Nanotron Technologies NanoLOC AVR Module Manuale utente

FCC Required Exhibit 12

nanoLOC AVR Module

User Manual (UserMan)

Version 1.0

NA-08-0195-0051-1.00

Document Information

nanoLOC AVR Module User Manual (UserMan)

Document Information

Document Title: nanoLOC AVR Module User Manual (UserMan)

Document Version: 1.0

Published (yyyy-mm-dd): TBD

Current Printing: 2008-5-21, 12:02 pm

Document ID: NA-08-0195-0051-1.00

Document Status: Draft

Disclaimer

Nanotron Technologies GmbH believes the information contained herein is correct and accurate at the time of release. Nanotron

Technologies GmbH reserves the right to make changes without further notice to the product to improve reliability, function or

design. Nanotron Technologies GmbH does not assume any liability or responsibility arising out of this product, as well as any

application or circuits described herein, neither does it convey any license under its patent rights.

As far as possible, significant changes to product specifications and functionality will be provided in product specific Errata

sheets, or in new versions of this document. Customers are encouraged to check the Nanotron website for the most recent

updates on products.

Trademarks

nanoNET©is a registered trademark of Nanotron Technologies GmbH. All other trademarks, registered trademarks, and product

names are the sole property of their respective owners.

This document and the information contained herein is the subject of copyright and intellectual property rights under international

form by any means, electronic, mechanical or optical, in whole or in part, without the prior written permission of Nanotron

Technologies GmbH.

Life Support Policy

These products are not designed for use in life support appliances,

devices, or systems where malfunction of these products can reason-

ably be expected to result in personal injury. Nanotron Technologies

GmbH customers using or selling these products for use in such applica-

tions do so at their own risk and agree to fully indemnify Nanotron Tech-

nologies GmbH for any damages resulting from such improper use or

sale.

Electromagnetic Interference / Compatibility

Nearly every electronic device is susceptible to electromagnetic interfer-

ence (EMI) if inadequately shielded, designed, or otherwise configured

for electromagnetic compatibility.

To avoid electromagnetic interference and/or compatibility conflicts, do

not use this device in any facility where posted notices instruct you to do

so. In aircraft, use of any radio frequency devices must be in accordance

with applicable regulations. Hospitals or health care facilities may be

using equipment that is sensitive to external RF energy.

With medical devices, maintain a minimum separation of 15 cm (6

inches) between pacemakers and wireless devices and some wireless

radios may interfere with some hearing aids. If other personal medical

devices are being used in the vicinity of wireless devices, ensure that the

device has been adequately shielded from RF energy. In a domestic

environment this product may cause radio interference in which case the

user may be required to take adequate measures.

CAUTION! Electrostatic Sensitive Device. Pre-

caution should be used when handling the

device in order to prevent permanent damage.

FCC User Information

Statement according to FCC part 15.19:

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful inter-

ference, and (2) this device must accept any interference received, includ-

ing interference that may cause undesired operation.

Statement according to FCC part 15.21:

Modifications not expressly approved by this company could void the

user's authority to operate the equipment.

RF exposure mobil:

If using a permanently affixed label, the modular transmitter must be

labeled with its own FCC identification number, and, if the FCC identifica-

tion number is not visible when the module is installed inside another

device, then the outside of the device into which the module is installed

must also display a label referring to the enclosed module. This exterior

label can use wording such as the following: “Contains Transmitter Module

FCC ID: SIFNANOLOCAVR0108” or “Contains FCC ID:

SIFNANOLOCAVR0108.” Any similar wording that expresses the same

meaning may be used.

Statement according to FCC part 15.105:

This equipment has been tested and found to comply with the limits for a

Class A and Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation and against harmful interference

when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions as pro-

vided in the user manual, may cause harmful interference to radio commu-

nications. However, there is no guarantee that interference will not occur in

a particular installation. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required

to correct the interference at his or her own expense.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

connected.

• Consult the dealer or an experienced technician for help.

Table of Contents

nanoLOC AVR Module User Manual (UserMan)

Table of Contents

List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

List of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.2 Key Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3.1 General / DC Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3.2 RF Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

4 Module Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4.1 Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4.2 Pin Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4.3 Pin Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4.4 Pins for SPI Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4.5 Pins for JTAG Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5 Soldering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5.1 Recommended Temperature Profile for Lead Free Reflow Soldering . . . . . . . . . . . . . . . . . . . . . . 8

5.2 Recommended Foot Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

6 Schematics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7 PCB Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

8 Bill of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

9 Ordering Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

About Nanotron Technologies GmbH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Table of Contents

nanoLOC AVR Module User Manual (UserMan)

List of Figures

Figure 1: nanoLOC AVR Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Figure 2: nanoLOC AVR Module - components side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Figure 3: nanoLOC AVR Module - pad side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Figure 4: nanoLOC AVR Module - measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Figure 5: nanoLOC AVR Module – measures SPI pads (top side) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Figure 6: Pin layout - top view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Figure 7: Pin layout - bottom view (inverted) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Figure 8: Recommended soldering temperature profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Figure 9: nanoLOC AVR Module – recommended foot pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Figure 10: nanoLOC AVR Module – schematics 1 of 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Figure 11: nanoLOC AVR Module – schematics 2 of 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Figure 12: nanoLOC AVR Module – schematics 3 of 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Figure 13: nanoLOC AVR Module – top side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Figure 14: nanoLOC AVR Module – bottom side (inverted) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Figure 15: nanoLOC AVR Module – components top side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

