Norac UC4 Total Control Manuale utente
UC
4
Total Control
Automatic Boom Height
System
Tyler Patriot
Installation Manual
Canada
NORAC Systems International Inc.
CALL TOLL FREE: 1-800-667-3921
(306) 664-6711
SHIPPING ADDRESS:
3702 Kinnear Place
Saskatoon, SK
S7P 0A6
United States
NORAC, Inc.
CALL TOLL FREE: 1-866-306-6722
(763) 786-3080
SHIPPING ADDRESS:
1290 Osborne Rd. NE, Suite F
Fridley, MN
55432-2892
For other service locations please view our website:
www.norac.ca
Improving the Competitiveness of Industry and Agriculture through Precision
Measurement
Printed in Canada
Copyright 2005-07 by NORAC Systems International Inc.
Reorder P/N: UC4-BC-PT1-INST Rev B (Tyler Patriot)
NOTICE
NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without
the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information
contained in this manual. The technical information in this manual was reviewed at the time of approval for publication.
TABLE OF CONTENTS
1 INTRODUCTION .................................................................................................................................. 2
2 GENERAL SYSTEM DESCRIPTION .................................................................................................. 3
3 PARTS LIST......................................................................................................................................... 4
4 INSTALLATION PROCEDURE ........................................................................................................... 8
4.1 EXISTING HYDRAULIC SYSTEM FUNCTION CHECK ................................................................................ 8
4.2 BOOM SPEED TEST ............................................................................................................................ 9
4.3 WING SENSOR INSTALLATION ........................................................................................................... 11
4.4 MOUNTING THE MAIN SENSOR AND TARGET ...................................................................................... 15
4.4.1 The Mounting Brackets ......................................................................................................... 15
4.4.2 Mounting on the Boom ......................................................................................................... 16
4.5 HYDRAULIC INSTALLATION................................................................................................................ 21
4.5.1 Valve Assembly and Mounting .............................................................................................. 21
4.5.2 Hydraulic Plumbing ............................................................................................................... 24
4.6 ELECTRICAL INSTALLATION .............................................................................................................. 25
4.7 COMPLETING THE INSTALLATION....................................................................................................... 29
5 ELECTRICAL REFERENCE – CABLE DRAWINGS ........................................................................ 30
5.1 ITEM C1: 44662B-40 –SENSOR TRUNK CABLE ................................................................................ 30
5.2 ITEM C2: 44668 –SENSOR BRANCH CABLE ..................................................................................... 30
5.3 ITEM C3: 44656 –VALVE CABLE (VARIABLE RATE) .......................................................................... 31
5.4 ITEM C4: 44651 –VALVE EXTENSION CABLE .................................................................................... 31
5.5 ITEM C10: 44650-02 –POWER CABLE VERSION 2............................................................................ 32
5.6 ITEM C12: 44659 –VALVE CASE/PATRIOT/APACHE.......................................................................... 33
2
1 INTRODUCTION
Congratulations on your purchase of the NORAC UC4 Automated Sprayer Boom
Height Control System. This system is manufactured with top quality components
and is engineered using the latest technology to provide operating features and
reliability unmatched for years to come.
When properly used the system can provide protection from sprayer boom damage,
improve sprayer efficiency, and ensure chemicals are applied correctly.
Please take the time to read this manual completely before attempting to install the
system. A thorough understanding of this manual will ensure that you receive the
maximum benefit from the system.
YOUR INPUT CAN HELP MAKE US BETTER! If you find issues or have
suggestions regarding the parts list or the installation procedure, please
don’t hesitate to contact us via the information given below:
Phone: 1-800-667-3921 in Canada (Toll Free)
1-866-306-6722 in the United States (Toll Free)
0-800-404-8389 United Kingdom (Toll Free)
1-306-664-6711 all other regions
E-mail: [email protected]
Website: www.norac.ca
3
2 GENERAL SYSTEM DESCRIPTION
Figure 1 depicts the general system layout of the UC4 Sprayer Boom Control
system.
Figure 1 – System Components and General Location
NOTICE:
Every effort has been made to ensure the accuracy of the information contained in
this manual. All parts supplied are selected specially to fit the sprayer to facilitate
a complete installation. However, NORAC cannot guarantee all parts fit as
intended due to the variations of the sprayer by the manufacturer. Please read
this manual in its entirety before attempting installation.
ATTENTION:
When installing the UC4 System please be aware that at a point in the installation
your sprayer booms will be inoperative until the installation is complete. Any
installation procedure requiring boom movement will need to be done
first. Once the hydraulics have been disconnected you must complete the electrical
installation before the booms become operative.
4
3 PARTS LIST
The parts that come with your UC4 Sprayer Boom System are listed in Table 1. In
this document, the item number shown on the left side of this table references each
part.
Please ensure that all parts in your kit are present before proceeding with
your installation.
