Oki GL408e Manuale utente

Read this Installation Guide before and during the installation of

the above accessory. Keep this Installation Guide handy for

future reference.

REAL-TIME-CLOCK INSTALLATION GUIDE

For printer models:

GL 4xx

Series

Real-Time Clock Installation Guide

1 General

1.1 Important information

This quick guide provides important information on how to set up your

new SATO product.

Be sure to read this quick guide thoroughly before using this printer. It

is an integral part of the product and should be kept in the immediate

vicinity of the device and available to the operating staff.

1.2 Limitation of liability

All information in this manual have been compiled under due

consideration of federal standards and regulations.

The manufacturer will not be held liable for damage resulting from:

Disregarding these instructions

Unintended use of the printer

Unauthorized technical modifications

Use of unapproved spare parts

Use of unapproved consumables

FCC WARNING

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

NOTICE

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation.

Real-Time Clock Installation Guide

1.3 Explanation of symbols

This instruction manual uses various warning icons to help you

understand the safe operation of your printer. Explanations of the

icons are below.

WARNING!

Indicates neglectful or erroneous use may cause

irreparable damage to the product, serious injury to

the operator, or worse.

CAUTION!

Indicates a specific point where caution should be

used. The graphic within the triangle will indicate the

specific issue, i.e.; the sign on the left indicates a

caution for potential electrical shock.

CAUTION!

Indicates a potentially hazardous situation which,

if not avoided, may result in damage to your

product or host equipment.

NOTE!

Emphasizes useful tips or recommendations for

efficient and smooth operation of your printer.

Real-Time Clock Installation Guide

1.4 Contact and Document Information

Extensive contact information of worldwide SATO operations can be found on the Internet at

www.satoworldwide.com

any form whatsoever without the express permission of SATO. The materials in this

document are provided for general information and are subject to change without notice.

SATO assumes no responsibilities for any errors that may appear.

GROUP

TIO

438A Alexandra Road #05-01/04,

Alexandra

Te hnopark, Singapore 119967

Phone:

65-6271-2122

Fax :

65-6271-2151

Email: sales@sato-int. om

SATO AMERICA,

INC.

10350 Nations Ford

Road Suite A,

Charlotte, NC

28273

Phone: 1-704-644-1650

Fax: 1-704-644-1662

Email: satosales@satoameri a. om

SATO

INTERNATIONAL EUROPE N.V.

(

)

Americas

TO I

, I

(Regional HQ)

10350

Nations Ford Road

Suite A,

Charlotte, NC 28273

Phone:

1-704-644-1650 Fax:

1-704-644-1662

Email: satosales@satoameri a. om

SATO LABELING SOLUTIONS AMERICA, INC.

1140 Windham Parkway, Romeoville, Illinois 60446

Phone: 630-771-4200

Fax :

630-771-4210

Email: sales@satolabeling. om

Horti ultural Division

930 Jimmy

Ann Drive

Daytona Bea h, FL 32117

Phone: 1-386-274-5566 Fax:

1-386-274-5599

SATO UK

LTD

sse

Phone: 32(0)-2-788-80-00 Fax: 32(0)-2-788-80-80

Email: info@be.sato-europe. om

SATO LABELLING SOLUTIONS EUROPE GmbH

Ersheimer Straße

71,

69434 Hirs hhorn, Germany

Phone:

49-6272-9201-324 Fax: 49-6272-9201-399

SATO FRANCE

SAS

Par D'A tivities - Rue Ja ques Messager - 59175 Templemars,

Fran e

Phone:

33-3-20-62-96-40 Fax:

33-3-20-62-96-55

Asia Pacific & Oceania

SATO INTERNATIONAL

ASIA PACIFIC PTE.

LTD.

(Regional HQ)

438A Alexandra Road #05-01/04,

Alexandra

Te hnopark, Singapore 119967

Phone :

65-6271-5300

Fax :

65-6273-6011

Email: sales@sato-int. om

SATO

ASIA PACIFIC PTE.

LTD.

438A Alexandra Road #05-01/04,

Alexandra Te hnopark, Singapore 119967

Phone: 65-6271-5300

Fax:

65-6273-6011

Email: sales@satoasiapa ifi . om

Phone: 44-1255-240000

Fax

: 44-1255-240111

Email :

enquiries@satouk. om

SATO POLSKA SP Z O.O.

Ul. Wro lawska 123, 55-015 Radwani e

K/Wro lawia, Poland

Phone: 48-71-381-03-60

Fax: 48-71-381-03-68

Email: info@sato-europe. om

SATO IBERIA S.A.

Dels

Corrals Nous, 35-39,

Pol. Can Roqueta,

08202

- Sabadell, Bar elona, Spain

Phone: 34-93-492-5750

Fax : 34-93-786-3451

SATO AUTO-ID MALAYSIA SDN. BHD.

No.25, Jalan Pemberita U1/49, Temasya

Industrial Park

Se tion U1, 40150 Shah Alam,

Selangor

Darul Ehsan, Malaysia

Phone:

60-3-7620-8901 Fax:

60-3-5569-4977

Email: sales@satosms. om.my

SATO AUTO-ID (THAILAND) CO.,

LTD.

292/1 Moo 1 Theparak Road,

Tumbol Theparak,

Amphur Muang, Samutprakarn 10270

Phone:

662-736-4460

Fax:

662-736-4461

ACE

Hongkou Area,

Shanghai, China 200080

Phone:

(86)

021-

63068899

Fax: (86) 021- 63091318

SATO

NEW ZEALAND LTD

30 Apollo Drive, Mairangi

Bay

PO Box

305-031, North Shore, Au kland, New Zealand

ax:

)

VIC 3168, Melbourne, Australia

Phone: 61-3-8814-5330

Fax: 61-3-8814-5335

For a full list of all SATO offi es,

refer to

www.satoworldwide. om

Real-Time Clock Installation Guide

Figure 1. Removing the Left-Side Cover of the printer

GL4xxe Real-Time Clock Installation

Before installing the Real-Time Clock chip, make sure the printer is OFF and

disconnected from the power supply. Make sure you have discharged any static

electricity (by touching a grounded component on the printer). Remove all interface

cards prior to removing the rear side cover.

1. Use a Phillips head screwdriver to remove the three screws (1) that secure

the left-hand side cover [labelled (2) in the illustration below] that protects

the electronics of the printer.

2. Slide the side cover leftward and upward, as shown by the line marked (a).

3. Once the cover has been removed, locate the area circled in RED. There is

an empty socket for mounting the Real-Time-Clock chip.

(a)

Real-Time Clock Installation Guide

GL4xxe Real-Time-clock Installation

4. Insert the chip labelled (3) into the socket, making sure that Pin 1 of the chip

is aligned to Pin 1 of the socket. Mount it into place firmly.

5. Reinstall the Left-Side cover and reconnect the interface card, power and

signal cables.

6. Turn the printer ON and proceed to the next page for instructions on setting

the clock.

Real-Time Clock Installation Guide

Clock configuration via the LCD Menu

1. Turn the printer ON and wait for it to initialize and go into ONLINE mode.

2. Press the Line Button to go to Offline mode

3. Press the Function Button to display the different menu icons

4. Select the Advanced Mode Menu and press the Enter Button.

5. Scroll to the Set Calendar Menu using the cursor buttons.

6. This menu allows you to set the date and time.

The date is expressed in:

hh:mm YYYYMMMDD.

hh = hour (24 hour format)

mm = minute

MMM = month

DD = day

YYYY = year

7. When completed, go back to ONLINE mode after saving the new settings.

Using SBPL Commands

The date and time can also be set using the <ESC>WT Setting of Calendar Command.

CAL

ENDAR

CONF

IGURA

TION COMMAND

FUNCTION

To set the time and date of the printer’s internal clock.

FORMA

<ESC>

bbcc

dde

Year

(00 to

99)

Month

(01 to 12)

Day

(01 to 31)

Hour

(00 to 23)

Minute

(00 to 59) Note: place anywhere within the data stream.

EXAMP

<ESC>A

<ESC>

T9312251300

<ESC>Z

OUTPUT

There is not a printer output as a result of this command.

NOTES

Once

the year

increments past “99”

it will wrap back

“00”. This command

can only be used

once

per data stream.

If a print quantity of more than one

label per job is used,

the same

time and

date will be on

each label of the entire print job.

Figure

Setting the

clock via the LCD

OFFLINE

ADVANCED MODE

Set Calendar

MM/DD/YY

hh:mm

Real-Time Clock Installation Guide

Altri manuali per GL408e

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente