Novell CLIENT FOR LINUX 2.0 SP3 Manuale di istruzioni

novdocx (en) 13 May 2009

Novell®

Novell Client 2.0 SP3 for Linux Installation Quick

Start

ClientTM for Linux

Installing the Novell Client for Linux

This document explains how to install the Novell Client for

Linux software on a workstation.

For information on installing a preconfigured version of the

Novell Client, see “Configuration Files for Preconfiguring

the Novell Client” in the Novell Client for Linux

Administration Guide.

“System Requirements” on page 1

“Using the YaST Control Center to Install the Novell

Client” on page 1

“Using the Installation Script to Install the Novell Client”

on page 2

“Upgrading From Version 2.0 SP1” on page 2

“Uninstalling the Novell Client for Linux” on page 3

SYSTEM REQUIREMENTS

The Novell Client 2.0 SP3 for Linux requires workstations

running on the following:

SUSE®Linux Enterprise Desktop 10 SP3 (32-bit or 64-

bit)

IMPORTANT: Do not install the 32-bit version of the Novell

Client 2.0 SP3 for Linux onto a 64-bit operating system. If

you do so, you will lose the ability to log into the GUI

credential provider. You will see the error message,

“Authentication Failed,” and will be unable to log in.

Ensure that you have one of the following packages

provided by the base operating system that is already

installed on the system. The package that is installed

depends on your kernel type.

novfs-kmp-default

novfs-kmp-smp

novfs-kmp-bigsmp

NOTE: Novell Client CLI packages alone will be installed by

default in case of OES 2. To install the rest of the GUI

packages, you can follow the procedures listed in the

sections below.

novell-nautilus-plugin

and

novell-

konqueror-plugin

rpms provide the GUI for integrating

Novell Client functionality with the file-managers in GNOME

and the KDE desktops respectively.

USING THE YAST CONTROL CENTER TO INSTALL THE

NOVELL CLIENT

Using YaST to install the Novell Client for Linux requires the

following steps:

1. Installing the Novell Client for Linux Packages

2. Starting or Restarting the Novell Client for Linux

Installing the Novell Client for Linux Packages

1Make sure you have updated the workstation to the

latest SUSE Linux Enterprise Desktop 10 SP3

patches.

2Launch the YaST Control Center.

GNOME: Click Computer > More Applications >

System > YaST.

KDE: Click the menu button > System > YaST.

3If you are not logged in as

root

, type the root

password, then click Continue.

4Click Software in the left column, then click Add-on

Product in the right column.

5Select the appropriate Add-on Product source (such as

CD, DVD, or Local Directory), then click Next.

TIP: Select Local Directory if you downloaded the file

from Novell Downloads (http://download.novell.com).

6Follow the on-screen instructions for the installation

source you specified in Step 5.

For example, you might be prompted to insert the

Novell Client for Linux CD, or to specify which local

directory contains a copy of the downloaded Novell

Client for Linux files.

7Select Yes, I Agree to the License Agreement, then

click Next.

8Select Patterns from the Filter drop-down list.

9Select Novell Client for Linux in the Additional Software

category.

novdocx (en) 13 May 2009

10 The Novell Client for Linux check box should already

be selected. If it is not, select it to automatically select

all packages for installation.

11 Click Accept to install all of the Novell Client for Linux

packages.

12 Start the Novell Client for Linux.

See “Starting or Restarting the Novell Client for Linux”

on page 2.

For more information, see “Using the Novell Client Tray

Application” in the Novell Client for Linux User Guide.

Starting or Restarting the Novell Client for Linux

Use any of the following methods to start or restart the

Novell Client for Linux:

Restart the Linux Workstation: This is the best way

to ensure that the Novell Client for Linux is completely

restarted.

Manually Start the Novell Client: Open a terminal

window and log in as root. Run the following

commands:

New Installations:

rcnovell-xregd start

This command loads XTier registry service that is

needed by Novell Client for Linux daemon

modules.

rcnovfsd start

This command loads Novell file system kernel

module and daemon modules of Novell Client for

Linux.

Updates:

rcnovell-xregd restart

This command stops and reloads XTier registry

service that is needed by Novell Client for Linux

daemon modules.

rcnovfsd restart

This command stops and reloads Novell file

system kernel module and daemon modules of

Novell Client for Linux.

Manually launch Novell Client tray application by

running the command

/opt/novell/ncl/bin/

ncl_tray

either on the command line of a terminal

window or in Run Application utility that can be

launched by pressing Alt-F2.

If any of these commands display any errors, restart

the Linux* machine.

USING THE INSTALLATION SCRIPT TO INSTALL THE

NOVELL CLIENT

NOTE: An installation script called

ncl_install

provided in the Novell Client for Linux

.iso

file that you

downloaded from Novell Downloads (http://

download.novell.com). This script can be used to install,

update, verify installation, display information, and uninstall

the Novell Client directly from a command prompt using

documented RPM commands. This same script is copied to

the

/opt/novell/ncl/bin

directory during the installation

of the Client for later use in verifying or uninstalling the

Client.

