Odys Shark Manuale utente

ODYS Shark

- 1 -

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings, install in accordance with

the instructions.

8) Do not install near any heat sources such as radiations, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9) Do not alter the safety purpose of the polarized plug. If the

provided plug does not fit into your outlet, consult an electrician for

replacement.

10) Protected the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Unplug this apparatus during lighting storms or when unused for

long periods of time.

13) Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as damage to the power-supply cord or plug, liquid or other objects

have entered the apparatus, the apparatus has been exposed to

rain or moisture, the apparatus does not operate normally, or has

been dropped.

14) Removing the plug from the main outlet will completely disconnect

the device from its electrical source. While in use, the main outlet

must be free of all obstruction to insure readily accessibility.

15) The ventilation openings should be free at all times. Do not cover

the ventilation openings with items, such as newspapers, table-

cloth, curtains, etc.

16) Do not place items or open flames (candles, etc) on this apparatus.

17) Attention should be drawn to the environmental aspects of battery

disposal.

18) Use this apparatus only in moderate climates.

WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

WARNING: The batteries should not be exposed to excessive heat such as

direct sunlight, fire or other heat sources.

ODYS Shark

- 2 -

The symbol indicates that dangerous voltages and risk of electric shock

are present within this unit.

The symbol indicates important operating and maintenance instructions

within the literature accompanying this unit.

The symbol indicates that this product incorporates double insulation

between hazardous mains voltage and user accessible parts. When

servicing use only identical replacement parts.

CAUTION:

Should the apparatus be exposed to electrostatic

electricit

, it ma

malfunction and ma

uire a reset.

Tips regarding environmental protection

At the end of its operating life, this product may not be

disposed of by way of your normal household waste.

Instead, it must be delivered to a collection point for

recycling electrical and electronic equipment. The icon

on the product, in the operating instructions or on the

packaging, indicates this.

The materials used in manufacturing this product are

recyclable, depending on their identifying markings. By

recycling this equipment, by recycling its components, or

through other procedures of re-using outdated

equipment, you are making an important contribution to

the protection of our environment. Please ask you local

municipal administration for the location of the

correspondin

rec

clin

point.

Battery Recycling

In order to ensure the environmentally friendly disposal

of batteries, please do NOT dispose of used

batteries through normal household waste. Please take

the batteries to your local retail or community collection

point for recycling.

The following may be an indication of a discharged

battery: The device cannot be switched on. The

device switches off automatically and "Battery Empty" is

shown in the display. The device and or battery do not

function properl

ODYS Shark

- 3 -

Support

URL: http://www.odys.de

See our website for the latest information concerning this product, other

products manufactured by our company and our company itself. If you have

questions or problems, please read the FAQs on our website or contact our

customer support service center: support@odys.de.

Appropriate use

Device is designed for playing music in commonly used formats and

transferring sound from a Music or Sound source to its speakers using a cable

or Bluetooth connection. It is exclusively meant for this purpose and must only

be used for the same.

This also includes paying attention to all information contained in this

operating manual, especially in the safety instructions. Any other usage is

considered to be improper and may lead to material damages and even

personal injuries. Moreover, it will result in the immediate loss of guarantee.

The manufacturer does not bear any liability for damages caused due to

improper use.

This manual may not reflect your actual device’s operation. All

information is subject to change without prior notification. Please

follow your actual device’s operational procedures.

ODYS Shark

- 4 -

Content

Content.............................................................................................- 4 -

1Specifications ..........................................................................- 5 -

2PACKAGE CONTENTS..........................................................- 5 -

3MAIN UNIT..............................................................................- 5 -

4REMOTE CONTROL ..............................................................- 6 -

5POWER SUPPLY....................................................................- 7 -

6Setup the unit ..........................................................................- 7 -

6.1 SLEEP TIMER SETTING....................................................- 7 -

6.2 HOW TO SET TIME............................................................- 7 -

6.3 TIMER SETTING ................................................................- 7 -

7USB & SD CARD PLAYBACK ................................................- 8 -

8BLUETOOTH OPERATING....................................................- 9 -

8.1 Pairing.................................................................................- 9 -

8.2 RE-CONNECT TO A BLUETOOTH AUDIO SOURCE.......- 9 -

9Basic Function.......................................................................- 10 -

