Multitech MultiConnect microCell MTCM2 Manuale utente
MultiConnect®microCell Cellular Modem
MTCM2 Quick Start
MultiConnect®microCell Cellular Modem MultiTech Systems MultiConnect®microCell Cellular Modem MultiTech Systems
Quick Start Quick Start
Installing a SIM Card
To operate the device, you need a micro SIM card (3FF) from your
network provider.
To install the SIM card:
1. Locate the SIM card slot on the device. It is labeled SIM.
2. Push the SIM card into the slot with the contact side facing
up as shown. The SIM card locks into place.
Installing the Device
1. Install drivers on your computer. Go to
https://www.multitech.com/brands/multiconnect-microcell,
select your model, and click Downloads.
2. Connect antennas to the antenna connectors.
3. Connect the USB connector to your computer, either
directly or through a hub.
The USB connection powers the device and the POWER LED lights.
Regulatory Information
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
For additional regulatory information, see your device’s user guide or go
to your device’s page at http://www.multitech.com
MultiConnect®microCell Cellular Modem (MTCM2)
Document Part Number: 82104700L
Copyright and Trademarks
This publication may not be reproduced, in whole or in part, without the
specific and express prior written permission signed by an executive
officer of Multi-Tech Systems, Inc. All rights reserved. Copyright © 2020
by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranties,
whether express, implied or by estoppels, with respect to the content,
information, material and recommendations herein and specifically
disclaims any implied warranties of merchantability, fitness for any
particular purpose and non-infringement. Multi-Tech Systems, Inc.
reserves the right to revise this publication without obligation to notify any
person or organization of such revisions or changes.
MultiConnect, MultiTech and the MultiTech logo are registered
trademarks of Multi-Tech Systems, Inc. All other brand and product
names are trademarks or registered trademarks of their respective
companies.
MultiConnect®microCell Cellular Modem MultiTech Systems MultiConnect®microCell Cellular Modem MultiTech Systems MultiConnect®microCell Cellular Modem MultiTech Systems
Quick Start Quick Start Quick Start
Overview
The MultiConnect microCell (MTCM2) is a compact communications
device that provides network capabilities for fixed and mobile
applications.
Package Contents
Your package includes the following (varies with model):
Device 1- MultiConnect microCell modem
Antennas 2 - External antennas
Documents 1 - Quick Start, 1 - Warranty information
Documentation
To download documentation, go to
https://www.multitech.com/brands/multiconnect-microcell, select your
model and click Manuals for device specific documentation.
Document Description
MultiConnect microCell
User Guide
Hardware, regulatory, and getting
started information.
MultiConnect microCell
Quick Start
This document. Steps for getting
started. Check online for an update
version.
AT Commands Reference
Manual
Lists AT Commands and parameters
used to communicate with your device.
Side Panels
Connectors
The device has the following connectors:
■USB 1 USB connector,
■SMA 2 female SMA connectors, labeled CELL and AUX
■SIM 1 micro-SIM slot, between the SMA connectors
LEDs
Note:
■For additional LED information, refer to the User Guide for
your model.
■Slow is 1 second, on 1 second off.
■Fast is 200 milliseconds, on 200 milliseconds off.
LED Status Description
Power On Device has power
Off Device does not have power
Link Status
(LS)
On Radio is not registered
Flash Slow Registered
Off Radio is turned off, in PSM mode,
receiving a firmware update, or SIM is not
inserted.
LTE On LTE
Flash Fast L4G1 only 3G
Flash Slow L4G1 only 2G
Off SIM not inserted or radio technology
unknown
SIM On Ready
Flash Slow Other
Off SIM not inserted
LED Status Description
Signal
Strength
On Good
Flash Fast Fair
Flash Slow Poor
Off Too low for communication or SIM not
inserted.
Dimensions
With antennas attached, the dimensions are as follows. Refer to the user
guide for more detailed dimensions.
Questo manuale è adatto per i seguenti modelli
2
Altri manuali Multitech Modem
Multitech
Multitech MultiModem MT5634ZBA-V-V92 Manuale utente
Multitech
Multitech MTC-C2 Manuale utente
Multitech
Multitech MTCBA-C-U-N1 Manuale utente
Multitech
Multitech MTCBA-E Manuale utente
Multitech
Multitech Multimodem MTCBA-G-F2 Manuale utente
Multitech
Multitech MultiModem ZBA MT9234ZBA Manuale utente
Multitech
Multitech MT56DSU-S Manuale utente
Multitech
Multitech MTCBA-C-EN-N1 Manuale utente
Multitech
Multitech MT2834MR Manuale tecnico
Multitech
Multitech MTD-H5 Manuale utente
Multitech
Multitech MultiModem MT5656ZDX-Series Manuale utente
Multitech
Multitech MT5634MU Manuale utente
Multitech
Multitech MultiModem ZBA MT9234ZBA Manuale utente
Multitech
Multitech MT9234ZBAUSBCDC Manuale utente
Multitech
Multitech Dragonfly MTQ-L4G1 Manuale utente
Multitech
Multitech MT5600BA Manuale utente
Multitech
Multitech MultiModem DID MT5634ZBA-DID Manuale utente
Multitech
Multitech MMCModem MTMMC-G-F4 Manuale utente
Multitech
Multitech MTC-MAT1-B01 Manuale utente
Multitech
Multitech SocketModem Guida all'applicazione
