10
... 3. Making coffee
3.2 Selecting water quantity
You can freely select the quantity of
water used by turning the water
quantity control knob (fig. 1/D and 6),
(the empty cup bottom left represents
less water, the full cup bottom right
represents more water).
➔ The selected quantity of water is
displayed in the upper line of the dis-
play screen.
➔ Water quantity can be adjusted in
10ml steps from 20ml to 240ml by
turning the water quantity control knob
from left to right.
20ml to 70ml for espresso or cap-
puccino
80ml to 130ml for American coffee
140ml to 240ml for café latte
Tip: The water quantity can be adjust-
ed while the machine is running. Try
out various cup sizes and quantities
to find the setting that best meets
your personal preference.
3.3 Making one cup of coffee
➔ Place your (pre-heated) cup under
the coffee spout (fig. 1/J or 5). The
coffee spout is height-adjustable and
can be raised or lowered to best suit
the cup size.
➔ For “My Coffee” function press 1
cup button for approx. 3 seconds.
Please further details at chapter 4.1
“My Coffee”. Otherwise:
➔ Set the water quantity and coffee
strength (fig. 1/D and 1/E).
➔ Press the 1-cup button (fig. 1/F).
➔ The machine now starts the grind-
ing and brewing operation.
The brewing operation can be cancel-
led at any point by pressing the 1-cup
(fig. 1/F) or 2-cup button (fig. 1/G).
Caution: The grinding chamber is
empty the first time you brew a coffee.
“FILL UP BEANS” may therefore
appear in the display after the first
grinding, and no coffee is brewed. If
this occurs, simply press the 1-cup
button (fig. 1/F) again and the opera-
tion is repeated.
Tip: To determine the ideal quantity of
water for your taste or cup size, make
your first cup of coffee as follows:
➔ Turn the water quantity control
knob (fig. 1/D and 6) to one of the
following positions:
· ‘100ml’ for a small (espresso) cup.
· ‘240ml’ for a large cup.
➔ Press the 1-cup button (fig. 1/F).
➔ The machine starts brewing.
➔ Shortly before the desired amount
of coffee is reached, turn the water
quantity control knob (fig. 1/D and 6)
slowly to the left, until the machine
stops running.
➔ You can now read in the display
how much water is required for your
desired cup / coffee quantity.
3.4 Making two cups of coffee
In the 2-cup operation, two cups of
coffee are brewed consecutively.
➔ Place both (pre-heated) cups under
the coffee spout (fig. 1/J and 5).
➔ For “My Coffee” function press
2 cup button for approx. 3 seconds.
Please further details at chapter 4.1
“My Coffee”. Otherwise:
➔ Select the desired coffee strength
and water quantity settings for one cup
(with the buttons see fig. 1/D and 1/E).
