Newall C80 Manuale utente
N
C80 Digital Readout System
Instruction Manual
Newall Measurement Systems Ltd
N
Notes
N
N
Display Keypad
Axis
Label
Displays
Axis
Select
Keys
Axis
Displays
Function Display
Units Key Mode Key Numeric
Keypad
Function
Keys
Navigation
Keys
Sleep Key Setup Key Enter
(Store Changes)
Clear Entry
Contents
2
N
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Physical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Environmental. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Resolutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Cable connections. . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Mountings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Arm mounting (non-adjustable). . . . . . . . . . . . . . . . 3-1
Arm mounting (adjustable) . . . . . . . . . . . . . . . . . . . 3-1
Face mounting (adjustable). . . . . . . . . . . . . . . . . . . 3-1
Lathe mounting (adjustable) . . . . . . . . . . . . . . . . . . 3-2
Lathe mounting (adjustable) . . . . . . . . . . . . . . . . . . 3-2
Display and keypad. . . . . . . . . . . . . . . . . . . . . . . . 4-1
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Using the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Set up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Setup mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Machine type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Encoder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Radius / diameter . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Direction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Error compensation. . . . . . . . . . . . . . . . . . . . . . . . . 5-3
RS232 options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9
Axis summing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-12
Zero approach . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-12
Taper display axis . . . . . . . . . . . . . . . . . . . . . . . . . .5-12
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-13
Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-13
Standard functions . . . . . . . . . . . . . . . . . . . . . . . .6-1
Setting the datum for each axis. . . . . . . . . . . . . . . .6-1
Digifind. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1
Centerfind . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2
Special functions. . . . . . . . . . . . . . . . . . . . . . . . . .7-1
Mill functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1
Lathe functions . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1
Generic functions. . . . . . . . . . . . . . . . . . . . . . . . . . .7-1
Menu function . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2
Mill functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1
Bolt hole circle . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1
Arc contouring . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-3
Line hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-5
Polar coordinates. . . . . . . . . . . . . . . . . . . . . . . . . . .8-7
Lathe functions . . . . . . . . . . . . . . . . . . . . . . . . . . .9-1
Taper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-1
Tool offsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-2
Summing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-4
Vectoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-5
3
N
Generic functions . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
Sub-datums. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
Jobs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-1
Specifications
1-1
N
Specifications
This chapter details the specifications for the C80.
Electrical
EMC compliance
BS EN 61000-6-4:2001
BS EN 61000-6-2:2001
Power supply unit (supplied)
100 – 240V (47 – 63Hz)
External switch-mode
Conforms to Low Voltage Directive
EN 60 950-1:2001
Physical
Height
265mm (10.43”)
Width
180mm (7.09”)
Depth
(not including connectors)
50mm (1.97”)
Weight
2.9kg (6.38lb)
Environmental
Operating temperature
0 to 45°C
Storage temperature
−20 to 70°C
Environmental conditions
Indoor Use, IP20 (IEC 529)
Relative humidity
Maximum 80% for temperatures up to 31°C decreasing linearly
to 33% at 45°C
Specifications
1-2
N
Disposal
At the end of its life, you should dispose of the C80 system in a
safe manner applicable to electronic goods.
Do not burn.
The casework is suitable for recycling. Please consult local
regulations on disposal of electrical equipment.
Input
Spherosyn or Microsyn encoders.
Resolutions
Spherosyn or Microsyn 10
(menu selection)
5µm (0.0002”)
10µm (0.0005”)
20µm (0.001”)
50µm (0.002”)
Microsyn 5
(menu selection)
1µm (0.00005”)
2µm (0.0001”)
5µm (0.0002”)
10µm (0.0005”)
Spherosyn and Microsyn are registered trademarks of Newall
Measurement Systems Limited.
Newall Measurement Systems Limited reserves the right to
make changes to this document.
Connections
2-1
N
Connections
This chapter shows the cable connections for the C80.
Cable connections
Power Indicator Lamp
2.5mm Power Inlet
15 Vdc ±10% @1A
Equipotential Terminal
(Should be grounded to
machine, using the
lead provided)
RS232 Connection
Cable Anchor
(The power cable should
be secured)
Blanking Plug
(Do not remove these, as they
prevent you accidentally
connecting incorrect encoders)
Encoder Inputs
9-way ‘D’
(All plugs should be
screwed finger tight)
Connections
2-2
N
You can only use the C80 with Newall Spherosyn and Microsyn
analogue encoders.
You need to ensure that:
• You secure all the cables to prevent the connectors from
dropping into hazardous positions (for example the floor or
coolant tray) when you unplug them.
• You route all the cables to prevent them from being caught
on moving parts.
• The C80 is grounded to the machine, using the braided
grounding lead provided, before you turn on the machine
supply.
• You turn off the power by disconnecting the power supply
connector, before you connect the encoder.
Do not connect this unit directly to the mains supply.
If your Newall encoder is not fitted with a D-type connector, then
you can buy an adaptor cable (part no. 307-80980). Contact
your supplier for details.
Altri manuali per C80
1
Indice
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
