NCR 7772-K169 Manuale

Kit Instructions

External Speaker

7772-K169

Issue B

The product described in this document is a licensed product of NCR Corporation.

NCR is a registered trademark of NCR Corporation. Product names mentioned in this publication may be

trademarks or registered trademarks of their respective companies and are hereby acknowledged.

Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is

permitted under the terms and conditions of an agreement you have with NCR, NCR's copyright notice

must be included.

It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software,

and firmware become available. NCR, therefore, reserves the right to change specifications without prior

notice.

All features, functions, and operations described herein may not be marketed by NCR in all parts of the

world. In some instances, photographs are of equipment prototypes. Therefore, before using this document,

consult with your NCR representative or NCR office for information that is applicable and current.

By NCR Corporation

Global Headquarters

864 Spring St NW

Atlanta, GA 30308

U.S.A.

Revision Record

Issue Date Remarks

AJun 2021 First Issue

BDec 2021 Added Warning statement

External Speaker

This kit provides an External Speaker for NCR CX7 All-in-One POS (7772).

Kit Contents

2 External Speaker

Installation Procedure

Warning: Disconnect the AC power cord from the AC outlet and wait 30 seconds

before servicing the terminal.

1. Lay the Display face down on a flat surface.

Note: Always use a soft material (cloth, foam) to protect the display screen when

placing the terminal face down.

2. Remove the Cable Cover.

a. Remove the two (2) screws that secure the Cable Cover to the Back Cover.

b. Rotate and unhook the Cable Cover from the Back Cover.

External Speaker 3

3. Disconnect the Cables.

a. Loosen the thumbscrew of the 180-degree USB-C Cable then disconnect the

Cable.

b. Remove the Ethernet Cable from the Cable Management Hook then disconnect

the Cable.

4. Loosen the two (2) captive screws that secure the Back Cover to the Display.

4 External Speaker

5. Rotate the Back Cover away from the Display and unhook the Back Cover Tabs.

External Speaker 5

6. Insert a flat screw driver in the slot of Port C to unsnap the Plate from the display

housing.

7. Disconnect the Internal Speaker Cable from the Motherboard and remove the

Internal Speaker (2 screws).

6 External Speaker

8. Route the External Speaker Cable through the port opening as shown and connect

the External Speaker Cable to the Extension Cable.

9. Connect the Extension Cable to the Motherboard.

External Speaker 7

10. Hook the External Speaker into the display housing and snap into place.

11. Secure the External Speaker with a screw.

12. Reinstall the Display Back Cover.

13. Reconnect the 180-degree USB-CCable and Ethernet Cable.

14. Reinstall the Cable Cover.

Altri manuali per 7772-K169

Indice

Altri manuali NCR Altoparlanti

NCR

NCR 7772-K169 Manuale

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente