NETGEAR ProSafe GS516TP Manuale utente

Installation Guide

NETGEAR Smart Switch™ GS516TP

Package Contents

•NETGEAR Smart Switch™ GS516TP

•Rubber footpads for tabletop installation

•AC power cord

•Rack-mount kit for rack installation

•Installation guide

•Smart Switch resource CD that includes the Smart Control Center Utility and

GS516TP Hardware Installation Guide. (A link to the online GS516TP Software

Administration Manual is on the resource CD.)

Configure the Switch

Install the Smart Control Center Utility and use it to configure the switch.

Install the Smart Control Center Utility on a Computer

1. Insert the resource CD into your CD drive.

2. Run the Setup program to install the Smart Control Center Utility.

The Installation Wizard guides you through the installation.

Connect Your Smart Switch

If you have a DHCP server in your network, see Connect the Switch to Your

Network.

If you are using static IP addresses in your network, first see Configure the Switch

with a Static IP Address, and then see Connect the Switch to Your Network.

Configure the Switch with a Static IP Address

If you are using a static IP address in your network, configure the switch IP address

before connecting the switch to your network. The default IP address of the switch is

192.168.0.239.

Note: If you are using a DHCP server in your network, this procedure does not apply

to you; instead, go directly to Connect the Switch to Your Network.

1. Set up the computer with a static IP address in the 192.168.0.x subnet.

2. Connect the computer to the switch.

3. Configure the IP address of the switch to match your network configuration.

Connect the Switch to Your Network

1. Connect each computer to an RJ-45 network port on the switch front panel.

Use Category 5 (Cat 5) or better Ethernet cable terminated with an RJ-45

connector to make these connections.

2. Connect the switch to your network.

3. Power on the switch by connecting the AC power cord to an outlet, or by

connecting an Ethernet cable from PD ports 15 or 16 (or both) to a PSE

device.

4. Verify that the computer with the Smart Control Center Utility is on the same

subnet as the switch.

Internet

Configure the Switch with the Smart Control Center

Utility

1. Double-click the Smart Control Center Utility icon on your desktop or

click the icon in the Windows Start menu to run the utility and view this screen.

2. Click the Discover button.

The Smart Control Center Utility finds the switch and displays its MAC address,

IP address, and model number.

May 2013

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134 USA

If the utility does not discover your switch, verify that the cable connections are

secure and that the IP address configuration of the computer is in the same

subnet as the switch, and click the Discover button.

3. Click the row for the switch that you want to configure.

4. Click the Web Browser Access button to view the switch Login screen.

5. Enter the default password of password in lower-case letters and click the

The System Information screen displays.

6. Configure the switch for your network.

For more information, see the GS516TP Software Administration Manual.

Troubleshooting Tips

Here are some tips for correcting simple problems you might have.

•Be sure to power on your computer and switch in the following sequence:

1. Turn on the switch and wait about two minutes.

2. Turn on the computer and connect to the switch.

•Make sure the Ethernet cables are plugged in.

For each powered-on computer connected to the switch, the corresponding

switch LAN port status LED is lit.

•Make sure the network settings of the computer are correct.

In most cases, computers should be configured to obtain an IP address through

DHCP.

If your network uses static IP addresses, be sure that the switch and computer

are configured with valid IP addresses. For more information, see the software

administration manual.

Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product and

use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support.

NETGEAR recommends registering your product through the NETGEAR website.

For product updates and web support, visit http://support.netgear.com.

NETGEAR recommends that you use only the official NETGEAR support

resources.

For additional information about setting up, configuring, and using your smart

switch, see the software administration manual.You can get the manual online at

http://downloadcenter.netgear.com.

Altri manuali per ProSafe GS516TP

Altri manuali NETGEAR Interruttore

NETGEAR

NETGEAR GS110TP - ProSafe Gigabit Smart Switch Manuale

NETGEAR

NETGEAR FS108 - ProSafe 10/100 Desktop Switch Manuale utente

NETGEAR

NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart... Manuale utente

NETGEAR

NETGEAR GS110TUP Manuale

NETGEAR

NETGEAR EN104TP EN104TP EN104TP Manuale utente

NETGEAR

NETGEAR GS716T - ProSafe Switch Manuale

NETGEAR

NETGEAR FVS338 - ProSafe VPN Firewall 50 Router Manuale utente

NETGEAR

NETGEAR FSM7226RS - ProSafe Switch - Stackable Manuale utente

NETGEAR

NETGEAR ProSafe GS108 Manuale utente

NETGEAR

NETGEAR GS605 - Gigabit Desktop Switch Manuale utente

NETGEAR

NETGEAR ProSafe GSM5212P Manuale utente

NETGEAR

NETGEAR M4200 Series Manuale di istruzioni

NETGEAR

NETGEAR M4100 Series ProSAFE Guida utente

NETGEAR

NETGEAR FSM7326P - ProSafe Managed Switch Manuale utente

NETGEAR

NETGEAR ProSafe GS108 Manuale utente

NETGEAR

NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Manuale utente

NETGEAR

NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Manuale

NETGEAR

NETGEAR M6100 Series Manuale utente

NETGEAR

NETGEAR JFS516 Manuale utente

NETGEAR

NETGEAR 7300 Series Manuale utente

NETGEAR

NETGEAR M4300 Intelligent Edge Series Manuale

NETGEAR

NETGEAR GS748T - ProSafe Smart Switch Manuale

NETGEAR

NETGEAR ProSafe GS700TP Manuale utente

NETGEAR

NETGEAR EN104 - Hub - EN Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente