Oki 70043501 Manuale utente
Hard Disk Drive (HDD)
Installation Instructions
HDD PART NUMBER
70043501
Every effort has been made to ensure that the
information in this document is complete, accurate,
and up-to-date. Oki Data assumes no responsibility
for the results of errors beyond its control. Oki Data
also cannot guarantee that changes in software and
equipment made by other manufacturers and
referred to in this guide will not affect the
applicability of the information in it. Mention of
software products manufactured by other
companies does not necessarily constitute
endorsement by Oki Data.
© 2004 by Oki Data Americas, Inc. All rights
reserved.
Written and produced by the Oki Data Training &
Publications Department. Please address any
comments on this publication:
Training & Publications Dept.
Oki Data Americas, Inc.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
For the latest product information, printer drivers,
manuals, special offers, etc., go to
http://my.okidata.com.
OKI is a registered trademark/marque déposée/marca
registrada Oki Electric Industry Company, Ltd.
Macintosh is a trademark of Apple Computer, Inc.,
registered in the U.S. and other countries. Windows
and Windows NT are either registered trademarks or
trademarks of Microsoft Corporation in the United
States and other countries.
1
Prepare the Printer
1. First:
• Turn off the printer (1).
• Unplug the power cord (2).
• Detach the interface cable—USB, parallel, or
Ethernet—from the back of the printer (3).
2
2. Open the top cover.
3. Loosen the thumbscrew holding the printer
side cover in place.
3
4. Open the front cover.
5. Lift up on the ends and remove the side panel
from the printer.
4
Install the Hard Disk Drive
(HDD)
1. Locate the drive connector (1) on the control
board:
2. Remove the HDD from its shipping package.
5
3. Insert the HDD cable firmly into the
connector.
6
4. Mount the HDD: place the HDD in the slots
on the bracket, then push the handle against
the HDD to lock it in place.
7
Complete the Installation
1. Replace the side panel on the printer and
secure it in place with the thumbscrew.
2. Close the front cover and the top cover.
3. Reattach the interface cable.
4. Plug in the power cord and turn on the printer.
8
Check for Proper
Installation
Generate a MenuMap printout:
1. Press +one or more times until
INFORMATION MENU appears on the display.
2. Press ENTER twice.
The MenuMap prints.
3. Check the top section of the MenuMap
printout to verify that it shows “HDD:
installed.”
4. If “HDD: uninstalled” still appears, remove
the printer’s side panel and make sure the
connection between the HDD and the printer
is secure, then replace the side panel and print
and check the MenuMap again.
BACK ENTER
OLN INE
CANCEL
MENU
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Oki Accessori per stampanti
Oki
Oki C9300 Series Manuale utente
Oki
Oki ES3640eMFP Manuale utente
Oki
Oki B4200 Manuale utente
Oki
Oki B6500 Series Manuale utente
Oki
Oki C3200n Manuale utente
Oki
Oki B930dn Manuale utente
Oki
Oki B4100 Manuale utente
Oki
Oki B6500 Series Manuale utente
Oki
Oki C9600hdn Manuale utente
Oki
Oki C5150n Manuale elenco delle parti
Oki
Oki C9600hdn Manuale utente
Oki
Oki LP441s Manuale utente
Oki
Oki OKICOLOR8n Guida
Oki
Oki MPS3537mc Series Manuale utente
Oki
Oki B930dn Manuale utente
Oki
Oki ML670100 Manuale utente
Oki
Oki 42158411 Manuale utente
Oki
Oki C6100dn Manuale utente
Oki
Oki B4400 Series Manuale utente
Oki
Oki CX 1145 MFP Manuale utente
