Oce BLM550+ Manuale di installazione e funzionamento
Safety guide
Océ BLM550+
Copyright
© 2014, Océ
All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted in
any form or by any means without written permission from Océ.
Océ makes no representation or warranties with respect to the contents hereof and specifically
disclaims any implied warranties of merchantability or fitness for any particular purpose.
Furthermore, Océ reserves the right to revise this publication and to make changes from time to
time in the content hereof without obligation to notify any person of such revision or changes.
Edition 2014-06 US
Contents
Chapter 1
Safety information..............................................................................................................5
Safety information (all countries)................................................................................................................... 6
Chapter 2
Regulation notices............................................................................................................ 13
Regulation notices..........................................................................................................................................14
Chapter 3
General information......................................................................................................... 17
General information....................................................................................................................................... 18
Chapter 4
Miscellaneous....................................................................................................................19
Online support for your product................................................................................................................... 20
Contents
3
Contents
4
Chapter 1
Safety information
Safety information (all countries)
Introduction
All the products have been tested in accordance with the strictest international safety standards.
Please read the following sections before you connect the machine to the power supply. These
sections contain important information with regard to the user safety and the prevention of
equipment problems. Make sure that you observe the safety rules hereinafter. This helps to
assure that you can work with the product/system safely. Make sure that you observe all the
precautions mentioned below.
NOTE
• Safety Regulations require the product name to be registered. In some regions where this
product is sold the following commercial name(s) may be registered as a model number in ( )
instead.
•Océ BLM550+
• Depending on the context, the terms, system, machine, and equipment used in the user
documentation means the product for which this user documentation is applicable.
• Some parts of the contents of this section may not be applicable to your product.
• Please refer to the corresponding Safety Data Sheets for specific safety information. You can
download the Safety Data Sheets from the support site of your product at
"http://
global.oce.com/support/"
Warning and caution indicators (manual)
The following indicators are used in the manuals to categorize the level of the seriousness of
hazard:
WARNING
Indicates a warning concerning operations that may lead to death or injury to persons if not
performed correctly. To use the machine safely, always pay attention to these warnings.
CAUTION
Indicates a caution concerning operations that may lead to injury to persons if not performed
correctly. To use the machine safely, always pay attention to these cautions.
IMPORTANT
Indicates operational requirements and restrictions. Be sure to read these items carefully to
operate the machine correctly, and avoid damage to the machine or property.
NOTE
Indicates a clarification of an operation or contains additional explanations for a procedure.
Reading these notes is highly recommended.
NOTICE: Indicates an operation that must not be performed. Read these items carefully, and
make sure not to perform the described operations
Safety information (all countries)
6Chapter 1 - Safety information
Warning and caution indicators (machine)
The following indicators are used in the machine to warn the user of possible safety risks:
WARNING
Whenever this label is affixed to parts of the machine that are accessible to the user, a remark
can be found in the user documentation, explaining the potential hazard for which the user is
warned or cautioned. The user is urged to consult the user documentation in order to
understand the safety risk and learn how to avoid damage or injury.
CAUTION
Ignoring this “Caution Hot” symbol could cause injury to skin; see also the “Actions in response
to troubles” section.
Persons
•Instructed person
This safety manual describes safeguards for the protection of an instructed person. Instructed
person is the term applied to persons who have been instructed and trained by a skilled
person, or who are supervised by a skilled person, to identify energy sources that may cause
pain and to take precautions to avoid unintentional contact with or exposure to those energy
sources.
Disassemble and modification
WARNING
• Do not remove covers and panels which are fixed to the machine. Some machines have a
high-voltage component or a laser beam source inside that could cause an electrical shock or
blindness.
• Do not modify this machine, because this could cause a fire, electrical shock or breakdown. If
the machine contains a laser, the laser beam source could cause blindness.
• Do not carry out maintenance activities for other components and maintenance materials
than the components and materials that are mentioned in the user manual.
• To avoid any risk, only properly qualified and trained service technicians are allowed to
modify the machine.
• Do not bridge or disable any safety interlock devices.
IMPORTANT
• Do not open any door while the machine starts up or runs, unless the operator panel displays
a message that asks you to open one or more doors.
• Do not bridge any mechanical or electrical circuit breakers.
Safety information (all countries)
Chapter 1 - Safety information 7
Power cord
WARNING
• Do not scratch, abrade, heat, twist, bend, place a heavy object on or cause any other damage
to the power cord. The use of a damaged power cord (exposed core wire, broken wire, for
example) could result in a fire or breakdown. If you find any of these conditions, immediately
turn OFF the power switch and unplug the power cord from the power outlet. Then call your
authorized service representative.
• Do not use an extension lead to connect the machine.
• Only use the mains connector cable that was supplied with the machine.
• Do not use any power cable other than the one provided. Never use the power cable with
any other electrical device.
Power source
WARNING
• Put the power plug directly into a wall socket that has the same configuration as the plug.
The use of an adapter leads can result in an inadequate power supply. If a proper wall outlet
is not available, ask a qualified electrician to carry out the installation.
• Do not use a multiple outlet adapter or an extension lead. Contact your authorized service
representative if an extension lead is required. The use of an extension cord may result in fire
or electrical shock.
IMPORTANT
• Do not connect the machine to a mains voltage that differs from the value as stated on the
power marking label.
NOTE
• If connection to a different mains voltage is required, contact your authorized service
representative.
Power plug
WARNING
• For machines that are connected via a wall socket: Place the machine close to a wall socket
that is easily accessible. The power plug is intended to serve as a disconnect device.
Grounding
WARNING
• Connect the power cord to an electrical outlet (wall socket) that is equipped with a
grounding terminal.
• This equipment has not been designed for connection to an IT power system. An IT power
system is a voltage network in which the neutral wire is not connected to ground.
Safety information (all countries)
8Chapter 1 - Safety information
Installation
WARNING
• Make sure that the machine is placed on a level, horizontal surface of sufficient strength.
• Do not place this machine on an unstable or tilted surface.
• Do not place this machine in a location that is subject to lots of vibrations and shocks.
• Do not use flammable sprays, liquids or gases near this product, because this could cause a
fire.
Ventilation
IMPORTANT
• Do not block the ventilation openings of the machine.
Actions in response to troubles
WARNING
• When a piece of metal, water or any other similar foreign matter gets inside the machine,
immediately turn OFF the power switch and unplug the power cord from the power outlet.
Then call your authorized service representative.
• Immediately stop using the machine if the machine becomes excessively hot, emits smoke,
or produces unusual odors or noises. Immediately turn OFF the power switch and unplug the
power cord from the power outlet. Then call your authorized service representative.
• Stop using the machine if the machine was dropped or a cover was damaged. Immediately
turn OFF the power switch and unplug the power cord from the power outlet. Then call your
authorized service representative.
Consumables, supplies and maintenance materials
WARNING
• Keep maintenance materials away from children.
CAUTION
• Always use the materials which the manufacturer recommended and which are developed
for this machine. Materials not approved by the manufacturer may result in faults in your
machine.
• Use maintenance materials or other materials for their intended purpose only.
IMPORTANT
• Do not place any liquids on the machine.
Safety information (all countries)
Chapter 1 - Safety information 9
Moving the machine
WARNING
• Make sure that you disconnect the power cord and other cables before you move the
machine.
• Make sure that you check the documentation for the correct machine location before you
move the machine.
• Make sure that whenever the machine is moved, this is done by properly qualified people
who have received adequate instructions.
General use
WARNING
• Do not lean, lie or stand on any part of the machine, including any unit that can be pulled
outward (e.g. paper drawers).
Safety information (all countries)
10 Chapter 1 - Safety information
Indice
Altri manuali Oce Stampante
Oce
Oce TCS500 Manuale utente
Oce
Oce OP30C Manuale utente
Oce
Oce CS620 Pro Manuale di istruzioni
Oce
Oce ColorWave 600 Manuale utente
Oce
Oce CS2136 Manuale utente
Oce
Oce VarioPrint 2045-65 NC Manuale utente
Oce
Oce fx2081 Manuale utente
Oce
Oce ColorWave 600 Manuale utente
Oce
Oce Arizona 360 GT Manuale utente
Oce
Oce ColorWave 650 Manuale utente
Oce
Oce Arizona 350 GT Manuale utente
Oce
Oce Arizona 550 GT Manuale utente
Oce
Oce VarioPrint 2090 Manuale di istruzioni e di sicurezza
Oce
Oce Arizona 250 GT Manuale utente
Oce
Oce CS6407 Istruzioni per il montaggio
Oce
Oce TDS750 Manuale utente
Oce
Oce TDS400-CS Manuale utente
Oce
Oce PP20D Manuale utente
Oce
Oce Arizona 200 GT Manuale utente
Oce
Oce CS9065 Manuale utente
