NetMan 204 Manuale utente

- 2 -

INTRODUCTION

Thank you for choosing our product.

The accessories described in this manual are of the highest quality, carefully designed and built in

order to ensure excellent performance.

This manual contains detailed instructions on how to install and use the product.

This manual must be stored in a safe place and CONSULTED BEFORE USING THE DEVICE

for proper usage instructions as well as maximum performance from the device itself.

NOTE: Some images contained in this document are for informational purposes only and may not

faithfully demonstrate the parts of the product they represent.

Symbols used in this manual:

Warning Indicates important information that must not be ignored.

Information Provides notes and useful suggestions for the User.

SAFETY

This part of the manual contains SAFETY precautions that must be followed scrupulously.

The device has been designed for professional use and is therefore not suitable for use in

the home.

The device has been designed to operate only in closed environments. It should be

installed in rooms where there are no inflammable liquids, gas or other harmful substances.

Take care that no water or liquids and/or foreign bodies fall into the device.

In the event of a fault and/or impaired operation of the device, do not attempt to repair it but

contact the authorized service centre.

The device must be used exclusively for the purpose for which it was designed. Any other

use is to be considered improper and as such dangerous. The manufacturer declines all

responsibility for damage caused by improper, wrong and unreasonable use.

- 3 -

ENVIRONMENTAL PROTECTION

Our company devotes abundant resources to analysing environmental aspects in the development

of its products. All our products pursue the objectives defined in the environmental management

system developed by the company in compliance with applicable standards.

Hazardous materials such as CFCs, HCFCs or asbestos have not been used in this product.

When evaluating packaging, the choice of material has been made favouring recyclable materials.

Please separate the different material of which the packaging is made and dispose of all material in

compliance with applicable standards in the country in which the product is used.

DISPOSING OF THE PRODUCT

The device contains internal material which (in case of dismantling/disposal) are considered

TOXIC, such as electronic circuit boards. Treat these materials according to the laws in force,

contacting qualified centres. Proper disposal contributes to respect for the environment and human

health.

manufacturer.

The manufacturer reserves the right to change the product described at any time without prior notice for

improvement purposes.

- 4 -

CONTENTS

DESCRIPTION ____________________________________________________ 6

OVERVIEW ____________________________________________________________6

PACKAGE CONTENTS _____________________________________________________6

FRONT PANEL __________________________________________________________7

Network port _____________________________________________________________ 7

Micro-USB port ___________________________________________________________ 7

Serial port _______________________________________________________________ 7

Led _____________________________________________________________________ 7

Reset button _____________________________________________________________ 8

USERS _______________________________________________________________8

NETWORK SERVICES _____________________________________________________9

SSH_____________________________________________________________________ 9

Serial network ____________________________________________________________ 9

Wake-on-LAN_____________________________________________________________ 9

HTTP____________________________________________________________________ 9

SNMP ___________________________________________________________________ 9

UDP_____________________________________________________________________ 9

Modbus ________________________________________________________________ 10

FTP ____________________________________________________________________ 10

Email___________________________________________________________________ 10

Reports_________________________________________________________________ 10

UPS VALUES AND EVENTS HISTORY LOG ARCHIVE _______________________________11

Eventlog ________________________________________________________________ 11

Datalog _________________________________________________________________ 11

ENVIRONMENTAL SENSORS (OPTIONAL)_______________________________________12

Available sensors ________________________________________________________ 12

INSTALLATION __________________________________________________ 12

CONFIGURATION ________________________________________________ 13

OVERVIEW ___________________________________________________________13

Configuration via HTTPS __________________________________________________ 13

Configuration via USB ____________________________________________________ 14

Configuration via SSH ____________________________________________________ 14

CONFIGURATION VIA SSH OR USB: MENU DESCRIPTION __________________________15

Start menu ______________________________________________________________ 15

Setup menu _____________________________________________________________ 16

IP config menu __________________________________________________________ 18

- 5 -

Time setting menu _______________________________________________________ 19

Scheduled NTP menu _____________________________________________________ 20

UPS config menu ________________________________________________________ 20

Services 1 menu _________________________________________________________ 21

SNMPv1 config menu _____________________________________________________ 22

SNMPv1 community menu _________________________________________________ 22

Email config menu _______________________________________________________ 23

Email logic menu_________________________________________________________ 24

Miscellaneous menu ______________________________________________________ 25

Activation 1 menu ________________________________________________________ 26

Services 2 menu _________________________________________________________ 26

Wake-On-LAN address menu_______________________________________________ 27

Wake-On-LAN delay menu _________________________________________________ 27

Activation 2 menu ________________________________________________________ 28

Sensors Config menu _____________________________________________________ 28

I/O Sensors menu ________________________________________________________ 30

Security menu ___________________________________________________________ 31

Save and load menu ______________________________________________________ 33

Expert mode ____________________________________________________________ 33

CONFIGURATION OF SEVERAL DEVICES _______________________________________33

FIRMWARE UPGRADE ____________________________________________ 34

FIRMWARE UPGRADE VIA HTTP ____________________________________________34

FIRMWARE UPGRADE VIA FTP _____________________________________________34

SNMPV3 CONFIGURATION ________________________________________ 35

MODBUS TCP/IP PROTOCOL_______________________________________ 37

TECHNICAL DATA ________________________________________________ 41

NETWORK CABLE ______________________________________________________41

OPERATING AND STORAGE CONDITIONS_______________________________________41

- 6 -

DESCRIPTION

OVERVIEW

NetMan 204is a device that allows UPS management through a LAN (Local Area Network); the

accessory supports all the main network protocols (SNMP v1 and v3, TCP/IP, HTTP and so on)

and is compatible with Ethernet 10/100Mbps IPv4/6 networks. The UPS can therefore be

integrated easily into medium and large-sized networks.

The device also records UPS values and events in the history log archive and can manage

optional environmental sensors (not supplied with the device, but provided separately)

PACKAGE CONTENTS

NetMan 204

USB cable

CD-Rom (User manual)

Quick start

- 7 -

FRONT PANEL

A: Network port

B: Led

C: Reset button

D: Micro-USB port

E: Serial port

Network port

NetMan 204 connects to 10/100 Mbps Ethernet networks by means of connector RJ45. The LEDs

built into the connector describe the status of the network:

•Left LED:

SOLID YELLOW: NetMan204 has detected a valid link.

FLASHING YELLOW: NetMan204 is receiving or transmitting data packets.

•Right LED

SOLID GREEN: NetMan204 is connected to a network operating at 100 Megabits per second.

Micro-USB port

NetMan 204 makes available an USB communication port through which it is possible to configure

it (see paragraph “Configuration via USB”).

Serial port

NetMan 204 makes available a serial communication port to which you can connect environmental

sensors (not supplied with the device, but provided separately) or a modem (not supplied with the

device) for UPS teleservice.

Led

This led describes the status of NetMan 204:

•SOLID RED: NetMan 204 is not communicating with the UPS (verify PRTK Code).

•FLASHING RED: the DHCP server does not have assigned a valid IP address to NetMan 204.

•OFF: regular working.

- 8 -

Reset button

The reset button allows to restart the NetMan204 or to load a default configuration with a

predefined static IP address.

To reset NetMan204: keep press the reset button until the red led start flashing (ca. 2 seconds)

and then release it.

To load a configuration with predefined static IP address: keep press the reset button; first the

led starts flashing, then turns to solid red (ca. 10 seconds). When the led is solid red, release the

reset button and the NetMan 204 will reboot with:

•IP address: 192.168.0.204

•Netmask: 255.255.0.0

•SSH service enabled

•HTTP service enabled

HTTP and SSH service are enabled temporarily without changing the configuration saved

in non-volatile memory.

USERS

It is possible to access to NetMan 204 with three different users (admin / fwupgrade / user).

Username Default password Privileges

admin admin user with right to modify the configuration

fwupgrade fwupgrade user with right to upgrade the firmware

user user user with right to read and download the log files

- 9 -

NETWORK SERVICES

NetMan 204 implements a series of services based on the main network protocols. These services

can be activated or deactivated according to requirements (see paragraph “Configuration”). A brief

description for each of these is given below.

SSH

By means of a SSH client (available on all the main operating systems) a remote connection with

NetMan 204 can be established to change its configuration (see paragraph “Configuration via

SSH”).

Serial network

To emulate a point-to-point serial connection through the network (TCP/IP protocol) in order to use

special function service software.

Wake-on-LAN

NetMan 204 can send “Wake-on-LAN” command for remote computers boot.

HTTP

Using the HTTP (Hyper Text Transfer Protocol), is possible to configure the NetMan 204 and the

status of the UPS can be monitored by means of a web browser without having to install additional

software. All the most popular web browsers are supported.

SNMP

SNMP (Simple Network Management Protocol) is a communication protocol that allows a client

(manager) to make requests to a server (agent). NetMan 204 is an SNMP agent.

To exchange information, manager and agent use an addressing technique called MIB

(Management Information Base). There is a MIB file for each agent, defining which variables can

be requested and the respective access rights. The agent can also send messages (TRAP) without

a prior request from the manager, to inform the latter of particularly important events. SNMPv3 is

the evolution of SNMP and introduces new important features related to security. (See paragraph

“SNMPv3”).

UDP

UDP (User Datagram Protocol) is a low level network protocol that guarantees speed in the

exchange of data and low network congestion. It is the protocol used by the UPSMon software for

monitoring and control of the UPS.

The UDP connection uses the UDP 33000 port by default but can be configured on other ports

according to requirements.

- 10 -

Modbus

The UPS status can be monitored by means of the standard network protocol MODBUS TCP/IP.

This service is always active on the TCP port 502. The supported function are listed on section

“Modbus TCP/IP protocol”, together with the accessible registers.

FTP

FTP (File Transfer Protocol) is a network protocol used for file exchange. NetMan 204 uses this

protocol for:

1. download of files of the UPS values and events history log archive (Datalog and Eventlog);

2. download and upload of configuration files;

3. firmware upgrade.

In both cases a client FTP is required, configured with these parameters:

•Host: hostname or NetMan 204 IP address;

•User: see chapter “Users”;

•Password: current password.

The connection can also be established using a web browser (all the most popular web browsers

are supported), by inserting the hostname or IP address of the NetMan 204.

NetMan 204 can send a notification e-mail if one or more alarm conditions occur. The e-mails can

be sent to up to three recipients and they can be sent for seven different kinds of alarm.

SMTP (Simple Mail Transfer Protocol) is the protocol used to send the e-mails. They are sent to an

SMTP server on port 25. For more details, see paragraph “Configuration”

Reports

NetMan 204 can send periodic e-mails with an attachment containing the files of the UPS values

and events history log archive.

This service can be used to periodically save the history log archives.

The “Email” service must be enabled in order to send reports; the reports are sent to all the

addresses configured for this service (for more details see paragraph “Configuration”).

Altri manuali per 204

Indice

Altri manuali NetMan Scheda di rete

NetMan

NetMan 101 Manuale utente

NetMan

NetMan 204 Manuale utente

NetMan

NetMan 102 plus Manuale utente

Manuali Scheda di rete popolari di altre marche

FirstComm

FirstComm OBiWiFi5G Manuale utente

Sun Microsystems

Sun Microsystems Interface Adapter Manuale utente

TRENDnet

TRENDnet TU2-ETG Manuale utente

YASKAWA

YASKAWA SI-EN3 Manuale utente

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuale utente

Belkin

Belkin F5D7050 Manuale utente

3Com

3Com EtherLink 3C509B Manuale utente

TRENDnet

TRENDnet TEG-PCITX Manuale utente

Cisco

Cisco MC16E Manuale utente

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuale utente

TwinMOS

TwinMOS Booming Manuale utente

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuale utente

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuale utente

National Instruments

National Instruments NI 9234 Manuale utente

Hama

Hama 49276 Manuale utente

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuale operativo

Compaq

Compaq Wireless LAN 100 Manuale utente

Bose

Bose PowerMatch Dante Manuale utente