9.1 MUTE THE UNIT ..............................................................- 10 -

9.2 VOLUME LEVEL/TREBLE/BASS ADJUSTMENT............- 10 -

9.3 EQ EFFECTS....................................................................- 10 -

9.4 PROFESSIONAL AUDIO MODES ...................................- 10 -

10 FM RADIO.............................................................................- 10 -

10.1 TUNING THE FM RADIO.............................................- 10 -

10.2 STORING YOUR FAVORITE RADIO STATION..........- 11 -

11 CONNECTING WITH OTHER DEVICES .............................- 11 -

11.1 AUDIO IN......................................................................- 11 -

11.2 LINE IN .........................................................................- 11 -

11.3 OPTICAL INPUT...........................................................- 12 -

12 TROUBLE SHOOTING.........................................................- 12 -

13 Warranty condition ................................................................- 13 -

ODYS Shark

- 5 -

1 Specifications

1) Compatible with bluetooth devices and other devices containing AUX

output connections.

2) Easy operation using the buttons located on the top of the device.

2 PACKAGE CONTENTS

ODYS Shark, Manual, Remote Control, 2 Wall mounting brackets, 2 feet,

Line-In Cable, AUX-In Cable

3 MAIN UNIT

12345

8910

11 12 13 11

1. VOLUME - BUTTON

2. VOLUME + BUTTON

3. POWER BUTTON

4. MODE BUTTON

5. PAIR/PLAY/PAUSE BUTTON

6. SD CARD SLOT

7. USB PORT

8. LCD DISPLAY

9. BLUETOOTH INDICATOR

10. REMOTE SENSOR

11. HANGING HOLES

12. FM ANTENNA

13. AC CORD

14. OPTICAL IN JACK

15. AUX IN JACKS

16. LINE IN JACK

ODYS Shark

- 6 -

4 REMOTE CONTROL

Attention:

Connecting the device to the main power source while in operation may

cause damage to the amplifier and or DVD player.

We recommend connecting all components, which includes the

SOUNDBAR to the main power supply before attempting to operate this

device.

Damage resulting from improper power use is not covered within the

guarantee guidelines.

1. SLEEP BUTTON

2. MODE BUTTON

3. CLOCK BUTTON

4. TIMER BUTTON

5. NUMERIC BUTTONS

6. VOICE BUTTON

7. EQ BUTTON

8. BASS +/- BUTTONS

9. TREBLE +/- BUTTONS

10. MUTE BUTTON

11. POWER BUTTON

12. TUNING/SKIP/SEARCH BACKWARD

13. TUNING/SKIP/SEARCH FORWARD

14. MEM BUTTON

15. PAIR/PLAY/PAUSE BUTTON

16. MUSIC BUTTON

17. MOVIE BUTTON

18. VOL +/- BUTTONS

19. CH+/- BUTTONS

ODYS Shark

- 7 -

5 POWER SUPPLY

Plug AC plug into the outlet socket on the unit for connecting the main power.

NOTE: If not any audio signal inputs to the unit in about 10 minutes, the unit

will enter to standby mode automatically (except at FM mode).

6 Setup the unit

6.1 SLEEP TIMER SETTING

You can set the sleep timer at power on modes as following instructions:

During playback, press the SLEEP button on the remote control repeatedly to

cycle through the sleep time options, Release the SLEEP button when your

desired sleep time shows on the screen. Once the sleep time is expired, the

unit will be switched off.

During playback, press SLEEP button once to check the remaining sleep time.

6.2 HOW TO SET TIME

At the standby mode, press and hold the CLOCK button on the remote until

Hour flashes on the screen; use the TUNING/SKIP/SEARCH buttons on the

remote to adjust the hour and confirm your adjustment by pressing the

CLOCK button on the remote; Minute starts blinking on the screen, press the

TUNING/SKIP/SEARCH buttons on the remote to set the minute accordingly,

press the CLOCK button on the remote again to confirm your setting.

During playback, press and hold the CLOCK button on the remote to check

the current time.

Note: The time only could be set at standby mode.

6.3 TIMER SETTING

1. At standby mode, press and hold the TIMER button on the remote. The

hour on the display will begin blinking on the screen with the flashing timer

icon “T”.

2. Press the TUNING/SKIP/SEARCH buttons on the remote to adjust the

hour.

3. Press the TIMER button to confirm. The minute on the display will begin

blinking.

4. Press the TUNING/SKIP/SEARCH buttons on the remote to adjust the

minute.

ODYS Shark

- 8 -

5. Press the TIMER button on the remote to confirm your setting.

6. After the set time is reached, the unit will power on to the radio

automatically.

7. The timer function can be deactivated or activated by short pressing the

TIMER button on the remote.

7 USB & SD CARD PLAYBACK

1. Power on the unit, insert an USB or a SD card into the unit.

2. Press MODE button repeatedly to switch to USB or card mode. The

playback will start automatically.

3. Press the TUNING SKIP/SEARCH FORWARD button on the remote to skip

to the next track; press and hold to search through the track forward.

4. Press the TUNING SKIP/SEARCH BACKWARD button on the remote to

skip to the previous track; press and hold to search through the track

backward.

ODYS Shark

- 9 -

8 BLUETOOTH OPERATING

8.1 Pairing

This unit can receive stereo audio signal from a BLUETOOTH stereo audio

source device.

1. Power on the unit, switch to BLUETOOTH mode by pressing MODE button

repeatedly.

2. LED indicator rapid blinking while it is pairing.

3. Enable the Bluetooth of the Bluetooth audio source device.

4. Pair and connect to ODYS Shark (MIB668A) on the audio source device. If

prompted for password, enter “0000”.

5. Pairing successful (LED indicator blue), ready to stream music.

6. During playback, press PLAY/PAUSE button to cease or resume the

playback.

7. During playback, press TUNING/SKIP/SEARCH FORWARD button to skip

to the next track; press TUNING/SKIP/SEARCH BACKWARD button twice

to skip to the previous track.

8. During playback, press and hold TUNING/SKIP/SEARCH buttons to search

through the current track forward or backward.

Note:

Pairing mode is cancelled after 1.5 minutes.

Pairing the playback device with the ODYS SHARK is only possible when

the ODYS SHARK is in the pairing mode and the LED blinks blue.

The above are generic steps to pair a BLUETOOTH device, for more

specific instructions on BLUETOOTH connectivity for your device, please

consult your manufacturer’s manual.

8.2 RE-CONNECT TO A BLUETOOTH AUDIO SOURCE

If the device is already paired with the ODYS Shark, but became unconnected

even with both Bluetooth devices turned on. You can re-connect them by

following steps:

1. Press and hold the PAIR button on the unit or on the remote to re-link the

audio source device. The Bluetooth indicator will blink for about 1.5

minutes for connecting.

2. Select the ODYS Shark (MIB668A) on the audio source device for

connecting. Bluetooth indicator will turn to solid blue if the ODYS Shark

(MIB668A) and the device have been re-connected successfully.

3. You can also re-connect the ODYS Shark (MIB668A) by using Bluetooth

operation of the device to be connected.

ODYS Shark

- 10 -

9 Basic Function

9.1 MUTE THE UNIT

During playback, press the MUTE button on the remote to switch off the

audio. Press the button again to resume the audio.

9.2 VOLUME LEVEL/TREBLE/BASS ADJUSTMENT

Press the VOLUME +/- buttons or TREBLE +/- buttons or BASS +/- buttons

on the remote to adjust the volume output level or treble effect or bass effect.

9.3 EQ EFFECTS

During playback, press EQ button on the remote repeatedly to cycle through

the EQ options; when your desired EQ effect shows on the screen, release

the button.

9.4 PROFESSIONAL AUDIO MODES

During playback, press the VOICE, MUSIC or MOVIE buttons on the remote

to switch among voice, music and movie audio modes for getting high sound

quality. The audio modes can reveal the characters and details of the sound

of the voice, music and movie and make you liked being there.

10 FM RADIO

10.1 TUNING THE FM RADIO

1. Power on the unit, switch to FM (RADIO) mode by pressing MODE button

repeatedly.

2. Press the TUNING/SKIP/SEARCH buttons on the remote to fine tune radio

station. Press and hold the TUNING/SKIP/SEARCH buttons on the remote

to auto search radio station forward or backward respectively (When an

available station will be found, the unit will broadcast it immediately and the

searching will be stopped). During auto searching, press the

TUNING/SKIP/SEARCH buttons on the remote to stop the searching.

3. At radio mode, it is possible to access the frequency via numeric buttons on

the remote control. For example, press buttons 8, 9 and 8 to get to 89.8

MHz.

Indice

Altri manuali Odys Altoparlanti

Odys

Odys Xound Mini Manuale utente

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente