NanoCam Plus NCP-DVR100 Manuale utente
Full HD Dash Camera
with WiFi & Supercapacitor
NCP-DVR100
USER MANUAL
Your Safety. Our Priority
1
CONTENTS
1.0 CAUTION ................................................................................................................................ 2
2.0 INTRODUCTION...................................................................................................................... 2
3.0 MICRO SD CARD WARNING .................................................................................................... 3
3.1 Formatting the inserted Micro SD Card ............................................................................. 3
4.0 PACKAGE CONTENTS............................................................................................................. 4
5.0 PRODUCT OVERVIEW ............................................................................................................. 4
6.0 INSTALLATION INSTRUCTIONS ............................................................................................. 5
7.0 SOUND ALERTS...................................................................................................................... 6
8.0 KEY FUNCTIONS .................................................................................................................... 7
9.0 DOWNLOADING AND INSTALLING THE NCP-DVR100 APP..................................................... 8
10.0 NCP-DVR100 APP OPERATION..............................................................................................10
11.0 SETTINGS .............................................................................................................................11
12.0 PLAYBACK , DELTE AND DOWNLOAD THE FILES FROM THE DASH CAMERA TO PHONE ......12
12.1 App Video Playback........................................................................................................... 13
12.2 Downloading videos from the App.................................................................................... 13
12.3 Sharing videos on Social Media........................................................................................ 13
12.4 NCP-DVR100 App Settings ............................................................................................... 14
13.0 PRODUCT SPECIFICATIONS ..................................................................................................16
14.0 WARRANTY TERMS & CONDITIONS ......................................................................................17
2
1.0 CAUTION
• Ensure you are using your dash camera within your countries’ road laws. Please make
sure you are familiar with your local road legislation before use.
• Please set the time and date before you start using this device to record.
• The notifications given by the dash camera are suggestions only, please always remain
alert and aware of the actual road conditions.
• The system is to be used for non-commercial use only, within the limits permitted by
relevant laws.
• Avoid using the dash camera in the vicinity of any devices that emit radio interference (eg.
microwave ovens).
• It is considered normal for the dash camera to get warm while using it.
IT IS HIGHLY RECOMMENDED THAT YOU FORMAT BOTH USED OR NEW MICRO SD CARDS
BEFORE USE.
2.0 INTRODUCTION
This product and its safety features will help improve your driving experience. However, like
most after-market safety enhanced devices, they are designed to assist and aid the driver.
They are not designed to replace the skill, ability, and awareness of the person operating the
vehicle.
Please read through these instructions before attempting to install this product.
For the latest manual and product updates, please visit our website at
www.nanocamplus.com.au or www.nanocamplus.co.nz
3
3.0 MICRO SD CARD WARNING
This dash camera can only be used with Micro SD Cards, Class 10 or above with 32GB - 128
GB storage capacity. Please format your Micro SD card before use.*
NOTE:
• Formatting the Micro SD card will permanently remove the data on the inserted Miro SD
card and prepare it for use with the dash camera.
*Micro SD cards are not included and will need to be purchased separately.
3.1 FORMATTING THE INSERTED MICRO SD CARD
Please download the NCP-DVR100 App and connect your dash camera with the downloaded
App by following the steps as outlined on page 8.
Please select SETTINGS and press FORMAT SD CARD.
The dash camera will format the Micro SD card and will communicate via the unit's audio
commands that the Micro SD card has been formatted.
NOTES ON INSTALLATION
1. It is advisable to install the dash camera near the rearview mirror, at the top centre of
the windshield.
2. Place the lens within the windscreen wiper range to ensure it has a clear recording view
when it rains.
3. Do not touch the lens with your fingers. Fingerprints left on the lens will result in
unclear videos or photos. If photos or videos are blurred, please clean the lens gently
with a microfibre cloth.
4. Only use the included charging cable to power the dash camera.
4
4.0 PACKAGE CONTENTS
NCP-DVR100
Dash Cam x1
12/24V Power
Adaptor x1 User Guide x1
3M
Adhesive x1
Electrostatic
Film x1
5.0 PRODUCT OVERVIEW
CAMERA
1. Adhesive sticker
2. Speaker vent
3. Camera lens
4. Recording indicator LED
5. Power connected LED
6. WIFI connected LED
7. Mini USB connector (for power)
8. Microphone
9. WIFI On/Off
10. Power & Recording On/Off
11. Microphone On/Off
12. Micro SD Card slot
12
1
32
6
54
9
11
10
8
7
5
6.0 INSTALLATION INSTRUCTIONS
1. OPTIONAL: Select the electrostatic film from the box and adhere it to the front windshield
in the recommended position (as shown below). Please wipe the glass before adhering it
and push out the bubbles between the static film and the glass before installation.
