NXP Semiconductors MC68HC16Z1 Manuale utente

Order this document by

MC68HC16ZUM/AD

NON-DISCLOSURE AGREEMENT REQUIRED

M68HC16Z Series

MC68HC16Z1

MC68CK16Z1

MC68CM16Z1

MC68HC16Z2

MC68HC16Z3

MC68HC16Z4

MC68CK16Z4

User’s Manual

HC16

Freescale Semiconductor, I

nc...

Freescale Semiconductor

NON-DISCLOSURE AGREEMENT REQUIRED

User’s Manual

User’s Manual M68HC16Z Series

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

Information in this document is provided solely to enable system and software

implementers to use Freescale Semiconductor products. There are no express or

implied copyright licenses granted hereunder to design or fabricate any integrated

circuits or integrated circuits based on the information in this document.

Freescale Semiconductor reserves the right to make changes without further notice to

any products herein. Freescale Semiconductor makes no warranty, representation or

guarantee regarding the suitability of its products for any particular purpose, nor does

Freescale Semiconductor assume any liability arising out of the application or use of

any product or circuit, and specifically disclaims any and all liability, including without

limitation consequential or incidental damages. “Typical” parameters which may be

provided in Freescale Semiconductor data sheets and/or specifications can and do

vary in different applications and actual performance may vary over time. All operating

parameters, including “Typicals” must be validated for each customer application by

customer’s technical experts. Freescale Semiconductor does not convey any license

under its patent rights nor the rights of others. Freescale Semiconductor products are

not designed, intended, or authorized for use as components in systems intended for

surgical implant into the body, or other applications intended to support or sustain life,

or for any other application in which the failure of the Freescale Semiconductor product

could create a situation where personal injury or death may occur. Should Buyer

purchase or use Freescale Semiconductor products for any such unintended or

unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor

and its officers, employees, subsidiaries, affiliates, and distributors harmless against all

claims, costs, damages, and expenses, and reasonable attorney fees arising out of,

directly or indirectly, any claim of personal injury or death associated with such

unintended or unauthorized use, even if such claim alleges that Freescale

Semiconductor was negligent regarding the design or manufacture of the part.

How to Reach Us:

Home Page:

www.freescale.com

E-mail:

[email protected]

USA/Europe or Locations Not Listed:

Freescale Semiconductor

Technical Information Center, CH370

1300 N. Alma School Road

Chandler, Arizona 85224

+1-800-521-6274 or +1-480-768-2130

[email protected]

Europe, Middle East, and Africa:

Freescale Halbleiter Deutschland GmbH

Technical Information Center

Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English)

+46 8 52200080 (English)

+49 89 92103 559 (German)

+33 1 69 35 48 48 (French)

[email protected]

Japan:

Freescale Semiconductor Japan Ltd.

Headquarters

ARCO Tower 15F

1-8-1, Shimo-Meguro, Meguro-ku,

Tokyo 153-0064

Japan

0120 191014 or +81 3 5437 9125

[email protected]

Asia/Pacific:

Freescale Semiconductor Hong Kong Ltd.

Technical Information Center

2 Dai King Street

Tai Po Industrial Estate

Tai Po, N.T., Hong Kong

+800 2666 8080

[email protected]

For Literature Requests Only:

Freescale Semiconductor Literature Distribution Center

P.O. Box 5405

Denver, Colorado 80217

1-800-441-2447 or 303-675-2140

Fax: 303-675-2150

[email protected]

M68HC16 Z SERIES

USER’S MANUAL

Paragraph Title Page

TABLE OF CONTENTS

SECTION 1

INTRODUCTION

SECTION 2

NOMENCLATURE

2.1 Symbols and Operators .............................................................................2-1

2.2 CPU16 Register Mnemonics .....................................................................2-2

2.3 Register Mnemonics ..................................................................................2-3

2.4 Conventions ..............................................................................................2-6

SECTION 3

OVERVIEW

3.1 M68HC16 Z-Series MCU Features ...........................................................3-1

3.1.1 Central Processor Unit (CPU16/CPU16L) .........................................3-1

3.1.2 System Integration Module (SIM/SIML) ............................................3-1

3.1.3 Standby RAM (SRAM) ......................................................................3-1

3.1.4 Masked ROM Module (MRM) — (MC68HC16Z2/Z3 Only) ...............3-2

3.1.5 Analog-to-Digital Converter (ADC) ....................................................3-2

3.1.6 Queued Serial Module (QSM) ...........................................................3-2

3.1.7 Multichannel Communication Interface (MCCI) —

(MC68HC16Z4/CKZ4 Only) ..............................................................3-2

3.1.8 General-Purpose Timer (GPT) ..........................................................3-2

3.2 Intermodule Bus ........................................................................................3-2

3.3 System Block Diagram and Pin Assignment Diagrams .............................3-2

3.4 Pin Descriptions ......................................................................................3-11

3.5 Signal Descriptions ..................................................................................3-13

3.6 Internal Register Map ..............................................................................3-16

3.7 Address Space Maps ..............................................................................3-19

SECTION 4

CENTRAL PROCESSOR UNIT

4.1 General ......................................................................................................4-1

4.2 Register Model ..........................................................................................4-1

4.2.1 Accumulators .....................................................................................4-3

4.2.2 Index Registers .................................................................................4-3

4.2.3 Stack Pointer .....................................................................................4-3

4.2.4 Program Counter ...............................................................................4-3

4.2.5 Condition Code Register ...................................................................4-4

4.2.6 Address Extension Register and Address Extension Fields .............4-5

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

M68HC16 Z SERIES

USER’S MANUAL

(Continued)

Paragraph Title Page

TABLE OF CONTENTS

4.2.7 Multiply and Accumulate Registers ...................................................4-5

4.3 Memory Management ...............................................................................4-5

4.3.1 Address Extension ............................................................................4-6

4.3.2 Extension Fields ................................................................................4-6

4.4 Data Types ................................................................................................4-6

4.5 Memory Organization ................................................................................4-7

4.6 Addressing Modes .....................................................................................4-8

4.6.1 Immediate Addressing Modes ...........................................................4-9

4.6.2 Extended Addressing Modes ..........................................................4-10

4.6.3 Indexed Addressing Modes .............................................................4-10

4.6.4 Inherent Addressing Mode ..............................................................4-10

4.6.5 Accumulator Offset Addressing Mode .............................................4-10

4.6.6 Relative Addressing Modes .............................................................4-10

4.6.7 Post-Modified Index Addressing Mode ............................................4-10

4.6.8 Use of CPU16 Indexed Mode to Replace M68HC11 Direct Mode ..4-11

4.7 Instruction Set .........................................................................................4-11

4.7.1 Instruction Set Summary .................................................................4-11

4.8 Comparison of CPU16 and M68HC11 CPU Instruction Sets ..................4-31

4.9 Instruction Format ...................................................................................4-33

4.10 Execution Model ......................................................................................4-34

4.10.1 Microsequencer ...............................................................................4-35

4.10.2 Instruction Pipeline ..........................................................................4-35

4.10.3 Execution Unit .................................................................................4-35

4.11 Execution Process ...................................................................................4-36

4.11.1 Changes in Program Flow ...............................................................4-36

4.12 Instruction Timing ....................................................................................4-36

4.13 Exceptions ...............................................................................................4-37

4.13.1 Exception Vectors ...........................................................................4-37

4.13.2 Exception Stack Frame ...................................................................4-38

4.13.3 Exception Processing Sequence .....................................................4-39

4.13.4 Types of Exceptions ........................................................................4-39

4.13.4.1 Asynchronous Exceptions .......................................................4-39

4.13.4.2 Synchronous Exceptions .........................................................4-39

4.13.5 Multiple Exceptions .........................................................................4-40

4.13.6 RTI Instruction .................................................................................4-40

4.14 Development Support ..............................................................................4-40

4.14.1 Deterministic Opcode Tracking .......................................................4-40

4.14.1.1 IPIPE0/IPIPE1 Multiplexing .....................................................4-41

4.14.1.2 Combining Opcode Tracking with Other Capabilities ..............4-41

4.14.2 Breakpoints .....................................................................................4-41

4.14.3 Opcode Tracking and Breakpoints ..................................................4-42

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

M68HC16 Z SERIES

USER’S MANUAL

(Continued)

Paragraph Title Page

TABLE OF CONTENTS

4.14.4 Background Debug Mode ................................................................4-42

4.14.4.1 Enabling BDM .........................................................................4-42

4.14.4.2 BDM Sources ..........................................................................4-42

4.14.4.3 Entering BDM ..........................................................................4-42

4.14.4.4 BDM Commands .....................................................................4-43

4.14.4.5 Returning from BDM ...............................................................4-43

4.14.4.6 BDM Serial Interface ...............................................................4-44

4.15 Recommended BDM Connection ............................................................4-45

4.16 Digital Signal Processing .........................................................................4-45

SECTION 5

SYSTEM INTEGRATION MODULE

5.1 General ......................................................................................................5-1

5.2 System Configuration ................................................................................5-2

5.2.1 Module Mapping ................................................................................5-2

5.2.2 Interrupt Arbitration ............................................................................5-3

5.2.3 Show Internal Cycles .........................................................................5-3

5.2.4 Register Access ................................................................................5-3

5.2.5 Freeze Operation ..............................................................................5-3

5.3 System Clock ............................................................................................5-4

5.3.1 Clock Sources ...................................................................................5-5

5.3.2 Clock Synthesizer Operation .............................................................5-6

5.3.3 External Bus Clock ..........................................................................5-21

5.3.4 Low-Power Operation ......................................................................5-21

5.4 System Protection ...................................................................................5-24

5.4.1 Reset Status ....................................................................................5-24

5.4.2 Bus Monitor .....................................................................................5-24

5.4.3 Halt Monitor .....................................................................................5-25

5.4.4 Spurious Interrupt Monitor ...............................................................5-25

5.4.5 Software Watchdog .........................................................................5-25

5.4.6 Periodic Interrupt Timer ...................................................................5-27

5.4.7 Interrupt Priority and Vectoring ........................................................5-28

5.4.8 Low-Power STOP Operation ...........................................................5-29

5.5 External Bus Interface .............................................................................5-29

5.5.1 Bus Control Signals .........................................................................5-31

5.5.1.1 Address Bus ............................................................................5-31

5.5.1.2 Address Strobe .......................................................................5-31

5.5.1.3 Data Bus .................................................................................5-31

5.5.1.4 Data Strobe .............................................................................5-31

5.5.1.5 Read/Write Signal ...................................................................5-32

5.5.1.6 Size Signals ............................................................................5-32

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

M68HC16 Z SERIES

USER’S MANUAL

(Continued)

Paragraph Title Page

TABLE OF CONTENTS

5.5.1.7 Function Codes .......................................................................5-32

5.5.1.8 Data Size Acknowledge Signals .............................................5-32

5.5.1.9 Bus Error Signal ......................................................................5-33

5.5.1.10 Halt Signal ...............................................................................5-33

5.5.1.11 Autovector Signal ....................................................................5-33

5.5.2 Dynamic Bus Sizing ........................................................................5-33

5.5.3 Operand Alignment .........................................................................5-35

5.5.4 Misaligned Operands ......................................................................5-35

5.5.5 Operand Transfer Cases .................................................................5-35

5.6 Bus Operation .........................................................................................5-36

5.6.1 Synchronization to CLKOUT ...........................................................5-36

5.6.2 Regular Bus Cycle ...........................................................................5-37

5.6.2.1 Read Cycle ..............................................................................5-37

5.6.2.2 Write Cycle ..............................................................................5-38

5.6.3 Fast Termination Cycles ..................................................................5-39

5.6.4 CPU Space Cycles ..........................................................................5-40

5.6.4.1 Breakpoint Acknowledge Cycle ...............................................5-41

5.6.4.2 LPSTOP Broadcast Cycle .......................................................5-42

5.6.5 Bus Exception Control Cycles .........................................................5-43

5.6.5.1 Bus Errors ...............................................................................5-44

5.6.5.2 Double Bus Faults ...................................................................5-45

5.6.5.3 Halt Operation .........................................................................5-45

5.6.6 External Bus Arbitration ...................................................................5-46

5.6.6.1 Show Cycles ...........................................................................5-47

5.7 Reset .......................................................................................................5-48

5.7.1 Reset Exception Processing ...........................................................5-48

5.7.2 Reset Control Logic .........................................................................5-48

5.7.3 Reset Mode Selection .....................................................................5-49

5.7.3.1 Data Bus Mode Selection ........................................................5-50

5.7.3.2 Clock Mode Selection .............................................................5-52

5.7.3.3 Breakpoint Mode Selection .....................................................5-52

5.7.4 MCU Module Pin Function During Reset ........................................5-52

5.7.5 Pin State During Reset ....................................................................5-53

5.7.5.1 Reset States of SIM Pins ........................................................5-54

5.7.5.2 Reset States of Pins Assigned to Other MCU Modules ..........5-54

5.7.6 Reset Timing ...................................................................................5-55

5.7.7 Power-On Reset ..............................................................................5-55

5.7.8 Use of the Three-State Control Pin .................................................5-56

5.7.9 Reset Processing Summary ............................................................5-57

5.7.10 Reset Status Register .....................................................................5-57

5.8 Interrupts .................................................................................................5-58

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

M68HC16 Z SERIES

USER’S MANUAL

(Continued)

Paragraph Title Page

TABLE OF CONTENTS

5.8.1 Interrupt Exception Processing .......................................................5-58

5.8.2 Interrupt Priority and Recognition ....................................................5-58

5.8.3 Interrupt Acknowledge and Arbitration ............................................5-59

5.8.4 Interrupt Processing Summary ........................................................5-60

5.8.5 Interrupt Acknowledge Bus Cycles ..................................................5-61

5.9 Chip-Selects ............................................................................................5-61

5.9.1 Chip-Select Registers ......................................................................5-63

5.9.1.1 Chip-Select Pin Assignment Registers ...................................5-64

5.9.1.2 Chip-Select Base Address Registers ......................................5-65

5.9.1.3 Chip-Select Option Registers ..................................................5-66

5.9.1.4 PORTC Data Register .............................................................5-67

5.9.2 Chip-Select Operation .....................................................................5-67

5.9.3 Using Chip-Select Signals for Interrupt Acknowledge .....................5-68

5.9.4 Chip-Select Reset Operation ...........................................................5-69

5.10 Parallel Input/Output Ports ......................................................................5-70

5.10.1 Pin Assignment Registers ...............................................................5-70

5.10.2 Data Direction Registers .................................................................5-70

5.10.3 Data Registers .................................................................................5-71

5.11 Factory Test ............................................................................................5-71

SECTION 6

STANDBY RAM MODULE

6.1 SRAM Register Block ................................................................................6-1

6.2 SRAM Array Address Mapping .................................................................6-2

6.3 SRAM Array Address Space Type ............................................................6-2

6.4 Normal Access ..........................................................................................6-2

6.5 Standby and Low-Power Stop Operation ..................................................6-2

6.6 Reset .........................................................................................................6-3

SECTION 7

MASKED ROM MODULE

7.1 MRM Register Block ..................................................................................7-1

7.2 MRM Array Address Mapping ...................................................................7-1

7.3 MRM Array Address Space Type ..............................................................7-2

7.4 Normal Access ..........................................................................................7-2

7.5 Low-Power Stop Mode Operation .............................................................7-3

7.6 ROM Signature ..........................................................................................7-3

7.7 Reset .........................................................................................................7-3

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

M68HC16 Z SERIES

USER’S MANUAL

(Continued)

Paragraph Title Page

TABLE OF CONTENTS

SECTION 8

ANALOG-TO-DIGITAL CONVERTER

8.1 General ......................................................................................................8-1

8.2 External Connections ................................................................................8-1

8.2.1 Analog Input Pins ..............................................................................8-2

8.2.2 Analog Reference Pins ......................................................................8-3

8.2.3 Analog Supply Pins ...........................................................................8-3

8.3 Programmer’s Model .................................................................................8-3

8.4 ADC Bus Interface Unit .............................................................................8-3

8.5 Special Operating Modes ..........................................................................8-3

8.5.1 Low-Power Stop Mode ......................................................................8-3

8.5.2 Freeze Mode .....................................................................................8-4

8.6 Analog Subsystem ....................................................................................8-4

8.6.1 Multiplexer .........................................................................................8-4

8.6.2 Sample Capacitor and Buffer Amplifier .............................................8-5

8.6.3 RC DAC Array ...................................................................................8-5

8.6.4 Comparator .......................................................................................8-6

8.7 Digital Control Subsystem .........................................................................8-6

8.7.1 Control/Status Registers ...................................................................8-6

8.7.2 Clock and Prescaler Control ..............................................................8-6

8.7.3 Sample Time .....................................................................................8-7

8.7.4 Resolution .........................................................................................8-7

8.7.5 Conversion Control Logic ..................................................................8-7

8.7.5.1 Conversion Parameters ............................................................8-8

8.7.5.2 Conversion Modes ....................................................................8-8

8.7.6 Conversion Timing ..........................................................................8-12

8.7.7 Successive Approximation Register ................................................8-13

8.7.8 Result Registers ..............................................................................8-13

8.8 Pin Considerations ..................................................................................8-14

8.8.1 Analog Reference Pins ....................................................................8-14

8.8.2 Analog Power Pins ..........................................................................8-14

8.8.3 Analog Supply Filtering and Grounding ...........................................8-16

8.8.4 Accommodating Positive/Negative Stress Conditions .....................8-18

8.8.5 Analog Input Considerations ...........................................................8-19

8.8.6 Analog Input Pins ............................................................................8-21

8.8.6.1 Settling Time for the External Circuit .......................................8-22

8.8.6.2 Error Resulting from Leakage .................................................8-23

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

M68HC16 Z SERIES

USER’S MANUAL

(Continued)

Paragraph Title Page

TABLE OF CONTENTS

SECTION 9

QUEUED SERIAL MODULE

9.1 General ......................................................................................................9-1

9.2 QSM Registers and Address Map .............................................................9-2

9.2.1 QSM Global Registers .......................................................................9-2

9.2.1.1 Low-Power Stop Mode Operation .............................................9-2

9.2.1.2 Freeze Operation ......................................................................9-3

9.2.1.3 QSM Interrupts ..........................................................................9-3

9.2.2 QSM Pin Control Registers ...............................................................9-4

9.3 Queued Serial Peripheral Interface ...........................................................9-5

9.3.1 QSPI Registers ..................................................................................9-6

9.3.1.1 Control Registers ......................................................................9-6

9.3.1.2 Status Register ..........................................................................9-7

9.3.2 QSPI RAM .........................................................................................9-7

9.3.2.1 Receive RAM ............................................................................9-7

9.3.2.2 Transmit RAM ...........................................................................9-7

9.3.2.3 Command RAM .........................................................................9-8

9.3.3 QSPI Pins ..........................................................................................9-8

9.3.4 QSPI Operation .................................................................................9-8

9.3.5 QSPI Operating Modes .....................................................................9-9

9.3.5.1 Master Mode ...........................................................................9-16

9.3.5.2 Master Wrap-Around Mode .....................................................9-19

9.3.5.3 Slave Mode .............................................................................9-20

9.3.5.4 Slave Wrap-Around Mode .......................................................9-21

9.3.6 Peripheral Chip Selects ...................................................................9-21

9.4 Serial Communication Interface ..............................................................9-21

9.4.1 SCI Registers ..................................................................................9-24

9.4.1.1 Control Registers ....................................................................9-24

9.4.1.2 Status Register ........................................................................9-24

9.4.1.3 Data Register ..........................................................................9-24

9.4.2 SCI Pins ..........................................................................................9-25

9.4.3 SCI Operation ..................................................................................9-25

9.4.3.1 Definition of Terms ..................................................................9-25

9.4.3.2 Serial Formats .........................................................................9-25

9.4.3.3 Baud Clock ..............................................................................9-26

9.4.3.4 Parity Checking .......................................................................9-26

9.4.3.5 Transmitter Operation .............................................................9-27

9.4.3.6 Receiver Operation .................................................................9-28

9.4.3.7 Idle-Line Detection ..................................................................9-29

9.4.3.8 Receiver Wake-Up ..................................................................9-29

9.4.3.9 Internal Loop Mode .................................................................9-30

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

M68HC16 Z SERIES

USER’S MANUAL

(Continued)

Paragraph Title Page

TABLE OF CONTENTS

SECTION 10

MULTICHANNEL COMMUNICATION INTERFACE

10.1 General ....................................................................................................10-1

10.2 MCCI Registers and Address Map ..........................................................10-2

10.2.1 MCCI Global Registers ....................................................................10-2

10.2.1.1 Low-Power Stop Mode ............................................................10-2

10.2.1.2 Privilege Levels .......................................................................10-3

10.2.1.3 MCCI Interrupts .......................................................................10-3

10.2.2 Pin Control and General-Purpose I/O .............................................10-4

10.3 Serial Peripheral Interface (SPI) ..............................................................10-4

10.3.1 SPI Registers ..................................................................................10-6

10.3.1.1 SPI Control Register (SPCR) ..................................................10-6

10.3.1.2 SPI Status Register (SPSR) ....................................................10-6

10.3.1.3 SPI Data Register (SPDR) ......................................................10-6

10.3.2 SPI Pins ...........................................................................................10-6

10.3.3 SPI Operating Modes ......................................................................10-7

10.3.3.1 Master Mode ...........................................................................10-7

10.3.3.2 Slave Mode .............................................................................10-8

10.3.4 SPI Clock Phase and Polarity Controls ...........................................10-8

10.3.4.1 CPHA = 0 Transfer Format .....................................................10-9

10.3.4.2 CPHA = 1 Transfer Format ...................................................10-10

10.3.5 SPI Serial Clock Baud Rate ..........................................................10-11

10.3.6 Wired-OR Open-Drain Outputs .....................................................10-11

10.3.7 Transfer Size and Direction ...........................................................10-11

10.3.8 Write Collision ...............................................................................10-12

10.3.9 Mode Fault ....................................................................................10-12

10.4 Serial Communication Interface (SCI) ...................................................10-13

10.4.1 SCI Registers ................................................................................10-13

10.4.1.1 SCI Control Registers ...........................................................10-13

10.4.1.2 SCI Status Register ...............................................................10-16

10.4.1.3 SCI Data Register .................................................................10-16

10.4.2 SCI Pins ........................................................................................10-16

10.4.3 Receive Data Pins (RXDA, RXDB) ...............................................10-17

10.4.4 Transmit Data Pins (TXDA, TXDB) ...............................................10-17

10.4.5 SCI Operation ................................................................................10-17

10.4.5.1 Definition of Terms ................................................................10-17

10.4.5.2 Serial Formats .......................................................................10-18

10.4.5.3 Baud Clock ............................................................................10-18

10.4.5.4 Parity Checking .....................................................................10-19

10.4.5.5 Transmitter Operation ...........................................................10-19

10.4.5.6 Receiver Operation ...............................................................10-20

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali NXP Semiconductors Microcontrollore

NXP Semiconductors

NXP Semiconductors LPC1114 Manuale utente

NXP Semiconductors

NXP Semiconductors Freescale 56800TDC Manuale utente

NXP Semiconductors

NXP Semiconductors KIT33816FRDMEVM Manuale utente

NXP Semiconductors

NXP Semiconductors SLN-LOCAL2-IOT Manuale utente

NXP Semiconductors

NXP Semiconductors MPC5746R Manuale utente

NXP Semiconductors

NXP Semiconductors MC9S08QL8 MCU Series Manuale utente

NXP Semiconductors

NXP Semiconductors MPC5748G Low Cost EVB Manuale utente

NXP Semiconductors

NXP Semiconductors QN9090-DK006 Manuale utente

NXP Semiconductors

NXP Semiconductors AN11524 Istruzioni per l'installazione e il funzionamento

NXP Semiconductors

NXP Semiconductors LPC18xx series Manuale utente

NXP Semiconductors

NXP Semiconductors LPC553 Series Manuale di istruzioni

NXP Semiconductors

NXP Semiconductors UM10574 Manuale utente

NXP Semiconductors

NXP Semiconductors AN10815 Istruzioni per l'installazione e il funzionamento

NXP Semiconductors

NXP Semiconductors TWR-KL25Z Manuale utente

NXP Semiconductors

NXP Semiconductors ADC1610S Series Manuale utente

NXP Semiconductors

NXP Semiconductors NTAG I2C plus Manuale utente

NXP Semiconductors

NXP Semiconductors MC9S12ZVMB-Family Manuale utente

NXP Semiconductors

NXP Semiconductors MPC5606S Manuale utente

NXP Semiconductors

NXP Semiconductors LPC1769 Manuale utente

NXP Semiconductors

NXP Semiconductors LPC5500 Series Manuale di riferimento

NXP Semiconductors

NXP Semiconductors KE17Z Series Manuale utente

NXP Semiconductors

NXP Semiconductors K32W Manuale utente

NXP Semiconductors

NXP Semiconductors MRF300AN Manuale utente

NXP Semiconductors

NXP Semiconductors SAFE ASSURE Qorivva MPC5602P Manuale utente

Manuali Microcontrollore popolari di altre marche

AMS

AMS AS7261 Demo Kit Manuale utente

Novatek

Novatek NT6861 Manuale utente

Espressif Systems

Espressif Systems ESP8266 SDK Guida all'installazione

Nuvoton

Nuvoton ISD61S00 ChipCorder Guida

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuale utente

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuale utente

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuale utente

NEC

NEC 78GK0S/K 1+ Series Istruzioni per l'installazione e il funzionamento

Mikroe

Mikroe SEMITECH N-PLC Click Istruzioni per l'installazione e il funzionamento

Intel

Intel Agilex Manuale utente

Cypress

Cypress CY4607 HX2VL Manuale utente

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuale utente

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuale utente

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuale utente

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuale utente

Espressif Systems

Espressif Systems ESP8266EX Istruzioni operative

Abov

Abov AC33M8128L Manuale utente

Laird

Laird BL654PA Manuale utente