NETGEAR PA301 Manuale utente
Model PA310 Network Card Installation Guide
Instructions in this guide are for users of Windows
®
95 and Windows 98 who
are installing the Model PA301 Network Card. For instructions on installing and
verifying the Windows network driver, refer to “Install the Network Card”
on
this page
.
The following seven easy steps are provided in this guide for installing your
Model PA301 Network Card:
1. Verify Package Contents
2. Install the Network Card
3. Connect the Telephone Cables
4. Install the Network Driver
5. Install the Model PA301 Software
6. Access the Internet
7. Access the Network Printers
As a final step, be sure to register your NETGEAR
™
product at
www.NETGEAR.com
.
Unpack the package contents and verify that you have the following:
Verify PC Requirements
The instructions given in this guide are for using the NETGEAR
Model
PA301
Network Card in a PC that has a Microsoft
®
Windows 95 operating system.
Start Here
Verify Package Contents
Model PA301
Network Card
Installation
guide
Resource CD
Telephone cable
(10 ft)
9551FA
Model PA310 Network Card Installation Guide
1. Turn the power off and unplug the power cord from your computer.
2. Remove the PC cover.
3. Choose an available PCI slot (PCI slots are the shorter slots) and
remove the corresponding back plate from the PC chassis.
4. Insert the network card into the PCI slot and fasten the card to the
computer chassis by tightening the screw that is on the PC.
5. Replace the PC cover and reconnect the power cord to the PC.
Note:
Touch a grounded metal object to free yourself of static
electricity before you handle the network card.
Note:
To avoid damaging any components on the network card,
handle it by the edges, using your thumbs to push it securely into the
PCI slot. Make sure the network card is fully inserted into the slot to
prevent the PC operating system from experiencing problems.
Install the Network Card
Network card
Back plate
removed
7983FB
Model PA310 Network Card Installation Guide
Using the telephone cable provided in the NETGEAR package, connect one end
of the telephone cable to the port labeled “TO WALL”on the network card and
the other end of the cable to an available wall jack, as illustrated above.
Using the cable shipped with your telephone or modem, connect that cable to
the port labeled “TO PHONE”on the network card.
If you are using an external analog modem to connect to the Internet, refer to the
following illustration that shows the connections for the wall jack, Model PA301
Network card, external modem, and phone. Note that the captions on the modem
Card, network card, and modem direct you to the outlets where you connect the
cables.
Connect the Telephone Cables
Phone line
behind the
wall
PC with network
card installed PC with network
card installed Printer
(optional)
RJ-11
connectors Telephone
9552FA
Wall jack PC Serial cable External
modem Phone
9571FB
Telephone wire
Model PA310 Network Card Installation Guide
The illustration below depicts the configuration with an internal modem and
shows a closeup of the connections for the wall jack, modem card, Model
PA301 Network Card, and phone. Note that the caption on the modem card and
network card direct you to the outlets where you connect the cable from the wall
jack and the cable that connects to the phone.
Note:
For optimal performance, the Model PA301 Network Card
should be plugged directly into a wall jack, and the modem should be
plugged directly into the network card.
Wall jack
PC with Model PA301 Network Card
and internal modem
To phone
To line
Phone
9572FA
Modem
Model PA301 Network Card
Model PA310 Network Card Installation Guide
This guide provides instructions for installing theWindows Network Driver. The
steps given are for users of Windows 95. However, because all versions of
Windows 95 might not respond the same, windows that are different from those
shown in these instructions might open but prompt you for the same
information, or windows might open in a different order than shown in these
instructions.
If you are using Windows 98, read these instructions thoroughly for an overview
of the steps that are necessary for the installation of the software driver. Follow
the instructions given by the Windows 98 Installation Wizard to install the
driver.
If you have not yet named your PC and your network, before you proceed with
the installation steps, decide on a name for your network and for each PC. You
will be using these names in section 5, “Install the PA301 Software.”
1. Turn on the power to the computer and start Windows.
The new hardware is found and the driver is automatically loaded.
2.
Select “Driver from disk provided by hardware manufacturer,” and
click on OK to open the Update Driver Wizard window.
(A New Hardware Found window might open that is different from the one
above and prompt you to click on Next to open the Update Driver Wizard
window.)
Note:
You must install the network card before installing the
network driver.You need to have theWindows 95 orWindows 98 CD
and the
NETGEAR Phoneline10X Resource
CD ready to use in the
installation process.
Note:
If the “Insert CD”window opens and the “Please insert the
CD labeled Windows”...message appears at any time during the
installation process, insert the Windows CD and click on OK. Then
proceed with the following steps.
Install the Network Driver
New Hardware Found
PCI Ethernet Controller
Select which driver you want to install for your new hardware:
Windows default driver
Driver from disk provided by hardware manufacturer
Do not install a driver (Windows will not prompt you again)
Select from a list of alternate dirvers
OK Cancel Help
Model PA310 Network Card Installation Guide
3.
Insert the
NETGEAR Phoneline10X Resource
CD and click on Next.
4.
Click on Finish to start copying the drivers.
It may take several minutes for the operating system to complete the driver
installation.
Model PA310 Network Card Installation Guide
•If the following window opens:
Make sure the
NETGEAR Phoneline10X Resource
CD is inserted in
the CD drive and click on OK to open the following Copying Files
window:
Be sure the destination is typed correctly in the Copy files from entry
field to point to the root directory of your CD drive (for example, in the
entry field, “G:”represents the CD drive and the backslash (\) represents
the root directory).
Click on OK.
Model PA310 Network Card Installation Guide
•If the following window opens:
Insert your Windows 95 CD and click on OK.
Be sure the destination is typed correctly in the Copy files from entry
field to point to the WIN directory of your CD drive (for example, in the
entry, field “G:”represents the CD drive and the backslash WIN95
(\WIN95) represents the subdirectory). If you are using Windows 95,
type \WIN95 for the subdirectory; if you are using Windows 98, type
\WIN98 for the subdirectory.
Click on OK.
5.
Click on Yes to Restart your PC.
If the System Settings Change window does not open, restart your PC by
using the Start menu; select Shut Down, click on Restart your computer, and
then click onYes.
Model PA310 Network Card Installation Guide
After the system restarts, be sure that the
NETGEAR Phoneline10X Resource
CD is inserted in your CD drive.
1. From the Start menu, select Run and at the prompt, type the following:
G:\setup.exe (“G:” represents the CD drive letter), and click on OK to
open the Welcome window.
FirstGear software automatically detects if all the necessary Windows
network services are installed. If any of the services are missing, FirstGear
installs them automatically.After the services have been installed, the
following FirstGear Network Services Installed window opens:
Click on OK to restart your PC.
When the PC restarts, the Welcome page opens.
Note:
If you have an Ethernet adapter installed in the same PC, you
can use your Ethernet adapter to share your Internet connection. The
Ethernet adapter must be connected to a cable modem, ADSL
modem, or router. However, if your Ethernet adapter is connected to
an Ethernet network instead of a modem or router, you will not be
able to share files and printers between the Phoneline network and
the Ethernet network.
Install the PA301 Software
Altri manuali per PA301
1
Indice
Altri manuali NETGEAR Scheda di rete
NETGEAR
NETGEAR GA620 - PCI Fiber Card Manuale
NETGEAR
NETGEAR RangeMax WPN311 Manuale utente
NETGEAR
NETGEAR FA310TX - 10/100Mbps Fast Ethernet PCI Card Manuale utente
NETGEAR
NETGEAR FA311 - 10/100Mbps PCI Ethernet Interface... Manuale utente
NETGEAR
NETGEAR GA622T - Copper Gigabit Ethernet Card Manuale utente
NETGEAR
NETGEAR RangeMax WN511T Manuale utente
NETGEAR
NETGEAR FA410TX - FA-410 Network Card Manuale utente
NETGEAR
NETGEAR WNCE4004 Manuale utente
NETGEAR
NETGEAR FA312 Manuale utente
NETGEAR
NETGEAR MA701 - 802.11b 11 Mbps Compact Flash Card Manuale utente
NETGEAR
NETGEAR GA620 - PCI Fiber Card Manuale utente
NETGEAR
NETGEAR XAVB6504 Manuale utente
NETGEAR
NETGEAR GA 620T Manuale utente
NETGEAR
NETGEAR PL1010 Manuale utente
NETGEAR
NETGEAR PLW1000 Manuale utente
NETGEAR
NETGEAR MA 301 Manuale utente
NETGEAR
NETGEAR XAV1201/XAVB1201 Manuale utente
NETGEAR
NETGEAR WG111U - Double 108 Mbps Wireless USB 2.0... Manuale utente
NETGEAR
NETGEAR HA501 HA501 HA501 Manuale utente
NETGEAR
NETGEAR GA621 Manuale utente
Manuali Scheda di rete popolari di altre marche
Buffalo
Buffalo AirStation WLI-PCM-L11GP Manuale utente
National Instruments
National Instruments NI 9234 Manuale utente
Hama
Hama 49276 Manuale utente
Linksys
Linksys WCF54G - Wireless-G Compact Flash Card Manuale operativo
Compaq
Compaq Wireless LAN 100 Manuale utente
Bose
Bose PowerMatch Dante Manuale utente