Navico BSM-1 Manuale utente
Installation Manual
Navico BSM-1
Broadband Sounder Module
English
www.simrad-yachting.com
www.northstarnav.com.
Brands by Navico - Leader in Marine Electronics
Introduction | 1
EN
Industry Canada
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the device.
CE Declaration of conformity
Hereby, Navico Holding AS declares that this BSM-1 is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Navico Holding AS vakuuttaa täten että BSM-1 tyyppinen
laite on direktiivin 1999/5/EY oleellisten vaatimusten ja
sitä koskevien direktiivin muiden ehtojen mukainen.
Hierbij verklaart Navico Holding AS dat het toestel BSM-
1 in overeenstemming is met de essentiële eisen en de
andere relevante bepalingen van richtlijn 1999/5/EG.
Par la présente, Navico Holding AS déclare que ce BSM-1
est conforme aux exigences essentielles et aux autres
dispositions de la directive 1999/5/CE qui lui sont
applicables.
Härmed intygar Navico Holding AS att denna BSM-1 står
i överensstämmelse med de väsentliga egenskapskrav
och övriga relevanta bestämmelser som framgår av
direktiv 1999/5/EG.
Undertegnede Navico Holding AS erklærer herved, at
følgende udstyr BSM-1 overholder de væsentlige krav og
øvrige relevante krav i direktiv 1999/5/ EF.
Hiermit erklärt Navico Holding AS dass sich dieses BSM-
1 in Übereinstimmung mit den grundlegenden Anforder-
ungen und den anderen relevanten Vorschriften der
Richtlinie 1999/5/EG befindet. (BMWi)
Navico Holding AS -1
Con la presente Navico Holding AS New Zealand dichiara
che questo BSM-1 è conforme ai requisiti essenziali ed
alle altre disposizioni pertinenti stabilite dalla direttiva
1999/5/CE.
Preface
2| Introduction
EN
Por medio de la presente Navico Holding AS declara que
el BSM-1 cumple con los requisitos esenciales y
cualesquiera otras disposiciones aplicables o exigibles de
la Directiva 1999/5/CE.
Navico Holding AS declara que este BSM-1 está
conforme com os requisitos essenciais e outras provisões
da Directiva 1999/5/CE.
The equipment named in this declaration, is intended for use in
international waters as well as coastal sea areas administered
by countries of the E.U. and E.E.A.
Disclaimer
As Navico is continuously improving this product, we retain the
right to make changes to the product at any time which may
not be reflected in this version of the manual. Please contact
your nearest distributor if you require any further assistance.
instrument and tranducer(s) in a manner that will not cause
accidents, personal injury or property damage. The user of this
product is solely responsible for observing safe boating
practices.
NAVICO HOLDING AS. AND ITS SUBSIDIARIES, BRANCHES
AND AFFILIATES DISCLAIM ALL LIABILITY FOR ANY USE OF
THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS,
DAMAGE OR THAT MAY VIOLATE THE LAW.
Governing Language: This statement, any instruction manuals,
user guides and other information relating to the product
(Documentation) may be translated to, or has been translated
from, another language (Translation). In the event of any
conflict between any Translation of the Documentation, the
English language version of the Documentation will be the
official version of the Documentation.
This manual represents the product as at the time of printing.
Navico Holding AS. and its subsidiaries, branches and affiliates
reserve the right to make changes to specifications without
notice.
Copyright © 2009 Navico Holding AS .
Introduction | 3
EN
Warranty
In case of any queries, refer to the brand web site of your
display or system.
www.northstarnav.com
www.simrad-yachting.com
Feedback from you
Your feedback is important and helps Navico ensure that this
manual is a valuable resource for all marine technicians. E-mail
your comments or suggestions about this manual to the
4| Introduction
EN
Contents
1 Introduction ................................................... 5
Parts List ......................................................... 5
2 Installation ..................................................... 7
Mounting location ............................................. 8
Mounting the BSM-1 module .............................. 9
3 Connecting BSM-1 .......................................... 10
Connect the transducer ..................................... 11
Connect BSM-1 to your display........................... 12
Simrad NSE8/NSE12 ......................................... 12
Simrad GB40 / Northstar 8000i .......................... 13
Connect power ................................................. 15
BSM-1 Indicator lights....................................... 17
4 Parts List ........................................................ 18
Ethernet cables RJ45 type ................................. 18
Transducer options ........................................... 18
Optional parts .................................................. 19
Spare parts for service ...................................... 19
5 Drawings ........................................................ 21
6 Specifications ................................................. 22
Introduction | 5
EN
This document explains how to connect the Navico BSM-1
sounder module to a compatible navigation system or display
unit. The BSM-1 connects directly between the transducer and
display unit or with a network switch (Ethernet Linker). Read
the following instructions carefully before attempting any
installation.
The BSM-1 is compatible with the following displays and
systems:
GB40
NSE8/NSE12
8000i
Parts List
Part Number
Description
Item
000-0132-05
BSM-1
Complete
Sounder
003-8072-00
BSM-1 sounder
module
1Introduction
6| Introduction
EN
Part Number
Description
Item
003-8256-00
Installation kit
including:
019-0009-00
Terminal plug
043-0037-00
Fuse BK/ATC-3
089-0431-00
Fuse holder ATC
BLD TYPE IN LINE
083-0011-21
Screw #10 X 3/4
PN HD SS selftap
000-0127-51
1.5 m (5 ft)
Ethernet
extension cable
032-0167-02
Power cable 2 m
(6.5 ft)
988-0170-08
This installation
manual
Installation | 7
EN
The BSM-1 sounder module connects between the transducer
and display unit or via a network switch.
Before installing the BSM-1, consider location and cable runs
necessary to connect the module to the display unit and power
source.
You will need to attach the power cable, Ethernet cable and a
transducer to the BSM-1.
The transducer and Ethernet cables are not included.
Do not run the transducer cabling near the BSM-1 DC
power cables or any VHF antenna coax cables or any VHF
DC power cables.
The BSM-1 conforms to the appropriate Electromagnetic
Compatibility (EMC) standards; but proper installation is
required to get the best use and performance from this product.
2Installation
8| Installation
EN
Mounting location
When installing the module certain factors that could affect its
operation should be considered. Ensure you have as much
separation as possible between different electrical equipment,
(see diagram below).
The BSM-1 conforms to the appropriate Electromagnetic
Compatibility (EMC) standards but proper installation is
required to get the best use and performance from this product.
Indice
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