2. Remove the protective film from the adhesive sticker of the NCP-DVR100 and position the
dash camera in the middle of the (optional) electrostatic film. Press down on the base of
the bracket with your hand for 30 seconds to ensure that the sticker adhesive is attached
to the electrostatic film. Adjust the camera by rotating the barrel until the entire road (in
front of the car) is in the camera frame.
3. Run the NCP-DVR100 cable along the top of the front
windshield through the A pillar and around and under
the storage compartment of the passenger side of
your vehicle to the 12/24v adaptor port. Connect the
12/24v adaptor to the car power.
NOTE:
• The electrostatic film will help you easily remove the dash camera from the windshield.
This film is included in the package contents.
6
7.0 SOUND ALERTS
The NCP-DVR100 will communicate commands and updates to the driver via pre-recorded
voice alerts. This information will keep you updated on the status of your dash camera. Audio
notifications will come through the in-built speaker of the NCP-DVR100 and are specified
below.
• Take a picture
• Your Micro SD card is damaged, please
replace
• Format complete
• Format failed
• Your Micro SD card is full, please
replace or reformat
• Please connect your smartphone to
format the Micro SD card
• Please connect your smartphone to
synchronise time
• Please insert your Micro SD card
• The video is now locked
• Recording is now off
• Recording is now on
• Battery will shut down once fully
charged
• Power is disconnected and this device
will now shut down
• Start recording
• Recording has stopped
• Please replace the MicroSD card
• Timelapse video
• Warning tone
• Voice control is now off
• Voice control is now on
• WIFI is connected
• WIFI is disconnected
• WIFI is off
• WIFI is now turned on
7
8.0 KEY FUNCTIONS
OPERATION FUNCTION
Recording indicator The indicator light will flash BLUE whilst recording.
WIFI indicator light The indicator light will flash GREEN when connected to WIFI.
Charging indicator light A Red light will be constant when charging. The Red light will
turn off once charging is complete.
Down button Short press to take a photo, hold for 3 seconds to turn on/off
WIFI.
Power button Power on/off : Hold down for 3 seconds to power on /off.
Reset: Hold down for 8~10 seconds to reset the device and
again for 3 seconds to power on.
Recording: Quicly press to start/stop recording once power
is on.
Up Button Quickly press to turn sound on or off.
NOTE:
• This device features a supercapacitor instead of a Li-ion battery to enhance the
safety of the product. It requires a constant power supply to work, and it is always
recommended to keep it connected to the car charger.
8
9.0 DOWNLOADING AND INSTALLING THE NCP-DVR100 APP
To take advantage of all the functions of the NCP-DVR100 you will need to connect it via WiFi
with the NCP-DVR100 App on your smartphone. Your smartphone (via the App) can also
function as a screen where you can monitor and review driving footage.
All major settings on the NCP-DVR100 are edited through the NCP-DVR100 App. The system
requirements for your smartphone are below:
iPhone: iPhone 5 or later using iOS 10.0 and above.
Samsung Galaxy: S3 and later using Android 6.0 and above.
For you to correctly connect your smart device to your NCP-DVR100 you will need to download
and install the NCP-DVR100 App from the App store. Alternatively you can scan the QR code at
the bottom of this page to download it. You will need to connect your smartphone to the NCP-
DVR100’s WiFi signal using your smartphone's WiFi settings.
For Android devices
Please search NCP-DVR100 in Google Play Store for installation.
For iOS devices
Please search NCP-DVR100 in the iOS App Store for installation.
Or scan the below QR code:
Indice
Altri manuali NanoCam Plus Telecamera da cruscotto
NanoCam Plus
NanoCam Plus NCP-DVRHD2 Manuale utente
NanoCam Plus
NanoCam Plus NCP-DVRT1 Manuale utente
NanoCam Plus
NanoCam Plus NCP-DVRWIFI Manuale utente
NanoCam Plus
NanoCam Plus NCP-DVR2K Manuale utente
NanoCam Plus
NanoCam Plus NCP-DVR4K Manuale utente
NanoCam Plus
NanoCam Plus NCP-DVR720 Manuale utente
NanoCam Plus
NanoCam Plus NCP-BDVR1 Manuale utente
NanoCam Plus
NanoCam Plus NCP-DVR1080 Manuale utente
NanoCam Plus
NanoCam Plus NCP-DVR1080P Manuale utente
NanoCam Plus
NanoCam Plus NCP-DVR2K Manuale utente
