Nikon D7000 Manuale utente

DIGITAL CAMERA

User's Manual

To display the setup menu, press MENUand select the y(setup menu) tab.

MENUbutton ÷

The setup menu contains the following options:

Formatmemorycard

Saveusersettings

Resetusersettings

LCDbrightness

Cleanimagesensor

Lockmirrorupforcleaning1

Videomode

HDMI

Flickerreduction

Timezoneand date

Language

Imagecomment

1 Not available when battery is low.

236

237

284

286

237

194

237

238

Auto imagerotation 239

ImageDustOff refphoto 240

Battery info 242

Wirelesstransmitter 181

Copyrightinformation 243

Save/loadsettings 244

6PS 162

Virtualhorizon 245

Non-CPUlensdata 159

AFfine tune 246

Eye-Fiupload 2247

Firmwareversion 247

2 Only displayed when compatible Eye-Fi memory card is inserted (_ 247).

To begin formatting, choose a memory card slot and select Yes.

Note that formatting permanently deletes all pictures and other

data on the card in the selected slot. Before formatting, be sure to

make backup copies as required.

[I_ During Formatting

Do not turn the camera off or remove memory cards during formatting.

[] Two-Button Format

Memory cards can also be formatted by pressing the ,0_ (_ and -'o'-) buttons for more than

two seconds (_ 32).

236

Press •or • to choose monitor brightness. Choose higher

values for increased brightness, lower values for reduced

brightness.

[] Live View

See page 49 for information on adjusting monitor brightness in live

view or during movie recording.

When connecting the camera to a television or VCR via the video connector, be sure

the camera video mode matches the device video standard (NTSC or PAL).

Reduce flicker and banding when shooting under fluorescent or mercury-vapor

lighting during live view or movie recording. Choose a frequency which matches

that of the local AC power supply.

[] Flicker Reduction

If you are unsure as to the frequency of the local power supply, test both options and choose

the one that produces the best results. Flicker reduction may not produce the desired results

ifthe subject isvery bright, in which case you should select mode Aor Mand choose a smaller

aperture (larger f-number) before starting live view. Note that flicker reduction is not

available when On is selected for Movie settings >Manual movie settings (_ 60) in mode

Change time zones, set the camera clock, choose the date display order, and turn

daylight saving time on or off.

_=_::'_"i_"i'Si_iion-':_:;'_"i_"i_' ......................................"U_De_°_scrii_iio_n-................

Choose a time zone. The camera clock is automatically set to the time in

Timezone the new time zone.

Set the camera clock (_ 27). If the clock is not set, a blinking _ icon will

Dateand time appear in the control panel.

Dateformat Choose the order in which the day, month, and year are displayed.

Turn daylight saving time on or off. The camera clock will automatically be

Daylightsavingtime advanced or set back one hour. The default setting isOff.

237

Choose a language for camera menus and messages. The following options are

available.

Option

_:e_tina

Dansk

Deutsch

English

Espahol

Eran_ais

Indonesia

Italiano

Czech

Danish

German

English

Spanish

French

Indonesian

Italian

Nederlands Dutch

Norsk Norwegian

Polski Polish

Portugu_s Portuguese

PyccK_ Russia n

Suomi Finnish

Svenska Swedish

T_rk_:e Turkish Dq_q_/l_J

Arabic

Traditional

Chinese

Simplified

Chinese

Japanese

Korean

Thai

Add a comment to new photographs as they are taken. Comments can be viewed as

metadata in ViewNX 2 (supplied) or Capture NX 2 (available separately; _ 281). The

comment is also visible on the third shooting data page in the photo information

display (_ 169).

• Done: Save changes and return to the setup menu.

• Input comment: Input a comment as described on page 137. Comments can be

up to 36 characters long.

•Attach comment: Select this option to attach the comment

to all subsequent photographs. Attach comment can be

turned on and off by highlighting it and pressing I_.

238

PhotographstakenwhileOnisselectedcontaininformationoncameraorientation,

allowingthemtoberotatedautomaticallyduringplayback(_ 163)orwhenviewed

inViewNX2(supplied)orinCaptureNX2(availableseparately;_ 281).The

followingorientationsarerecorded:

Landscape (wide) Camera rotated 90° Camera rotated 90°

often tation clockwise coun ter-clockwise

Camera orientation is not recorded when Off is selected. Choose this option when

panning or taking photographs with the lens pointing up or down.

[] Rotate Tall

To automatically rotate "tall" (portrait-orientation) photographs for display during playback,

select On for the Rotate tall option in the playback menu (_ 200). Note that because the

camera itself is already in the appropriate orientation during shooting, images are not

rotated automatically during image review (_ 163).

239

Acquire reference data for the Image Dust Off option in Capture NX 2 (available

separately; for more information, see the Capture NX 2 manual).

Image Dust Off ref photo is available only when aCPU lens is mounted on the

camera. A lens with a focal length of at least 50 mm is recommended. When using a

zoom lens, zoom all the way in.

Choose a start option.

Highlight one of the following options and press

_). To exit without acquiring image dust off data,

press MENU.

• Start:The message shown at right will be

displayed and "rEF" will appear in the

viewfinder and control panel displays.

•(lean sensorandthen start: Select this option to

clean the image sensor before starting. The

message shown at right will be displayed and

"rEF" will appear in the viewfinder and control

panel displays when cleaning iscomplete.

o-EF

[I_ Image Sensor Cleaning

Dust off reference data recorded before image sensor cleaning is performed can not

be used with photographs taken after image sensor cleaning is performed. Select

Clean sensor and then start only if the dust off reference data will not be used with

existing photographs.

2Frame a featureless white object in the viewfinder.

With the lens about ten centimeters (four inches) from a well-lit, featureless

white object, frame the object so that it fills the viewfinder and then press the

shutter-release button halfway.

In autofocus mode, focus will automatically be set to infinity; in manual focus

mode, set focus to infinity manually.

240

3Acquire dust off reference data.

Pressthe shutter-release button the rest of the way down to acquire image Dust

Off reference data. The monitor turns off when the shutter-release button is

pressed. Note that noise reduction will be performed if the subject is poorly lit,

increasing recording times.

Ifthe reference object is too bright or too dark, the camera

may be unable to acquire Image Dust Off reference data

and the message shown at right will be displayed. Choose

another reference object and repeat the process from

step 1.

[I_ Image Dust Off Reference Data

The same reference data can be used for photographs taken with

different lenses or at different apertures. Reference images can not be

viewed using computer imaging software. A grid pattern isdisplayed

when reference images are viewed on the camera.

241

View information on the battery currently inserted in the

camera.

Bat.meter

Pic.meter

Batteryage

Description

The current battery level expressed as a percentage.

The number of times the shutter has been released with the current battery

since the battery was last charged. Note that the camera may sometimes

release the shutter without recording a photograph, for example when

measuring preset white balance.

A five-level display showing battery age. 0 (_l) indicates that battery

performance is unimpaired, 4 (_,__)that the battery has reached the end of its

charging life and should be replaced. Note that batteries charged at

temperatures under about 5 °C (41 °F) may show a temporary drop in

charging life; the battery age display will however return to normal once the

battery has been recharged at a temperature of about 20 °C (68 °F) or higher.

[] The MB-D11 Battery Pack

The display for the MB-D11 battery pack is shown at right. IfAA

batteries are used, the battery level will be shown by a battery level

icon; other items will not be displayed.

242

Add copyright information to new photographs as they are taken. Copyright

information is visible on the fourth shooting data page in the photo information

display (_ 169) and can be viewed as metadata in ViewNX 2 (supplied) or in

Capture NX 2 (available separately; _ 281 ).

• Done: Save changes and return to the setup menu.

•Artist: Enter a photographer name as described on page 137. Photographer

names can be up to 36 characters long.

•Copyright: Enter the name of the copyright holder as described on page 137.

•Attach copyright information: Select this option to attach

Attach copyright information can be turned on and off by

highlighting it and pressing I_.

To prevent unauthorized use of the artist or copyright holder names, make sure that Attach

before lending or transferring the camera to another person. Nikon does not accept liability

for any damages or disputes arising from the use of the Copyright information option.

243

Select Save settings to save the following settings to the memory card in Slot I (if

the memory card is full, an error will be displayed; _ 306).

Playback

Shooting

Option ..... ='_--Me°nu_I_

Display mode Custom

Image review settings

Afte r del ete

Rotate tall

Role played by card in Slot 2

Image quality

Image size

JPEG compression

recording

(with fine tuning

and presets d-O-d-4)

Set Picture Control

Auto distortion control

Color space

Active D-Lighting

Long exp. NR

High ISO NR

settings

Movie settings

Remote control mode

Setup

My Menu/

Recent

Settings

_!! Option

All Custom Settings except Reset

custom settings

Clean image sensor

Video mode

HDMI

Flicker reduction

Time zone and date (excepting

date and time)

Language

Image comment

Auto image rotation

GPS

Non-CPU lens data

All My Menu items

All recent settings

Choose tab

Settings saved using this model of camera can be restored by selecting Load

settings. Note that Savelload settings is only available when a memory card is

inserted in the camera, and that the Load settings option is only available if the card

contains saved settings.

[] Saved Settings

Settings are saved in a file named NCSETUP7. The camera will not be able to load settings if

the file name is changed.

244

Altri manuali per D7000

Altri manuali Nikon Macchina fotografica digitale

Nikon

Nikon D3body - D3 Body 12mp FX Digital SLR Camera Guida utente

Nikon

Nikon D2XS Manuale utente

Nikon

Nikon D300 Manuale utente

Nikon

Nikon D200 Manuale utente

Nikon

Nikon D2XS Manuale utente

Nikon

Nikon Coolpix L100 Manuale utente

Nikon

Nikon D300 Manuale utente

Nikon

Nikon COOLPIX S1200pj Manuale utente

Nikon

Nikon COOLPIX L1 Manuale utente

Nikon

Nikon COOLPIX 885 Manuale utente

Nikon

Nikon D-40 - D40 6.1MP The Smallest Digital SLR... Manuale utente

Nikon

Nikon D850 Manuale utente

Nikon

Nikon CoolPix P500 Manuale utente

Nikon

Nikon D500 Manuale utente

Nikon

Nikon Coolpix L340 Manuale utente

Nikon

Nikon COOLPIX S1000pj Manuale utente

Nikon

Nikon COOLPIX S800c Manuale utente

Nikon

Nikon D700 Manuale utente

Nikon

Nikon D5100 Manuale utente

Nikon

Nikon COOLPIX 56300 Manuale utente

Nikon

Nikon D300 Manuale utente

Nikon

Nikon OneShot360 CoolPix950 Manuale utente

Nikon

Nikon CoolPix S80 Manuale utente

Nikon

Nikon CoolPix S560 Manuale del proprietario

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente

Samsung

Samsung SCC-C4253 Manuale utente