Murrelektronik CUBE20S Manuale utente
Manual CUBE20S PROFINET IO
Art.-No. 57106 Bus node incl. power module
© Murrelektronik GmbH
Murrelektronik GmbH
Falkenstraße 3
71570 Oppenweiler
GERMANY
Phone +49 7191 47-0
Fax +49 7191 47-491000
NOTE
Translation of the original instructions
This document is valid for the following products:
Document status:
Material short text Art.-No.
Cube20S PROFINET IO Busknoten 57106
Manual number 57106
Language EN
Version 13
Date 2020-03
Manual CUBE20S PROFINET IO
Art.-No. 57106 Bus node incl. power module
3 / 94
Table of Contents
1 Introduction 6
1.1 Service and support 6
1.2 Introduction / about this document 7
1.3 Symbols 7
1.4 Trademarks 8
2 For your own safety 9
2.1 Target group 9
2.2 Intended purpose 9
2.3 General safety instructions 9
2.4 Notes on electrostatically sensitive equipment 10
2.5 EMC installation guidelines 11
2.6 Notes on spare parts and accessories 11
2.7 Environmentally friendly disposal 12
2.8 EC Declaration of Conformity 12
2.9 Warranty and liability 12
3 System description 13
3.1 Hardware revision 17
4 General data 18
5 Technical Data 20
6 Mounting 22
6.1 Dimensions 22
6.2 General notes 23
6.2.1 Functional principle of the locking 24
6.3 Installing the DIN rail 25
6.4 Mounting of the bus node 26
6.5 Installing the expansion modules 27
6.6 Replacing an electronic module 28
6.7 Installing the bus cover 29
6.8 Installing the shield bus carrier 30
7 Disassembling and replacing modules 31
7.1 Procedure 31
7.2 Replacing the bus node 32
7.3 Replacing an expansion module 33
7.4 Replacing an electronic module 35
7.5 Replacing a module group 36
8 Installation 38
8.1 General notes 38
Manual CUBE20S PROFINET IO
Art.-No. 57106 Bus node incl. power module
4 / 94
8.2 Spring terminals 38
8.2.1 Procedure 40
8.3 Wiring of the bus node 41
8.4 Wiring of the expansion modules 42
8.5 Wiring of the power modules 42
8.6 Fixing the shield 44
8.7 Fuse protection 45
8.7.1 Power modules 45
8.7.2 System 45
8.7.3 Fuse-protection with MICO circuit breakers 46
8.8 Using power modules 47
8.8.1 Power module art. no. 57130 47
8.8.2 Power module art. no. 57131 47
9 Troubleshooting 49
10 Art.-No. 57106 PROFINET IO bus node 50
10.1 Features 50
10.2 Structure 51
10.3 Interfaces 51
10.3.1 Address switch 52
10.4 LED status indication 54
11 PROFINET IO 57
11.1 Basics 57
11.2 PROFINET installation guidelines 60
11.3 System access 62
11.3.1 Overview 62
11.3.2 Access to the I/O range 63
11.3.3 Access to parameter data 63
11.3.4 Access to diagnostic data 64
11.4 Planning 65
11.5 Web server 71
11.5.1 Access via IP address 71
11.5.2 Structure of the web server 71
11.5.3 Web page with selected PROFINET IO device 71
11.5.4 Website if a module is selected 72
11.6 FMM - Free Module Mapping 73
11.6.1 Overview 73
11.6.2 Configuration 73
11.6.3 Data record 0x7F 74
11.6.4 Start-up 74
11.6.5 Configuration examples 75
11.6.5.1 Nominal configuration 75
11.6.5.2 Hardware variants 75
11.7 Diagnosis and interrupt 79
11.7.1 Process interrupt 79
Manual CUBE20S PROFINET IO
Art.-No. 57106 Bus node incl. power module
5 / 94
11.7.2 Diagnostic interrupt 80
11.8 Access to diagnostic data 83
11.8.1 Acyclic Access 83
11.8.2 Diagnostic data of PROFINET IO device 83
11.8.3 Diagnostic data modules 84
11.9 I&M data 86
11.10 Index overview 88
12 Appendix 90
12.1 Accessories 90
12.2 Glossary 91
12.3 Legal notes 92
Introduction
User manual 57106_hdb_en_13 6 / 94
1 Introduction
1.1 Service and support
Service and support
Sales Our sales staff in-house and in the field, and our technicians will support you
at all times.
Sales support Our sales support will assist you:
with consultation during the development phase of your application,
with extensive system design across all product groups,
with visits from traveling sales representatives,
with a system analysis.
For any further questions, please do not hesitate to contact our sales repre-
sentatives!
Application support Our application support will assist you:
with product-related questions during commissioning,
with product-related and customer-specific software components support-
ing your application, such as diagnostics.
For any further questions, please do not hesitate to contact our sales repre-
sentatives!
Customer Service Cen-
ter (CSC)
Our staff of the Customer Service Center will help you with all questions con-
cerning installation and start-up. They support you, for example, if you have
problems with combining hardware and software products from different man-
ufacturers.
A number of support tools and measurement facilities are available for field
bus systems and EMC interference.
Call us on +49 7191 47-2050 or send us an
e-mail to: support@murrelektronik.com
Service addresses Murrelektronik GmbH has a policy of customer proximity, both at the national
and international level. Please visit our website to find your contact person:
www.murrelektronik.com
Introduction
User manual 57106_hdb_en_13 7 / 94
1.2 Introduction / about this document
Purpose of this
document
This document describes the use of the
Cube20S PROFINET IO bus node
module from the CUBE20S system by Murrelektronik GmbH. It describes the
design, engineering and application.
NOTE
Translation of the original manual.
1.3 Symbols
This document includes information and notes that have to be observed for
your own safety and to avoid injuries and material damage. They are marked
as follows:
DANGER!
Immediate danger
Failure to observe this warning involves an imminent risk of death or seri-
ous injuries.
WARNING!
Possible danger
Failure to observe this warning can lead to death or serious injuries.
CAUTION!
Low-risk danger
Failure to observe this warning can lead to mild to moderate injuries.
NOTICE
Possible material damage
Failure to observe the warning may cause damage to the device and/or
the system.
NOTE
Other technical information and notes of Murrelektronik GmbH.
RECOMMENDATION
Notes with this symbol are recommendations of Murrelektronik GmbH.
PRODUCTS AND ACCESSORIES
This symbol indicates accessories or product recommendations.
Instruction for use An arrow marks instructions.
Read and observe the instructions.
Introduction
User manual 57106_hdb_en_13 8 / 94
1 | If they are numbered, it is absolutely necessary to follow them in the cor-
rect order.
2 | Read and observe the instructions.
Hexadecimal numbers Hexadecimal numbers are written in the 0x format usually used by program-
mers, e.g. : 0x15AE = 15AEh
1.4 Trademarks
Trademarks of the following companies and institutions are used in this docu-
mentation:
PROFINET/PROFINET IO PROFIBUS Nutzerorganisation e.V. (PNO)
PRONETA Siemens AG
S7-300 Siemens AG
S7-400 Siemens AG
S7-1500 Siemens AG
SIMATIC Siemens AG
STEP Siemens AG
TIA Portal Siemens AG
For your own safety
User manual 57106_hdb_en_13 9 / 94
2 For your own safety
2.1 Target group
Users This manual is intended for users who have knowledge of automation sys-
tems.
Documentation Please give this manual to all employees involved in the following tasks:
Planning
Installation
Set-up
Operation
2.2 Intended purpose
Designated use The Cube20S system has been designed and manufactured for:
communication and process control
general control and automation tasks
industrial use
operation under the ambient conditions specified under technical data
installation in a switch cabinet
Foreseeable misuse The device is not approved for being used:
in potentially explosive atmospheres (EX Zone)
outside of switch cabinets.
2.3 General safety instructions
Please note:
the relevant safety and accident prevention regulations;
the EC Directives or other national regulations;
generally recognized safety rules;
the section 2.5 "EMC installation guidelines".
NOTICE
Defective device!
Improper use of hardware and software can cause damage to the device.
Only qualified personnel of Murrelektronik GmbH may manipulate the de-
vice.
Use the device only to the extent described in the manual.
Avoid accidents caused by electrical voltage!
Comply with the 5 safety rules of electrical engineering!
Disconnect the device from the mains.
Then carry out installation or repair work.
Avoid personal injury and material damage due to malfunctions!
Provide external circuit breakers.
The device may only be operated within the specified tolerances.
For your own safety
User manual 57106_hdb_en_13 10 / 94
Avoid undefined states!
Select and install connection lines so that capacitive and inductive inter-
ferences do not have adverse effects on the system.
Protect the device against improper and unintended use.
2.4 Notes on electrostatically sensitive equipment
NOTICE
Electrostatic sensitive product
The assemblies might get damaged.
Ensure sufficient grounding of persons and working material!
Handling
Murrelektronik assemblies include highly integrated MOS com-
ponents. These components are extremely sensitive to over-
voltage occurring, for example, due to electrostatic discharge.
Assemblies at risk are marked with the adjacent symbol.
The symbol is affixed to assemblies, sub-racks or packaging
and indicates electrostatically sensitive equipment. These as-
semblies may become irreparably damaged by voltage and energy levels
which are far below the perception levels of human beings.
If a person who is not electrostatically discharged handles electrostatically
sensitive equipment, voltages may be produced. They may damage compo-
nents, impair the functioning of assemblies or render assemblies inoperative.
Frequently, assemblies thus damaged cannot directly be recognized as faulty.
The fault may only show up after prolonged operation.
Components damaged by electrostatic discharge may produce temporary
faults in case of temperature changes, vibrations or load changes.
Only with a consistent use of protective devices and a responsible compliance
of the instructions for use can you avoid malfunctions or failures of the elec-
trostatically sensitive equipment.
Shipping For shipping electrostatically sensitive equipment, use always the original
packaging.
Measurements Observe the following notes for measurements on electrostatically sensitive
equipment:
Discharge potential-free measuring instrument briefly
Ground the measuring instruments used
Altri manuali per CUBE20S
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Murrelektronik Unità di controllo
Murrelektronik
Murrelektronik MVK-MP Manuale utente
Murrelektronik
Murrelektronik IMPACT67-P Manuale utente
Murrelektronik
Murrelektronik IMPACT67 Series Manuale utente
Murrelektronik
Murrelektronik Data Panel xtreme DB DP-34044-2 Manuale utente
Murrelektronik
Murrelektronik MVK-MPNIO Series Manuale utente
Murrelektronik
Murrelektronik Cube67 Series Manuale utente
Murrelektronik
Murrelektronik Data Panel xtreme DB DP-34044-1 Manuale utente
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
