Ningbo DK-Em4PS Manuale utente

Ningbo Putian Communication Technology Co., Ltd

DK-Em4PS

Instruction for DK-Em4PS Auto-dial testing

Device

- 1 -

Ningbo Putian Communication Technology Co., Ltd

Table of Contents

1、OVERVIEW.......................................................................................................................... 3

2、PERFORMANCE AND CHARACTERISTICS FOR PRODUCTS....................................... 4

2.1. BASIC FUNCTIONS AND FEATURES........................................................................... 4

2.2. OPERATION MODE FOR COMMUNICATION .............................................................. 4

3、PERFORMANCE INDICATORS FOR ALL KINDS OF CHANNEL.................................... 5

4、PERFORMANCE INDICATORS FOR DEVICE................................................................... 6

5、DESCRIPTION FOR DK-EM4PS INSTALLATION............................................................. 7

5.1. ANTENNA INSTALLATION............................................................................................. 7

5.2. POWER CONNECTION................................................................................................. 7

5.3. USB CABLE CONNECTION........................................................................................... 8

5.4. NETWORKING ............................................................................................................... 9

5.5. INDICATOR DESCRIPTION........................................................................................... 9

5.6. CASE SIZE ..................................................................................................................... 9

6、INSTRUCTION FOR DK-EM4PS DEVICE........................................................................ 10

6.1. DESCRIPTION FOR SIM CARD INSTALLATION........................................................ 10

6.2. DESCRIPTION FORAPPLICATION PROGRAM INSTALLATION .............................. 14

6.4. DESCRIPTION FORAPPLICATION PROGRAM'S USE............................................. 18

6.5. NOTES.......................................................................................................................... 20

7、FCC STATEMENT............................................................................................................. 21

- 2 -

Ningbo Putian Communication Technology Co., Ltd

1、Overview

DK-Em4PS Auto-dial testing Device is a Wireless Test Product based

on Mobile communication network platform, this product is tested up to 4

channels embedded。Test channel can be configured according to test

requirements. including 2 channels for GSM and 2 channels for TD-SCDMA.

The device adopts standard design of industrial-grade, with English and

Chinese SMS sending, voice and wireless data mode functions and etc.

Users can connect with PC by USB2.0 port & Ethernet Interface。This

device can be widely used in monitoring for mobile network coverage。

- 3 -

Ningbo Putian Communication Technology Co., Ltd

2、Performance and Characteristics for products

2.1. Basic functions and features

2.1.1. Extend up to 4 test channels, reality a multi-channel for voice, data,

wireless transmission function between different Signal System mobiles。

2.1.2. Testing Communication & test channel for 4 channels can be configured

according to any requirement。

2.1.3.Support GSM Module, can be Transmit with 4 different Signal System

channel,。

2.1.4. ARM11 Processor Embedded can carry on management of

multi-channels & Switching Control；

2.2. Operation mode for Communication

2.2.1.USB port: This port can carry out High-Speed Communication between

local computers, data dial, voice, SMS functions and etc.

2.2.2. Ethernet Interface: this interface supply connection between device and

computers, is used for Configuration of device parameters and functions, it is

easy to maintenance device。

- 4 -

Ningbo Putian Communication Technology Co., Ltd

3、Performance Indicators for all kinds of channel

Performance Indicators for GSM channel Module

Basic

characteristics Description remark

Signal System GSM Default

Configuration

Frequency band

850/900/1800/1900MHz

Transmit Power

Class 4 (+33dBm ± 2dB) for EGSM850

Class 4 (+33dBm ± 2dB) for EGSM900

Class 1 (+30dBm ± 2dB) for GSM1800

Class 1 (+30dBm ± 2dB) for GSM1900

Class E2 (+27dBm ±3dB) for GSM 850 8-PSK

Class E2 (+27dBm ±3dB) for GSM 900 8-PSK

Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK

Class E2 (+26dBm +3 /-4dB) for GSM 1900 8-PSK

Data

Transmission

GPRS：

Multislot Class 12

Full PBCCH support

Mobile Station Class B

Coding Scheme 1-4

EGPRS：

Multislot Class 10

Mobile Station Class B

Modulation and Coding Scheme MCS 1-9

CSD：

V.110, RLP, non-transparent

2.4, 4.8, 9.6, 14.4kbps

USSD：

PPP-stack for GPRS data transfer

SMS

MT, MO, CB, Text and PDU mod

SMS storage: SIM card

Support transmission of SMS alter

User can choose preferred mode.

