Instruction Manual/Supplement
General
Page 2 Modbus Extension Module NF Energy Saver - rev. 00 / 24.04.2019
1 General
Important Note
This instruction manual may exclusively – even in parts – be copied or translated in any
other way with the express written consent of NIVUS GmbH.
Disclaimer
The manufacturer assumes no liability
for damages owing to a change of this document. The manufacturer reserves the
right to change the contents of this document and this disclaimer at any time and
without any notice.
for damages to persons or objects resulting from failure to comply with applicable
regulations. For connection, commissioning and operation of the devices/sensors
all available information and higher local legal regulations (e. g. in Germany VDE
regulations) such as applicable Ex regulations as well as safety requirements and
regulations in order to avoid accidents shall be adhered to.
for damages to persons or objects resulting from improper use. For safety and
warranty reasons, all internal work on the instruments beyond from that involved in
normal installation and connection, must be carried out only by qualified NIVUS
personnel or persons or companies authorised by NIVUS.
for damages to persons or objects resulting from the use of instruments in techni-
cally imperfect condition.
for damages to persons or objects resulting from the use of instruments not in ac-
cordance with the requirements.
for damages to persons or objects resulting from failure to comply with safety in-
formation contained within this instruction manual.
for missing or incorrect measurement values or resulting consequential damages
due to improper installation.
2 Preconditions
WARNING Instruction Manual for Extension Module not valid all by itself
This supplement cannot be considered as a fully adequate instruction manual by itself and
needs to be read and used always together with the NivuFlow Energy Saver transmitter
instruction manual.
This instruction manual is a supplement to the instruction manual for the NivuFlow Energy
Saver.
The following requirements shall be adhered to always and necessarily:
•Content-related knowledge of the NivuFlow Energy Saver instruction manual and the
according safety information.
•Experience in the operation of NIVUS NivuFlow transmitters.
•The sole purpose of this instruction manual is the installation of the Modbus Extension
Module (ZUB0 MOD AIN8) certified by NIVUS; components not verified and authorised
by NIVUS may cause damage to the entire measurement system NIVUS cannot be
held responsible for.