Table 1 – Tyler Patriot Sprayer Boom Control System Parts
Item Part Number Description Pcs Len
UC4-BC-PT1 KIT HARDWARE UC4 BOOM CONTROL TYLER
PATRIOT
1 EA
* BRACKET PARTS *
B10 44704 MOUNTING BRACKET UC3-BC VALVE 1 EA
B11 44740 MOUNTING BRACKET ROLL SENSOR UC4 1 EA
B12 44741 MOUNTING BRACKET ROLL SENSOR TARGET UC4 1 EA
B13* 44728 MOUNTING BRACKET COMPLETE UC4 BREAKAWAY
EXTENDED
2 EA
* CABLE PARTS *
C1 44662B-40 CABLE UC3 SENSOR TRUNK AMPF TO AMPF BLACK
STANDARD 40FEET
1 EA
C2 44668 CABLE UC3 SENSOR 1 AMP RECEPT 3 AMP PLUG
BC
1 EA
C3 44656 CABLE VALVE VARIABLE RATE 1 EA
C4 44651 CABLE VALVE EXTENSION 1 EA
C10 44650-02 CABLE POWER UC3 VERSION 2 (STANDARD BOOM
CONTROL)
1 EA
C12 44659 CABLE VALVE PATRIOT/CASE IH 4260 2 EA
* ELECTRONIC PARTS *
E1 4461BC UC4 BOOM CONTROL PANEL 1 EA
E2 44631 UC4 ULTRASOUND SENSOR 3 EA
5
Item Part Number Description Pcs Len
* HYDRAULIC PARTS *
V1 44933
or
44933S
VALVE PACKAGE CC LS PROP 2 STATION
EXPANDABLE W/FILTER
VALVE BLOCK ASSEM UC4-BC 2-STATION CC/LS
VARIABLE RATE
1 EA
H1 103345 COUPLING HYD 6MJ 6FJX90 2 EA
H2 100655 HYD HOSE 2 WIRE 3/8 IN 2 48 IN
102897 HYD HOSE END 6WC 6FJX 4 EA
H3 104614 COUPLING HYD 6FJ 4MJ 4 EA
H4 104704 COUPLING HYD 4FJCN 4 EA
H5 103312 COUPLING HYD 6MB 6MJ 2 EA
H50 44928 ORIFICE INSERT .047 IN ONE WAY 4 EA
H51 103312 COUPLING HYD 6MB 6MJ 6 EA
* MISC. PARTS *
M1 446BC-MAN MANUAL UC4 BOOM CONTROL OPERATORS 1 EA
M2 100084 TIE CABLE 21 IN BLACK 10 EA
M3 100091 TIE CABLE 7.5 IN BLACK 150 EA
M4 104409 FOAM DISC 45 PPI CONDUCTIV 1/2 X 2-5/8
DIA
6 EA
M5 105435 CHAIN 1/2 IN PLASTIC 3 42 IN
M6 100660 BOLT HEX NC GR5 PLTD 1/4X1 3 EA
M7 100853 NUT HEX NC GR5 PLTD 1/4 IN 3 EA
M10 UC4-BC-PT1-
INST
MANUAL INSTALLATION UC4 PATRIOT 1 EA
M11 105304 BOLT HEX NC GR5 PLTD 3/8X5-1/2 2 EA
M12 100947 WASHER LOCK SPRING PLTD 3/8 IN 2 EA
M14 44942 TUBING PLASTIC CLEAR PETG 2.75X.28
SLOTTED
1 16 IN
* In a kit shipped prior to February 1, 2007, the part number for Item B13 is 44722.
6
The parts that come with your UC4 System are shown below in their general
installation configuration.
Figure 2 – UC4-BC Components
7
Figure 3 – Hydraulic Components
8
4 INSTALLATION PROCEDURE
Before installing the NORAC UC4 Boom Control System to your sprayer, it is
necessary to check that all functions of the existing hydraulic system are working
properly.
Furthermore, it is informative to determine how quickly your sprayer booms and
main (center) section are able to change their position without the UC4 System
installed. Doing so may illustrate the design strengths and constraints of your
sprayer’s mechanical and hydraulic configuration.
This information may also prove valuable when troubleshooting the installation,
and if you need to contact NORAC for installation support. For example, NORAC
support staff may use this information to determine if there are unwanted orifices
(or backwards orifices) remaining in the hydraulic system when the UC4 System is
installed.
Drive your sprayer onto a flat piece of land, without any obstructions in the way of
boom movement (e.g. power lines). Try to gain the best view of the booms and
involved cylinders as you can. This may be best done with two people: one in
the cab, and one outside. Perform following Function Check and Boom Speed
Test.
4.1 E
XISTING
H
YDRAULIC
S
YSTEM
F
UNCTION
C
HECK
Check that all functions of the existing hydraulic system of your sprayer by using
Table 2. There may be more functions in the existing hydraulic system. Please refer
to the sprayer’s operation manual and ensure checking all functions.
Table 2 – Hydraulic System Function Check Sheet
HYDRAULIC SYSTEM FUNCTION
INNER OUTER TIP* FIELD
OPERATION
FOLD UNFOLD FOLD UNFOLD FOLD UNFOLD UP DOWN
LEFT BOOM
RIGHT BOOM
MAIN BOOM N/A N/A N/A N/A N/A N/A
ROLL* N/A N/A N/A N/A N/A N/A
*Some sprayers may not have this function/section.
Altri manuali per UC4 Total Control
11
Questo manuale è adatto per i seguenti modelli
1
Indice
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