SIM card Supported SIM card: 1.8V ,3V

External

antenna

Connected via 50 Ohm antenna connector or antenna pad

- 5 -

Ningbo Putian Communication Technology Co., Ltd

4、Performance Indicators for device

Type DK-Em4PS

Power Supply of Module

(10～30)V DC

Power Supply (85～264)V AC 50/60Hz (Adapter)

Grounding earthing of casing

System power <20W

Case Size 290mm*190mm*45mm

Case design Vibration、Drop resistance 、Waterproof

Specifications

Mean Time Between Failure ≥10000 hours

Others

Work Temperature ≥－10℃，≤＋55℃

Storage temperature ≥－20℃，≤＋65℃

Normal humidity ≤95%

Work atmosphere ≥62 kPa，≤106kPa

- 6 -

Ningbo Putian Communication Technology Co., Ltd

5、Description for DK-Em4PS Installation

5.1. Antenna Installation

There are 4 SMAports at the top of a device; users install Antenna with

different Module Configurations according to channels and 1-4 Numerical

order on it。As shown in Figure 5-1-1：

Figure 5-1-1 Location of Antenna installation

Note：The antenna must be installed before a device switched on!

Otherwise, the module may be damaged!

5.2. Power Connection

Insert an Adapter intoAC220V (different adapters for different counties)

Power Line, then insert into an Outlet, finally a 12V output is connected

with the power interface. When the output of an adapter is inserted into the

power interface, a device will Open automatically。The position for a Power

Interface as shown in Figure 5-2-1:

- 7 -

Ningbo Putian Communication Technology Co., Ltd

- 8 -

Figure 5-2-1 Power Interface

5.3. USB cable connection

One end of the USB cable is inserted into the device USB interface,

the other end connected to a network。It is used for Data transmission and

control of DK-Em4PS Device。USB port is shown in Figure 5-3-1：

Figure5-3-1Port

Ningbo Putian Communication Technology Co., Ltd

5.4. Networking

The RJ45 plug of one end of network cables is inserted into the

network interface and the other end connected to the network switch。It is used

for the Remote Control of DK-Em4PS device。An Interface is shown in Figure

5-3-1：

5.5. Indicator Description

Indicator Normal Abnormality

CH1 Light or flashing Dim (No channel)

CH2 Light or flashing

Dim (No channel)

CH3 Light or flashing Dim (No channel)

CH4 Light or flashing Dim (No channel)

PWR Light Dim (No Power Input)

5.6. Case size

Shell adopts aluminum alloy with waterproof, impact resistant to, the size of

case is 290mm*190mm*45mm, as shown in figure 5-6-1:

Figure 5-6-1 shape and fixed pore size

- 9 -

Ningbo Putian Communication Technology Co., Ltd

6、Instruction for DK-Em4PS Device

6.1. Description for SIM card Installation

Use Triangular screwdriver to open the six triangular screws at the right

baffle of DK-Em4PS device。Move off the right baffle of it, the corresponding

relationship, between SIM card slot and module channels is shown in Figure

6-1-1：

Figure 6-1-1

When install SIM card, just press the yellow button on the left of each slot,

can pull out the SIM card sets of a corresponding channel, if need SIM card

embedded , insert the card slot once again。

Driver Installation for Module

Let Device connect with a power supply firstly, operate it, and then insert

one end of the USB cable into the Mini-USB port on the left side of the

Mini-USB device, insert the USB A-type port of The USB cable into PC with

Windows system。After all, Open the Device Manager，Will appear information

of the device shown in Figure 6-2-1。

- 10 -

Indice

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente