nedis DCAM40BK Manuale utente
ned.is/dcam40bk
Dashboard Camera
For 1440p Wide quad HD car recordings
DCAM40BK
aQuick start guide 5
cKurzanleitung 9
bGuide de démarrage rapide 15
dSnelstartgids 20
jGuida rapida all’avvio 25
hGuía de inicio rápido 30
iGuia de iniciação rápida 35
eSnabbstartsguide 40
gPika-aloitusopas 45
fHurtigguide 50
2Vejledning til hurtig start 54
kGyors beüzemelési útmutató 59
nPrzewodnik Szybki start 64
xΟδηγό γρήγορη εκκίνηση 69
1Rýchly návod 74
lRychlý návod 79
yGhid rapid de iniiere 84
1
i
o
y
t
r
e
w
q
2
3
4
5
7
8
u
6
9p
A
B
5
aQuick start guide
Dashboard Camera DCAM40BK
For more information see the extended manual online:
ned.is/dcam40bk
Intended use
The DCAM40BK is a dashboard camera that can be mounted to the windshield
of your vehicle.
This product is intended to take photos, record videos and playback recordings
and is equipped with a g-sensor and night vision.
Any modification of the product may have consequences for safety, warranty
and proper functioning.
The product is not intended for professional use.
Specications
Product Dashboard Camera
Article number DCAM40BK
Dimensions (l x w x h) 100 x 55 x 43 mm
Input voltage 5 VAC
Input current 1 A
Battery Lithium-ion polymer 3.7 VDC / 200 mAh
Battery capacity 200 mAh
Power consumption 660 – 750 mAh dual camera recording
Storage temperature -10 - 70 °C
Operating temperature -10 - 60 °C
Display 2.31 inch LCD display
Front camera IMX323 Sensor + 650NM camera
Cabin camera IMX323 Sensor + 940NM camera
Viewing angle 140 degrees
Minimum illumination 1 Lux
Video Loop video / motion detecting
6
Video format .mp4
Video encoding H.264
Video resolution 2560 x 1440p / 1920 x 1080p / 1280 x 720p
Image resolution 4032 x 3024 / 3648 x 2736 / 3264 x 2448 /
2592 x 1944 / 2048 x 1536 / 1920 x 1080 /
1280 x 960 / 640 x 480
HDMI output No
Seamless video Yes
Boot automatically video Support
G-sensor Support
Language English, French, German, Italian, Dutch,
Swedish, Finnish, Romanian, Hungarian,
Czech
Video recording time 3 / 5 / 10 min
Recording audio Built-in microphone
The microphone can be switched on/off
Memory card MicroSD card
Memory card capacity 8 - 128 GB
USB interface Mini5Pin USB2.0
Main parts (image A)
Suction fix clip
Suction fix
Micro USB port
MicroSD card slot
Front camera
Speaker
Reset button
Microphone
Auxiliary power plug
Infrared light
Cabin camera
Infrared light
Display
Power button
Menu / mode button
Up button
Down button
OK button
Micro USB cable
7
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in this document
before you install or use the product. Keep this document for future
reference.
• Only use the product as described in this manual.
• Do not use the product if a part is damaged or defective. Replace a damaged
or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance
to reduce the risk of electric shock.
• Disconnect the product from the power source and other equipment if
problems occur.
• Do not expose the product to water or moisture.
• Non-rechargeable batteries are not to be recharged.
• Do not short-circuit a cell or a battery.
• In the event of a cell leaking, do not allow the liquid to come in contact with
the skin or eyes. If contact has been made, wash the affected area with
copious amounts of water and seek medical advice.
• Do not use any charger other than that specifically provided for use with the
equipment.
• Do not cover ventilation openings.
• Be careful when using the product while driving. Always focus your attention
on the road.
• Do not place the product near heat sources, this can damage the product.
• Do not expose the product to very hot or very cold temperatures or drastic
changes in temperature or humidity.
• Do not install the product within the operation range of the airbag.
• Ensure the product and the power cable are installed and do not interfere
with the sight of the driver or impede with the operation of any driving
controls.
8
Installing the product (image B)
Before using the product, the user shall check the applicable laws and
regulations on the use of the product.
In some jurisdictions, the use of this product can be considered as an
invasion of privacy.
The mounting of the product on the windshield might be regulated by
law in some jurisdictions.
It is the user’s own responsibility to consult the local laws and
regulations before installing and using this product.
4Switch off the car engine.
1. Clean and degrease the spot where you want to fix the product.
4Place the product just behind or below the rearview mirror.
2. Place suction fix A2on the windshield.
3. Use the suction fix clip A1to fix the product to the windshield.
4. Insert a microSD card (not included) into the microSD card slot A4.
5. Adjust the position of the front camera A5for optimal view of the road.
6. Adjust the position of the cabin camera Awfor optimal view of the inside.
4Ensure the product and the power cable are installed and do not interfere
with the sight of the driver or impede with the operation of any driving
controls.
4Always focus your attention on the road.
Connecting the product to a power source
Option 1:
1. Plug the other end of the auxiliary power plug A9into the micro USB port
A3.
2. Plug A9into an auxiliary power outlet.
Option 2:
1. Charge the product using the USB port A3.
4The product automatically switches on and starts recording when you switch
on your car engine.
4The recording time can be set in the menu with the range of 3, 5 or 10
minutes.
4The camera switches off after the engine is off.
Using the product
1. Press power button Atfor 3 seconds to switch the product on or off.
4When switching off the product automatically saves the recordings.
9
Menu
1. Press menu / mode button Ayto enter the menu.
2. Press Ayagain to select the desired option.
3. Press up Auor down Aito navigate through the menu.
4. Press OK Aoto confirm a selection.
5. Press Ayto exit the menu.
4In case of first use: set the correct time and date using the menu settings.
While in standby mode:
Press Ayto toggle between video, photo, and playback mode and menu
settings.
Camera switching mode
• Press Auto switch between camera views.
4Options: front camera, cabin camera or both camera views.
Video mode
1. Press Atfor 3 seconds to enter the video mode.
4The film camera icon in the upper left lights up and starts blinking.
2. Press Aoto start or stop recording.
4Short press Aito switch audio recording on or off.
4The product automatically saves recordings on the microSD card.
Emergency lock
In video mode, press and hold Ayfor 3 seconds to save the recording as a
read-only file.
This recording cannot be overwritten or deleted when not connected to a
computer.
4Disconnect the product before cleaning.
-
Do not open the product.
cKurzanleitung
Dashcam DCAM40BK
Weitere Informationen finden Sie in der erweiterten
Anleitung online: ned.is/dcam40bk
10
Bestimmungsgemäße Verwendung
Die DCAM40BK ist eine Dashboard-Kamera, die an der Windschutzscheibe Ihres
Fahrzeugs angebracht werden kann.
Dieses Produkt ist gedacht zum Aufnehmen von Fotos und Aufzeichnen von
Videos und ist mit einem Beschleunigungssensor und Nachtsichtfunktion
ausgestattet.
Jegliche Modifikation des Produkts kann Folgen für die Sicherheit, Garantie und
ordnungsgemäße Funktionalität haben.
Das Produkt ist nicht für den professionellen Einsatz gedacht.
Spezikationen
Produkt Dashcam
Artikelnummer DCAM40BK
Größe (L x B x H) 100 x 55 x 43 mm
Eingangsspannung 5 VAC
Eingangsstrom 1 A
Batterie Lithium-Ionen-Polymer 3,7 VDC / 200 mAh
Akkukapazität 200 mAh
Stromverbrauch 660 – 750 mAh
Doppelkamera-Aufzeichnung
Lagertemperatur -10 - 70 °C
Betriebstemperatur -10 - 60 °C
Anzeige 2,31 Zoll LCD-Display
Frontkamera IMX323 Sensor + 650NM Kamera
Kabinenkamera IMX323 Sensor + 940NM Kamera
Blickwinkel 140 Grad
Minimale Beleuchtung 1 Lux
Video Video-Schleife / Bewegungserkennung
Videoformat .mp4
Video-Codierung H.264
Videoauösung 2560 x 1440p / 1920 x 1080p / 1280 x 720p
Indice
Lingue:
Altri manuali nedis Telecamera da cruscotto