List of Tables

Table 1: Key components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Table 2: Absolute maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Table 3: General / DC-Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Table 4: RF parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Table 5: Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Table 6: Pins for SPI programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Table 7: Pins for JTAG programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Table 8: nanoLOC AVR Module – bill of materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Table 9: nanoLOC AVR Module ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Overview

nanoLOC AVR Module User Manual (UserMan)

1 Overview

This smart nanoLOC AVR Module is only 35 mm by 14 mm and less than 3 mm thick. Yet it inte-

grates all the required components for a complete RF module based on Nanotron’s innovative

nanoLOC TRX Transceiver. As well as the nanoLOC chip, this module includes the Atmel AVR

ATmega644V microcontroller, a band pass filter, a balun, and an integrated 2.4 GHz chip antenna.

Figure 1: nanoLOC AVR Module

Figure 2: nanoLOC AVR Module - components side

Figure 3: nanoLOC AVR Module - pad side

1.1 Certification

The nanoLOC AVR Module has been certified for use in Europe (R&TTE), Japan (ARIB-T66), and

the United States (FCC).

36 module pins:

16 digital IOs, 2

analog inputs,

PWM, µc reset,

USART, antenna

and TX/RX

Crystals Balun

Band pass

Filter

AntennananoLOC chipMicrocontrollerPin 1

Pin 36

JTAG pins

SPI pins

Pin 1

Pin 36

Scale 3:1

35.05 mm

13.97 mm

Overview

nanoLOC AVR Module User Manual (UserMan)

1.2 Key Components

Table 1: Key components

Component Description

nanoLOC TRX

Transceiver

nanoLOC supports a freely adjustable center frequency with 3 non-overlapping fre-

quency channels within the 2.4 GHz ISM band. This provides support for multiple

physically independent networks and improved coexistence performance with existing

2.4 GHz wireless technologies. Data rates are selectable from 2 Mbps to 125 kbps.

Due to the chip’s unique chirp pulse, adjustment of the antenna is not critical. This sig-

nificantly simplifies the system’s installation and maintenance (“pick and place”).

A sophisticated MAC controller with CSMA/CA and TDMA support is included, as is

Forward Error Correction (FEC) and 128 bit hardware encryption. To minimize soft-

ware and microcontroller requirements, nanoLOC also provides scrambling, automatic

address matching, and packet retransmission.

Integrated into the nanoLOC TRX Transceiver is the DDDL, a Digital Dispersive Delay

Line which is responsible for distinguishing between two possible incoming signals that

are generated by another nanoLOC chip. This received signal is either an Upchirp, a

Downchirp, or a folded pulse (an Upchirp and a Downchirp at the same time). All of

these signals have the same center frequency and the same bandwidth. The differ-

ence between an Upchirp and a Downchirp occurs only in the phase information of the

complex spectrum. This phase information is enough for the DDDL to compress a

pulse at one output port and expand it at the other (that is, to extend the incoming sig-

nal to the doubled duration). In this way the DDDL acts like a matched filter for one of

the possible transmitted pulses.

For more details see nanoLOC TRX Transceiver (NA5TR1) Datasheet available from

Nanotron.

Atmel AVR

ATmega644V

microcontroller

This is a low power CMOS 8-bit microcontroller based on the AVR enhanced RISC

architecture with 64 Kb Flash, 4 Kb SRAM, and 2 Kb EEPROM. This microcontroller

drives the nanoLOC chip via the SPI interface and operates between 1.8 V and 5.5 V.

For more details, refer to the Atmel ATmega644V Datasheet available from Atmel.

Matching circuits

(Balun)

At the RF interface of the nanoLOC chip, a differential impedance of 200 Ωexists

which is matched to the asymmetrical 50 Ωimpedance of the antenna port by a 200 /

50 RF balun. Additional external components at the RF interface have a power and

noise matching function that allows a sharing of the antenna without an external RX/

TX – RF switch.

Integrated 2.4 GHz

chip antenna

As well as this integrated antenna, an external 2.4 GHz antenna can also be con-

nected to the module.

ISM band pass

filter

For an improved robustness against out of band inferences, an ISM band pass filter is

connected at the antenna port.

32.768 kHz,

16 MHz, and

32 MHz quartz

crystals

The 32.768 kHz Quartz is used for the Real Time Clock oscillator. The 16 MHz Quartz

is used by the ATmega microcontroller, while the 32 MHz Quartz works with the inter-

nal oscillator circuitry of the nanoLOC chip.

Connectors

The nanoLOC AVR Module is programmable over JTAG or SPI interfaces. 36 periph-

eral module pins in total are provided, with 16 programmable digital IOs and 2 analog

inputs. The module also provides a pulse-width modulation (PWM) output, a microcon-

troller reset input, a Universal Synchronous RX/TX (USART) input/output, and a TX/

RX signal that enables an external PA.

Absolute Maximum Ratings

nanoLOC AVR Module User Manual (UserMan)

2 Absolute Maximum Ratings

Note: It is critical that the ratings provided in Absolute Maximum Ratings be carefully observed.

Stress exceeding one or more of these limiting values may cause permanent damage to the

device.

Table 2: Absolute maximum rating

Parameter Value Unit

Min. operating temperature -40 °C

Max. operating temperature +85 °C

Max. supply voltage (VCC) 2.7 V

Max. DC current per I/O pin 40 mA

Voltage on /RESET with respect

to GND -0.5 to 13.0 V

Electrical Characteristics

nanoLOC AVR Module User Manual (UserMan)

3 Electrical Characteristics

3.1 General / DC Parameters

3.2 RF Parameters

Table 3: General / DC-Parameters

Symbol Parameter Condition Min. Typ. Max. Units

Top Operating

temperature –-40 –+85 °C

Vcc Supply voltage

fcpu does not exceed rec-

ommended value at given

supply voltage1

1. The ATmega644V microcontroller specifies a maximum CPU clock frequency against supply for

safe voltage operation. For more information, see Atmel ATmega644V Microcontroller Datasheet

(2593L–AVR–02/07) on page 318.

2.3 –2.7 V

Icc Supply current no external connections

besides power supply – – 100 mA

VIL Input low voltage VCC = 2.3V - 2.4V

VCC = 2.4V - 2.7V

-0.5

-0.5 –0.2Vcc

0.3Vcc V

VIH Input high voltage VCC = 2.3V - 2.4V

VCC = 2.4V - 2.7V

0.7Vcc

0.6Vcc –Vcc+0.5

Vcc+0.5 V

Table 4: RF parameters

Symbol Parameter Condition Min. Typ. Max. Units

Zant Line impedance of antenna sig-

nal ANT – – 50 –Ω

Rdata Data rate –125 –2000 kb/s

Psens Receiver sensitivity – – – -971

1. The displayed value is the minimum receive signal power required for BER = 10e-3, which is

equivalent to the maximum receiver sensitivity.

dBm

Ptx Transmit power –-33 – 0 dBm

Module Layout

nanoLOC AVR Module User Manual (UserMan)

4 Module Layout

4.1 Measures

Figure 4: nanoLOC AVR Module - measures

Figure 5: nanoLOC AVR Module – measures SPI pads (top side)

4.2 Pin Layout

Figure 6: Pin layout - top view

Figure 7: Pin layout - bottom view (inverted)

Unit = mm

Scale 3:1

1.1

35.05

13.97

3.81

10.29

2.03

2.79

2.92

14.61

15.62

Unit = mm

Scale 3:1

1516171819202122232425262728

12345678910 1112

SPI4

SPI3 SPI2

SPI1

12345678910 1112

1516171819202122232425262728

J10

J5J11

J12

J3 J7 SPI Pins

JTAG Pins

Module Layout

nanoLOC AVR Module User Manual (UserMan)

4.3 Pin Description

Table 5: Pin description

Pin Signal Description Direction

1DIGIO1 Digital general purpose microcontroller port input/output

2DIGIO2 Digital general purpose microcontroller port input/output

3DIGIO3 Digital general purpose microcontroller port input/output

4DIGIO4 Digital general purpose microcontroller port input/output

5GND Ground connection –

6DIGIO5 Digital general purpose microcontroller port input/output

7DIGIO6 Digital general purpose microcontroller port input/output

8DIGIO7 Digital general purpose microcontroller port input/output

9DIGIO8 Digital general purpose microcontroller port input/output

10 GND Ground connection –

11 GND Ground connection –

12 GND Ground connection –

13 GND Ground connection –

14 GND Ground connection –

15 ANT Antenna signal (output) input/output

16 GND Ground connection –

17 GND Ground connection –

18 TX_RX Control signal for external PA output

19 /RESET Reset-Signal for microcontroller input

20 DIGIO9 Digital general purpose microcontroller port input/output

21 DIGIO10 Digital general purpose microcontroller port input/output

22 DIGIO11 Digital general purpose microcontroller port input/output

23 DIGIO12 Digital general purpose microcontroller port input/output

24 GND Ground connection input/output

25 DIGIO13 Digital general purpose microcontroller port input/output

26 DIGIO14 Digital general purpose microcontroller port input/output

27 DIGIO15 Digital general purpose microcontroller port input/output

28 DIGIO16 Digital general purpose microcontroller port input/output

29 GND Ground connection –

30 AIN1 10-bit ADC (Channel 0) input

31 AIN2 10-bit ADC (Channel 1) input

32 PWMOUT PWM signal output

33 VCC Positive supply voltage input

34 RXD UART receive signal input

35 TXD UART transmit signal output

36 GND Ground connection –

Indice

Altri manuali Nanotron Technologies Unità di controllo

Nanotron Technologies

Nanotron Technologies swarm bee LE V2 DK+ Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente

Nanotron Technologies nanoLOC AVR Module Manuale utente

Manuali Unità di controllo popolari di altre marche