9
1.1) AUTO-OFF An Auto-off feature can be enabled to
conserve battery power where the DTW powers down after 5,10 and 15
minutes (depend on Auto-off time) since the last key press. The auto-off
symbol will appear in the main display if you activate this feature.
To access AUTO-OFF menu, Press UP and DOWN to move the
cursor point to AUTO-OFF and press the ENTER key the display will show
the auto-off menu page. Press ESC key to return the setup menu page.
AUTO-OFF MENU
1) OFF
2) 5 MINUTE
3) 10 MINUTE
4) 15 MINUTE
Figure 6 Auto-Off Menu
Use UP and DOWN key to move the cursor. Press the ENTER key
to select auto-off option and return to setup menu page.
1.2) AUTO RESET the Auto reset feature used to set the auto
clear level. This mode works when the reading value is higher than
setting value, causing the peak value to change to a new held value. The
user does not need to press RESET key, since the peak value will
automatically reset. The Auto-Reset symbol will appear in the main
display if you activate this feature.
To set AUTO RESET, Press UP and DOWN to move the cursor
point to AUTO RESET and press ENTER key The display will show the Set
Auto reset menu page. Press ESC key to return the main menu page.
AUTO-RESET MENU
AUTO-RESET = 10.000
UNIT = kgf-cm
“Zero key to reset”
Figure 7 Auto-Reset Menu
Use UP and DOWN keys to change the value, press and hold to
scroll values. When the correct value is reached press ENTER to set NEW
VALUE and return to main menu page. Use UNIT keys to change the unit.
