NXP Semiconductors PN7120 Manuale utente

AN11646

PN7120 NFC Controller SBC Kit Quick Start Guide

Rev. 1.3 — 20 May 2016

319713

Application note

COMPANY PUBLIC

Document information

Info

Content

Keywords

OM5577, PN7120, Raspberry Pi, BeagleBone, NFC, P2P, Card

Emulation, Linux, Android, Win10 IoT

Abstract

This document gives a description on how to get started with the PN7120

NFC Controller SBC Kit.

NXP Semiconductors

AN11646

PN7120 NFC Controller SBC Kit Quick Start Guide

AN11646

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.3 — 20 May 2016

319713

2 of 21

Contact information

For more information, please visit:

http://www.nxp.com

Revision history

Rev

Date

Description

1.3

20160520

Adding details about Beaglebone startup

1.2

20151009

- Information about Win10 IoT demo added

- Section 6.3 Licenses updated

1.1

20150701

- Correction of a syntax error in a referenced link

- Explicitly point to the demo images

1.0

20150601

First release

NXP Semiconductors

AN11646

PN7120 NFC Controller SBC Kit Quick Start Guide

AN11646

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.3 — 20 May 2016

319713

3 of 21

1. Introduction

This document gives a description on how to get started with the PN7120 NFC-Controller

SBC Kit. This document provides a step by step guide to the installation procedure of the

hardware and the software. Finally it shows PN7120 NFC Controller functionalities

through demonstration application.

1.1 OM5577/PN7120S demo kit

OM5577/PN7120S kit is a high performance fully NFC compliant expansion board for

both Raspberry Pi (refer to [1] for more details) and BeagleBone (refer to [2] for more

details). It meets compliance with Reader mode, P2P mode and Card emulation mode

standards. The board features an integrated high performance RF antenna to insure high

interoperability level with NFC devices.

The kit is composed of 3 printed circuit boards and a MIFARE Ultralight EV1 card.

Fig 1. PN7120 NFC Controller SBC Kit content

NXP Semiconductors

AN11646

PN7120 NFC Controller SBC Kit Quick Start Guide

AN11646

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.3 — 20 May 2016

319713

4 of 21

1.2 Linux driver support

PN7120 NFC Controller is supported under GNU/Linux system using the NXP Linux

libnfc-nci software stack (for more details, refer to AN11697 available on PN7120

Product Web Page [5]). The Raspberry Pi and BeagleBone Linux demo images include

the complete stack (Kernel mode driver, User mode library and demo application)

allowing to demonstrate the NFC functionalities offered by the PN7120.

1.3 Android driver support

PN7120 NFC Controller is supported from the official Android Open Source Project (refer

to [7] for more details) with the addition of dedicated patches available through PN7120

Product Web Page [5] (refer to AN11690).

The BeagleBone Black demo image is based on this concept.

1.4 Windows IoT driver support

PN7120 NFC Controller is natively supported as Proximity platform device by Win10 IoT

OS through the universal NFC device driver model, more details can be found in relative

pages on Microsoft website (refer to [8]). For instructions on how to install this driver refer

to AN11767 available through PN7120 Product Web Page [5].

The Win10 IoT Raspberry Pi 2 demo image is based on this concept.

NXP Semiconductors

AN11646

PN7120 NFC Controller SBC Kit Quick Start Guide

AN11646

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.3 — 20 May 2016

319713

5 of 21

2. Quick Startup on Raspberry Pi

2.1 Required items

• Raspberry Pi (Win10IoT demo only support Raspberry Pi Model 2) [1]

• Compatible SD or MicroSD card (depending of the Raspberry Pi model) of at least 4Gb

(8Gb for Win10IoT demo) memory size [3]

• Micro USB power supply (5V / 1A) [4]

• USB Keyboard (useless for Win10IoT demo)

• USB Mouse (useless for Win10IoT demo)

• HDMI cable to connect to a Monitor / TV

• Computer (running Windows, Linux or Mac OS X) for SD/MicroSD card installation

• Raspberry Pi demo image file, downloaded from the OM5577/PN7120S demo kit

webpage [6]

2.2 Hardware setup

First of all assemble the PN7120 NFC Controller Board with the Raspberry Pi Interface

Board.

Fig 2. OM5577/PN7120S Raspberry Pi configuration

Then stacked together the boards with the Raspberry Pi according to below guidelines.

NXP Semiconductors

AN11646

PN7120 NFC Controller SBC Kit Quick Start Guide

AN11646

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.3 — 20 May 2016

319713

6 of 21

2.2.1 Raspberry Pi A/B (old models)

On the old models, the Raspberry Pi Interface Board connector fit perfectly the

Raspberry Pi one. Assemble the boards as shown in figure below, removing first the 4

white plastic spacers:

Fig 3. OM5577/PN7120S and Raspberry Pi B model stacked together

2.2.2 Raspberry Pi A+/B+ and Raspberry Pi 2 (new models)

The Raspberry Pi new models have a 40-pin connector allowing to connect an expansion

board. The Raspberry Pi Interface Board only make use of the first 26 ones for

compatibility reason with the previous Raspberry Pi models. Assemble the boards as

shown in figure below:

Fig 4. OM5577/PN7120S and Raspberry Pi B+ model stacked together

2.3 Software setup

Prepare a SD or MicroSD card, with the downloaded Raspberry Pi demo image

(http://www.nxp.com/documents/software/OM5577_Rbi.html or

www.nxp.com/redirect/nxp.box.com/OM5577-PN7120S-Rpi-Win10IoT), following the

installation guidelines:

- On Windows:

www.nxp.com/redirect/raspberrypi.org/documentation/installation/installing-

images/windows.md

NXP Semiconductors

AN11646

PN7120 NFC Controller SBC Kit Quick Start Guide

AN11646

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.3 — 20 May 2016

319713

7 of 21

- On Linux:

www.nxp.com/redirect/raspberrypi.org/documentation/installation/installing-

images/linux.md

- On MAC OS X: www.nxp.com/redirect/learn.adafruit.com/beaglebone-black-

installing-operating-systems/mac-os-x.md

2.4 Starting NFC demo

2.4.1 Linux image

Insert the SD or MicroSD card in the Raspberry Pi. Connect HDMI Display, mouse and

keyboard. Then power-up the Raspberry Pi by plugging the USB power cable.

The Raspberry Pi boots and displays the Raspbian GUI:

Fig 5. Raspbian GUI

Open a terminal and browse to the Linux libnfc-nci stack directory (refer to chapter 1.2 for

more details about the Linux NFC software stack).

$ cd ~/linux_libnfc-nci

Refer to chapter 4 for the following procedure.

NXP Semiconductors

AN11646

PN7120 NFC Controller SBC Kit Quick Start Guide

AN11646

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.3 — 20 May 2016

319713

8 of 21

2.4.2 Win10 IoT image

Insert the SD or MicroSD card in the Raspberry Pi 2, connect HDMI Display, and then

power-up the Raspberry Pi by plugging the USB power cable.

The Raspberry Pi boots and displays the “Proximity_BasicTest” application for

demonstration of NFC functionality.

The application consists of a simple graphical interface, displayed on the HDMI output of

the Raspberry Pi. It will react when NFC devices or tags are made proximate to the

PN7120 antenna by displaying short messages:

Fig 6. Proximity_BasicTest application

NXP Semiconductors

AN11646

PN7120 NFC Controller SBC Kit Quick Start Guide

AN11646

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.3 — 20 May 2016

319713

9 of 21

3. Quick Startup on BeagleBone

3.1 Required items

• BeagleBone Black [2]

• MicroSD card of at least 4 Gb (8 Gb for Android)

• 5V adapter or micro USB cable to power the BeagleBone

• USB Keyboard

• USB Mouse

• USB Hub to connect both Mouse and Keyboard to the BeagleBone

• HDMI cable to connect to a Monitor / TV

• Computer (running Windows, Linux or Mac OS X) for MicroSD card installation

• BeagleBone image file, downloaded from the OM5577/PN7120S demo kit webpage [6]

3.2 Hardware setup

First of all assemble the PN7120 NFC Controller Board with the BeagleBone Interface

Board.

Fig 7. OM5577/PN7120S BeagleBone configuration

Then stacked together the boards with the BeagleBone.

NXP Semiconductors

AN11646

PN7120 NFC Controller SBC Kit Quick Start Guide

AN11646

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.3 — 20 May 2016

319713

10 of 21

Fig 8. OM5577/PN7120S and BeagleBone Black stacked together

3.3 Software setup

Prepare a MicroSD card, with the downloaded BeagleBone demo image

(http://www.nxp.com/documents/software/OM5577_BBB_Linux.html or

http://www.nxp.com/documents/software/OM5577_BBB_Kitkat.html), following the

installation guidelines. First extract the “.img” file from the archive, then flash it on the

microSD card according to below guidelines.

3.3.1 On Windows

Insert the MicroSD card into your computer (note the device drive letter), and using

Win32 Disk Imager, write the image into it:

Fig 9. Win32 Disk Imager

Indice

Altri manuali NXP Semiconductors Controllori

NXP Semiconductors

NXP Semiconductors MC9328MX1 Manuale

NXP Semiconductors

NXP Semiconductors LPC2917 Manuale di istruzioni

NXP Semiconductors

NXP Semiconductors freescale 56F8014 Manuale utente

NXP Semiconductors

NXP Semiconductors MPC560xP Guida

NXP Semiconductors

NXP Semiconductors LPC1311 Manuale utente

NXP Semiconductors

NXP Semiconductors PCA9665 Manuale operativo

NXP Semiconductors

NXP Semiconductors PN7150 Manuale utente

NXP Semiconductors

NXP Semiconductors MPC560xB Manuale utente

NXP Semiconductors

NXP Semiconductors PN7150 Manuale utente

NXP Semiconductors

NXP Semiconductors MC9S12ZVH64 Manuale utente

NXP Semiconductors

NXP Semiconductors PN7150X Manuale utente

NXP Semiconductors

NXP Semiconductors MC13224V Manuale utente

NXP Semiconductors

NXP Semiconductors OM5579 Manuale utente

NXP Semiconductors

NXP Semiconductors LPC1768 Manuale utente

NXP Semiconductors

NXP Semiconductors UM10204 Manuale utente

NXP Semiconductors

NXP Semiconductors MPC5644A Manuale utente

NXP Semiconductors

NXP Semiconductors 56F803 Manuale utente

NXP Semiconductors

NXP Semiconductors PD3DB1548 PD3.0 type-C Manuale utente

NXP Semiconductors

NXP Semiconductors TWR-VF65GS10-PRO Manuale utente

NXP Semiconductors

NXP Semiconductors OM5577 Manuale utente

NXP Semiconductors

NXP Semiconductors 56800E Manuale utente

NXP Semiconductors

NXP Semiconductors TWR-K60N512 Manuale utente

NXP Semiconductors

NXP Semiconductors MK30DX64VMC7 Manuale utente

NXP Semiconductors

NXP Semiconductors PXN2020 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente