MaxTime
sleeping sleeping ...
0H 15th M 30th M 45th M 1H 1H 10th M 1H 25th M 1H 40th M 1H 55th M 2H 10th M
Notes :
1) The device only wakes up and performs data sampling according to MinTime Interval. When it is sleeping, it does not collect data.
2) The data collected is compared with the last data reported. If the data variation is greater than the ReportableChange value, the device reports
according to MinTime interval. If the data variation is not greater than the last data reported, the device reports according to MaxTime interval.
3) We do not recommend to set the MinTime Interval value too low. If the MinTime Interval is too low, the device wakes up frequently and the
battery will be drained soon.
4) Whenever the device sends a report, no matter resulting from data variation, button pushed or MaxTime interval, another cycle of
MinTime/MaxTime calculation is started.
6. IR Delay Configuration
If someone or animal is moving in the monitoring area, RB11E will detect the infrared signal and the red indicator will
flash once. In the meantime, it reports occupied status (at the same time, other sensor status value is also reported).
To save the power, when RB11E detects the infrared signal, it will enter IRDetectionTime period. If there is no infrared
signal detected in IRDetectionTime period. It will report un-occupy.
IRDisableTime is the sampling period during IRDetectionTime (IRDisableTime are 30 seconds by default setting that PIR
is off for first 70% of the period; on for rest 30% of the period).
For example, after triggered, the PIR will turn off the infrared probe for 21 (30 * 70%) seconds to save the power, living
objects within this period will not be detected. PIR will re-open detection function after 21 seconds, if it detects living objects
in this period, the IR delay time will be extended for another 30 seconds till no infrared signal is detected and
IRDetectionTime period is due and RB11E will then report un-occupy.
The infrared sensitivity adjustment knob can be manually adjusted to change the sensitivity of the infrared detection.
When the clockwise rotation, the higher the infrared sensitivity, the easier it is to trigger.
