Nuu Splash Trail Plus Manuale utente
User Manual
2
Contents:
Getting Started .................................................................. 3
Waterproof & Dustproof Performance ................................. 14
Specications ..................................................................... 15
Troubleshooting ................................................................. 16
Contact Support ................................................................. 18
Warnings ............................................................................ 19
FCC Information .................................................................... 22
Warranty Information ........................................................ 24
GETTING STARTED
On/O Switch
Charging Indicator
Action Button
Volume Up
Volume Down
3.5mm AUX-IN
Micro-USB Charging Port
3
GETTING STARTED
On/O Switch
Charging Indicator
Action Button
Volume Up
Volume Down
3.5mm AUX-IN
Micro-USB Charging Port
a
b
c
d
e
f
g
h
In the Box
• NUU Splash Trail Plus
• Micro USB power charging cable
i
• 3.5mm to 3.5mm audio cable
• User Manual
Status Light
Built-in Microphone
Previous Track
Next Track
j
k
a
c
f
bh
g
e
d
ikj
4
On/O Switch
On: Slide the switch to the left to turn the NUU Splash on. When powered on, the Splash says“Power On!”to indicate this.
O: Slide the switch to the right to turn the NUU Splash o. When powered o.
NOTE: Do not ip the power switch on/o rapidly. Wait for the sound before moving the switch again.
Bluetooth Status Light
This is a small light above the Action Button that illuminates to show the current status of the Splash’s Bluetooth connection.
• (Blue)Flashing Slowly: The Splash is on and is not in pairing mode. This is also the indicator for“auto-reconnect”, where the
Splash attempts to connect with the last paired Bluetooth device immediately after it is powered on.
• (Blue)Flashing Quickly: Pairing mode (you will hear the word“Waiting for connection”from the Splash)
• (Blue)Solidly Lit: Paired and connected.
a
b
5
Action Button
The Action button controls:
• Switching Modes • FM auto-scanning • Bluetooth pairing
• Play/Pause • Re-connect • Mute/Unmute
TO SWITCH BETWEEN BLUETOOTH, FM, AND LINE-IN MODES:
Every time you power on your Splash, it starts in Bluetooth mode. Use the Action button to switch to FM and Line-in modes.
1. Power on the Splash
c
• (Green)Flashing Slowly: FM Mode active.
• (Green)Flashing Quickly: FM automatic channel scan in progress.
• (Green)Solidly Lit: Line-in mode active.
6
2. Wait for the Splash to fully enter Bluetooth mode. You will hear either“Bluetooth connected”if you previously connected a phone to
your Splash, OR you will hear“Waiting for connection”if you did not. When you hear one of those phrases, you may go to step #3.
3. Press and HOLD the Action button to switch to the next mode in sequence
4. After switching to a new mode, you must release and then press and HOLD the Action button to go to the next mode
5. You will hear“Radio”when the Splash switches to FM Radio mode
6. You will hear“Line-in”when the Splash switches to Line-in mode
7. You will hear“Bluetooth”when the Splash switches to Bluetooth mode
TO SCAN FOR FM STATIONS:
1. Switch to FM Radio mode as above. You will hear either static or an FM station
2. Adjust the volume as needed, using the volume +/- buttons
7
3. Click the Action button one time. The Splash will then scan the FM band for stations it can receive
TO START BLUETOOTH PAIRING:
1. Power on the Splash
2. The Splash will say“Power On”, then“Bluetooth”, and“Waiting for connection”
3. When you hear“Waiting for connection”, the Splash is in pairing mode and can be found by nearby devices
4. If your Splash is already paired with a device and you want to pair it to a dierent device, double-click the Action button .
You will hear“Waiting for connection”as in Step #3
TO PAIR THE SPLASH WITH YOUR BLUETOOTH DEVICE:
1. Enter Bluetooth pairing mode as above
2. Enable Bluetooth on your phone or other device, then select“NUU Splash”from the list of discoverable devices
8
3. If prompted for a PIN code, enter“0000”(4 zeros)
4. It will take between 10-15 seconds for the Splash to pair with your device. When pairing is successful, you will hear the Splash
say“Bluetooth connected!”and the Bluetooth status light will remain steadily lit
NOTE: Procedures for activating Bluetooth will vary across devices. Consult the documentation that came with your phone or other device
for further information.
PLAY/PAUSE (in Bluetooth mode):
While paired, the Action button controls the play/pause functions. Click the Action button once to pause, click it again to resume playback.
RECONNECT (in Bluetooth mode):
If the Splash was previously paired with a device but has not reconnected to that device, you can click the Action button once to start a
re-connection attempt. Usually this is not necessary, but you may need to do this if your device goes out of range of the Splash and comes
back into range later.
9
MUTE (in Line-in mode):
While in Line-in mode, clicking the Action button once mutes the sound. Clicking it again un-mutes the sound.
Volume Up Volume Down
CONTROLLING VOLUME
Press or hold the volume keys / to adjust the volume. When you reach maximum volume, the Splash will say
“Maximum volume!”. There is no voice prompt for minimum volume.
3.5mm AUX-IN – Plug & Play
The Splash can connect to any device with a 3.5mm headphone jack. Use the supplied 3.5mm input cable to plug and play, no Bluetooth
required. You must rst switch to Line-in mode in order to hear playback.
NOTE: Accessories supplied do not meet waterproof and dustproof specications.
de
f
10
Micro-USB Charging Port
CHARGING THE SPLASH’S BATTERY:
For best results, ensure the Splash is fully charged before use.
Connect the supplied Micro-USB cable into the charging port , and plug the USB side into your computer or a USB AC adapter (adapter
not supplied). The red charging indicator will remain illuminated while the Splash is charging. The indicator will go dark when the unit is
fully charged. The indicator ashes red when the battery is low. Allow 2.5 hours for the battery to fully charge.The Splash may be used
while it is charging.
NOTE: If you intend to use the Splash while charging, audio output quality may suer during playback while charging via computer.
Charging Indicator
A ashing red light indicates that the battery is low and should be recharged soon.When charging, this light shows red until the Splash is
fully charged, at which point it goes dark.
g
h
Indice
Altri manuali Nuu Altoparlanti