WARNING: You must not use the

ncl_install

script for

install and uninstall operations on OES2 SP2.

Run these commands from the directory in which you have

mounted the Client download file or from

/opt/novell/

ncl/bin

after the initial installation. You must be logged in

root

to run these commands.

Table 1 ncl_install Commands

UPGRADING FROM VERSION 2.0 SP1

NOTE: Upgrading from an earlier version of the Novell

Client for Linux is not supported. You must upgrade your

workstation to atleast Novell Client version 2.0 SP1 before

upgrading to 2.0 SP3.

To use YaST to upgrade from the Novell Client 2.0 SP1 for

Linux to 2.0 SP3, follow these steps. You can also use the

ncl_install

script to upgrade to 2.0 SP3 (see “Using the

Installation Script to Install the Novell Client” on page 2 for

more information).

1Launch the YaST Control Center.

GNOME: Click Computer > More Applications >

System > YaST.

KDE: Click the menu button > System > YaST.

Command Description

./ncl_install install

Installs the Novell Client for

Linux.

./ncl_install install

force

Forces the installation of all

Novell Client for Linux

packages.

./ncl_install upgrade

Upgrades the Novell Client for

Linux.

./ncl_install upgrade

force

Forces the upgrade of all Novell

Client for Linux packages.

./ncl_install

uninstall

Uninstalls all Novell Client for

Linux packages.

./ncl_install verify

Verifies the installation of all

installed Novell Client for Linux

packages.

./ncl_install

information

Displays summary information

for all installed Novell Client for

Linux packages.

./ncl_install files

Displays a list of all files

contained in the Novell Client for

Linux packages.

novdocx (en) 13 May 2009

2Click Software > Installation Source.

3Select the Novell Client 2.0 for Linux source, click

Delete, then click Yes.

4Click Finish.

5In the YaST Control Center, click Software > Add-on

Product.

6Select your Novell Client 2.0 SP3 for Linux installation

source (such as CD or Local Directory), then click

Next.

7Follow the on-screen instructions for the installation

source you specified in Step 6.

For example, you might be prompted to insert the

Novell Client for Linux CD, or to specify which local

directory contains a copy of the downloaded Novell

Client for Linux files.

8Select Yes, I Agree to the License Agreement, then

click Next.

If you see Dependency Conflict messages informing

you that the Novell Client cannot be installed because

of missing NICI and NMASTM dependencies:

8a Select Install novell-nmasclient although it would

change the architecture, then click OK– Try Again.

8b Select Install nici although it would change the

architecture, then click OK– Try Again.

9Select Patterns from the Filter drop-down list.

10 Make sure Novell Client for Linux is selected in the

Pattern list. It should already have a check mark in the

check box.

You should see all of the Novell Client for Linux

packages in the package summary list. All packages

should be selected for installation.

11 Select all the Novell Client for Linux packages that are

not selected.

12 Right-click the

novell-client

package in the

package summary list, then select All in This List >

Update if newer version available.

The icons to the left of the packages in the package

summary list change from a check mark to the update

symbol.

13 Click Accept to install all of the selected packages.

You will see all the packages being installed on the

Package Installation dialog box, followed by the

SuSEconfig dialog box.

14 Start the Novell Client for Linux.

See “Starting or Restarting the Novell Client for Linux”

on page 2.

If Novell Client 2.0 SP1 is installed on SLED 10 SP1 or

SLED 10 SP2 system and you upgrade your operating

system to SLED 10 SP3, then some undesired files and

directories are not removed. These files and directories

prevent users from logging into the system using the

Greeter screen as the Gnome Session Manager crashes.

You must login as root and run the following commands

either before or after an upgrade:

cd /home

rm -f `find . -name "ncl*.desktop" -print`

rmdir `find . -name "ncl*.desktop" -print`

cd /root

rm -f `find . -name "ncl*.desktop" -print`

rmdir `find . -name "ncl*.desktop" -print`

rm -f /etc/profile.d/novell-ncl-tray.sh

For NCL 2.0 SP1 running on SLED 10 SP3, the ncl_tray

does not autostart even after executing these commands.

However, it can be started manually. We recommend you to

upgrade to NCL 2.0 SP3.

UNINSTALLING THE NOVELL CLIENT FOR LINUX

Use either of the following methods to uninstall the Novell

Client for Linux:

“Using the YaST Control Center to Uninstall” on page 3

“Using the Installation Script to Uninstall” on page 4

Using the YaST Control Center to Uninstall

1Launch the YaST Control Center.

GNOME: Click Computer > More Applications >

System > YaST.

KDE: Click the menu button > System > YaST.

2Click Software in the left column, then click Software

Management in the right column.

3Select Patterns from the Filter drop-down list.

4Select Novell Client for Linux from the Additional

Software category to see the list of installed packages.

5Click the check box to the left of Novell Client for Linux

until a trash can appears.

This automatically selects all of the packages that

need to be deleted by changing their icons to a trash

can.

If any of the Novell Client for Linux package is not

automatically changed to the trash can, you must

change it manually.

6Right-click the

novell-client

package, select All in

This List, then click Delete.

7Click Accept to delete all of the selected packages.

YaST might display the following dependency conflict:

novdocx (en) 13 May 2009

product:Client_for_Linux-2.0.0.i686 has

missing dependencies

If YaST displays this dependency conflict, select delete

Client_for_Linux, then click OK - Try Again.

YaST displays the progress of the uninstall.

Using the Installation Script to Uninstall

To uninstall the Novell Client for Linux using the installation

script, enter

./ncl_install uninstall

in a terminal

window. You can run this command from the directory

where you unarchived the Client download file or from the

opt/novell/ncl/bin

directory. You must be logged in as

root to run this command.

Legal Notice

this publication may be reproduced, photocopied, stored on

a retrieval system, or transmitted without the express

written consent of the publisher. For a list of Novell

trademarks, see the Novell Trademark and Service Mark

list (http://www.novell.com/company/legal/trademarks/

tmlist.html). All third-party trademarks are the property of

their respective owners. A trademark symbol (®, TM, etc.)

denotes a Novell trademark; an asterisk (*) denotes a third-

party trademark.

Altri manuali per CLIENT FOR LINUX 2.0 SP3

Altri manuali Novell Software

Novell

Novell LINUX ENTERPRISE SERVER 10 SP3 - STORAGE ADMINISTRATION GUIDE... Manuale di istruzioni

Novell

Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ... Manuale utente

Novell

Novell IMANAGER 2.7.3 Manuale utente

Novell

Novell LINUX ENTERPRISE DESKTOP 10 - GNOME... Manuale utente

Novell

Novell ACCESS MANAGER 3.1 SP2 - README 2010 Manuale utente

Novell

Novell IDENTITY AUDIT 1.0 - GUIDE Manuale utente

Novell

Novell LINUX ENTERPRISE DESKTOP 10 SP2 Manuale utente

Novell

Novell OES 11 SP2 Manuale utente

Novell

Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE... Manuale utente

Novell

Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION... Manuale utente

Novell

Novell GROUPWISE 8 - RESOURCES Manuale utente

Novell

Novell LINUX ENTERPRISE DESKTOP 10 SP2 - GNOME... Manuale utente

Novell

Novell IDENTITY MANAGER 3.6.1 - NULL SERVICE AND LOOPBACK SERVICE... Manuale utente

Novell

Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0 - ... Manuale utente

Novell

Novell PRIVILEGED USER MANAGER EVALUATION - Manuale utente

Novell

Novell IDENTITY MANAGER DRIVER FOR ID PROVIDER 3.6.1 -... Manuale utente

Novell

Novell IDENTITY MANAGER 3.6.1 - STAGING BEST PRACTICES GUIDE... Manuale utente

Novell

Novell XDASV2 - ADMINISTRATION GUIDE V1 Manuale di istruzioni

Novell

Novell IDENTITY MANAGER 3.6.1 - UNDERSTANDING POLICIES... Manuale utente

Novell

Novell ACCESS MANAGER 3.1 SP2 - SSL VPN USER GUIDE... Manuale utente

Novell

Novell PLATESPIN ORCHESTRATE 2.0.2 - DEVELOPMENT CLIENT REFERENCE... Manuale di servizio

Novell

Novell SUPPORT ADVISOR 2.0.1 Manuale di istruzioni

Novell

Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 9.3 - ADMINISTRATION... Manuale utente

Novell

Novell CLIENT 1.0 FOR LINUX - README Manuale utente

Manuali Software popolari di altre marche

COMPRO

COMPRO COMPROFM Manuale utente

Muratec

Muratec OFFICEBRIDGE ONLINE Manuale utente

Oracle

Oracle Contact Center Anywhere 8.1 Manuale utente

Adobe

Adobe 65007312 - Photoshop Lightroom Manuale

Avaya

Avaya NULL One-X for RIM Blackberry Manuale utente

HP ProLiant BL420c Manuale utente

PS Audio

PS Audio PowerPlay Manuale del proprietario

Brady

Brady LOCKOUT PRO 3.0 Manuale di servizio

Avaya

Avaya Interaction Center Manuale utente

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuale

Oracle

Oracle Application 9i Manuale utente

Acer

Acer RDM Manuale utente

Canon

Canon Vixia HF21 Manuale utente

Canon

Canon ZR950 Manuale utente

Samsung

Samsung Auto Backup Manuale utente

Polycom

Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuale utente

Lexmark

Lexmark Apps Manuale di servizio