from overheating. Note: Do not cover the openings.
6. Make sure that the power voltage is within its safety range and has been
adjusted properly to the value of 110/220V before connecting the equip-
ment to the power inlet.
7. Place the power cord in a way that people are unlikely to step on it. Do not
place anything on the power cord.
8. Always unplug the power cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening that could damage the equipment
or cause an electrical shock.
11. If any of the following situations arises, get the equipment checked by a
service personnel:
lthe power cord or plug is damaged
lliquid has penetrated into the equipment
lthe equipment has been exposed to moisture
lthe equipment has not work well or you can not get it work according
to Users Guide
lthe equipment was dropped and damaged
lthe equipment has obvious signs of breakage
12. Do not leave the equipment in an unconditioned environment with a stor-
age temperature of 600 C (1400F) or above, which may damage the
equipment.
CAUTION: To prevent explosion caused by improper battery
replacement, use the same or equivalent type of battery recommended
by the manufacturer only.
v
CONTENTS
Chapter 1. Getting Started ........................................................................ 1-1
Mainboard Specification ...................................................................... 1-2
Mainboard Layout ............................................................................... 1-4
Quick Components Guide .................................................................... 1-5
Chapter 2. Hardware Setup ....................................................................... 2-1
Central Processing Unit: CPU .............................................................. 2-2
CPU Installation Procedures ......................................................... 2-2
Thermal Issue for CPU .................................................................. 2-3
CPU Core Speed Derivation Procedure ......................................... 2-3
Memory ................................................................................................ 2-4
Introduction to DDR SDRAM ....................................................... 2-4
DDR Module Combination ............................................................ 2-5
Installing DDR Modules ............................................................... 2-5
Power Supply ....................................................................................... 2-6
ATX 20-Pin Power Connector: JWR1 ............................................ 2-6
Back Panel ............................................................................................ 2-7
Mouse Connector ......................................................................... 2-7
Keyboard Connector ..................................................................... 2-8
USB Connectors ............................................................................ 2-8
Serial Port Connectors: COM A & COM B.................................... 2-9
Joystick/Midi Connectors ............................................................. 2-9
Audio Port Connectors ................................................................. 2-9
Parallel Port Connector: LPT1 ...................................................... 2-10
RJ-45 LAN Jack (optional) ........................................................... 2-11
vi
Connectors ......................................................................................... 2-12
Floppy Disk Drive Connector: FDD1........................................... 2-12
Chassis Intrusion Switch Connector: J1 ...................................... 2-12
Hard Disk Connectors: IDE1 & IDE2 ........................................... 2-13
CD-In Connector: CD_IN ............................................................ 2-14
Aux Line-In Connector: AUX_IN ................................................ 2-14
Modem-In Connector: MODEM_IN ........................................... 2-14
Fan Power Connectors: CFAN1/SFAN1 ...................................... 2-15
Power Saving LED Connector: JGL1 ........................................... 2-16
Power Saving Switch Connector: JGS1........................................ 2-17
IrDA Infrared Module Header: FPIR ........................................... 2-17
Front Panel Audio Connector: JAUD1 ........................................ 2-18
Front Panel Connectors: JFP1 & JFP2 ......................................... 2-19
Front USB Connector: USB1 ....................................................... 2-20
Jumpers .............................................................................................. 2-21
Clear CMOS Jumper: JBAT1 ........................................................ 2-21
CPU Clock Frequency Selection: SW1 ........................................ 2-22
Slots ................................................................................................... 2-23
AGP Slot ...................................................................................... 2-23
PCI Slots ...................................................................................... 2-23
CNR (Communication Network Riser) ......................................... 2-23
PCI Interrupt Request Routing .................................................... 2-24
Chapter 3. AWARD® BIOS Setup ............................................................ 3-1
Entering Setup...................................................................................... 3-2
Control Keys ................................................................................. 3-2
Getting Help .................................................................................. 3-3
The Main Menu ................................................................................... 3-4
Standard CMOS Features .................................................................... 3-6
vii
Advanced BIOS Features .................................................................... 3-8
Advanced Chipset Features............................................................... 3-12
Integrated Peripherals ........................................................................ 3-16
Power Management Setup ................................................................. 3-21
PNP/PCI Configurations..................................................................... 3-26
PC Health Status ................................................................................ 3-29
Frequency/Voltage Control ................................................................ 3-30
Load Fail-Safe/Optimized Defaults ..................................................... 3-31
Set Supervisor/User Password ........................................................... 3-32
Glossary .................................................................................................... G-1
Getting Started
1-1
Chapter 1. Getting Started 1
Getting Started
The MS6382 v2.X Micro-ATX mainboard is a high performance
computer mainboard based on VIA KT266A & VT8233A chipsets. The
KT266A chipset is ideal for high quality and high integration desktop and
notebook AGP/PCI/LPC computer systems based on Socket A processors.
The VT8233A V-Link Client controller is a highly integrated PCI/LPC
controller. It supports three PCI slots of arbitration and decoding for all
integrated functions and LPC bus.
For sophisticated power management, the KT266A chipset provides
independent clock stop control for the SDRAM, PCI buses and Dynamic
CKE control for powering down of the SDRAM. A seperate suspend-well
plane is implemented for the SDRAM control signals for the Suspend-to-
DRAM operation.
TOPICS
Mainboard Specification 1-2
Mainboard Layout 1-4
Quick Components Guide 1-5
Chapter 1
1-2
Mainboard Specification
CPU
Socket 462 (Socket A) for AMD®DuronTM/AthlonTM processor with 200/
266MHzFSB
Support 600MHz up to 1.5GHz processor
Chipset
VIA®KT266A Chipset
- Support 66MHz V-Link Host interface with peak bandwidth of 266MB/s
- Advanced ECC memory controller supporting PC133/PC100 SDR
SDRAM and PC2100/1600 DDR SDRAM
- Full featured AGP Controller: AGP v2.0 compliant
VIA®VT8233A Chipset
- High bandwidth V-Link client controller
- Integrated faster Ethernet controller
- Direct sound ready AC97 digital audio controller
- Ultra DMA 33/66/100/133 master mode EIDE controller
- Support both ACPI and legacy APM power management
Clock Generator
Cypress CY28341OC rev. D (support 2 DDR DIMM)
MainMemory
Support four memory banks using two 184-pin (100/133MHz) DDR DIMM
Support a maximum memory size of 2GB
Slots
One (Accelerated Graphics Port) AGP slot
One CNR (Communication Network Riser) slot
Three 32-bit Master PCI Bus slots
- 3rd PCI with MEDION specification reserved
Supports 3.3v/5v PCI bus Interface
On-BoardIDE
Dual Channel master mode IDE controller on the VIA®VT8233A Chipset
provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA 33/66/
100/133 operation modes
Can connect up to four IDE devices
Getting Started
1-3
Audio
2 channels S/W Audio CODEC, Realtek ALC201A
AC97s digital link controller was integrated in VIA VT8233A
On-Board Peripherals
On-Board Peripherals include:
- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and 2.
88Mbytes.
- 2 serial ports (COMA + COM B)
- 1 parallel port supports SPP/EPP/ECP mode
- 4 USB ports (2 x Rear / 2x Front)
- 1 Audio/Game port
- 1 optional RJ-45 LAN jack (Reaktek RTL8100BL)
BIOS
The mainboard BIOS provides Plug & Play BIOS which detects the
peripheral devices and expansion cards of the board automatically.
The mainboard provides a Desktop Management Interface (DMI) func-
tion which records your mainboard specifications.
Dimension
M-ATX Form Factor: 9.6 in. x 8.25 in.
Mounting
6 mounting holes
Others
Support STR/STD (S3/S4)
Support PS2/USB KBD/Mouse Wakeup function in S3 mode
PC 2001 Compliance
Support Chassis Intrusion Detection & SIR
Altri manuali per MS-6382
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali MSI Scheda madre
MSI
MSI Z790 GAMING PRO WIFI Manuale utente
MSI
MSI MAG B660 TOMAHAWK WIFI DDR4 Manuale utente
MSI
MSI K9A2GM V2 Series Manuale utente
MSI
MSI B75A-G43 seres Manuale utente
MSI
MSI P55 GD80 - Motherboard - ATX Manuale utente
MSI
MSI KT6-V Manuale utente
MSI
MSI B560-A PRO Manuale utente
MSI
MSI MPG Z590 GAMING CARBON WIFI Manuale utente
MSI
MSI PRO B650-S WIFI Manuale utente
MSI
MSI H170A GAMING PRO Manuale utente
MSI
MSI MEG Z490 ACE Manuale utente
MSI
MSI MS-6523 Manuale utente
MSI
MSI Z68A-GD65 series Manuale utente
MSI
MSI Z790-S01 Manuale utente
MSI
MSI Z87I Manuale utente
MSI
MSI MAG B760 TOMAHAWK WIFI Manuale utente
MSI
MSI X79A-GD65 (8D) Series Manuale utente
MSI
MSI 990FXA Manuale utente
MSI
MSI MAG B460 TORPEDO Manuale utente
MSI
MSI MS-6309 Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
