Olympus U-APT Manuale utente
INSTRUCTIONS
U-APT
ARROW POINTER
This instruction manual is for the Olympus Arrow Pointer Model U-APT. To ensure the safety, obtain
optimum performance and to familiarize yourself fully with the use of this attachment, we recommend that
you study this manual thoroughly before operating the microscope. Retain this instruction manual in an
easily accessible place near the work desk for future reference.
A X 9 8 9 7
Optical Microscope Accessory
In accordance with European Directive on Waste Electrical and Electronic Equipment, this
symbol indicates that the product must not be disposed of as unsorted municipal waste, but
should be collected separately.
Refer to your local Olympus distributor in EU for return and/or collection systems available in
your country.
For Korea only
ࣾ匏ࣜ匶匶ࣜࣜࣤ儆洛殯ࣜ愯暧皻柦匶沖沲ࣥ
決ࣜ匶匶垚ࣜ儆洛殯ࣤࣾ匏ࣥࣜ洊沖砒洇穯匶匶嵢昢ࣜ渂嵢ࣜ儆洛櫖昢ࣜ斲殯穞垚ࣜ冉汊
徯洇求嵢ࣜ穞彶ࣨࣜ微姦ࣜ滆櫳櫖昢ࣜ斲殯穦ࣜ朞ࣜ沎枻城埪࣪
This product is applied with the requirements of standard IEC/EN61326-1 concerning
electromagnetic compatibility.
- Immunity Applied to industrial and basic environment requirements.
U-APT
CONTENTS
Correct assembly* and adjustments are critical for the arrow pointer to exhibit its full performance. If you are going to assemble the
attachment yourself, please carefully read Chapter 4, “ASSEMBLY” (pages 10 to 11).
IMPORTANT — Be sure to read this section for safe use of the equipment. — 1-4
1 CONTROLS 5
2 OPERATION 6-8
2-1 Focus Adjustment of the Arrow Pointer.......................................................................................................................................................................... 6
2-2 Pointer Operation ............................................................................................................................................................................................................................................ 7
2-3 Notes on Photomicrography .......................................................................................................................................................................................................... 8
3 SPECIFICATIONS 9
4 ASSEMBLY 10-11
1Adjusting the Pointer Brightness; 2 Selecting the Pointer Color;
3Moving the Pointer
PROPER SELECTION OF THE POWER SUPPLY CORD ........................................................................................................................ 12-15
1
IMPORTANT
This system employs a UIS (Universal Infinity System) optical design, and should be used only with UIS micro-
scopes, eyepieces, objectives and condensers for the BX2 series. (Some of the modules designed for the BX
series are also usable. For details, please consult Olympus or the catalogues.) Less than optimum performance
may result if inappropriate accessories are used.
1Getting Ready
1. This manual pertains only to the arrow pointer. Before using this attachment together with the microscope and associated
options, make sure that you have carefully read and understood their manuals, and understand how the system should
be operated together.
2. This system has a field number of 22. When the arrow pointer is combined with a superwide-field observation tube, the
pointer cannot be moved around the entire range of the field of view. Also note that a ghost of pointer may be observed
in such a case.
3. If the eyepiece in use incorporates a micrometer, ghost may be observed with dark specimens.
4. Always use the power cord and AC adapter provided by Olympus. If no power cord is provided, please select the proper
power cord by referring to the section “PROPER SELECTION OF THE POWER SUPPLY CORD” at the end of this instruction
manual. If the proper power cord is not used, product safety and performance cannot be guaranteed.
5. To ensure safety, disconnect the power plug of the AC adapter from the power outlet after operation.
6. The AC adapter cord should be fixed with the provided stoppers at a position that does not come in the way of operation.
Take special care so that the cord does not contact the lamp housing.
U-APT
2
Safety Symbols
The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment in
the safest possible manner.
Supply DC current (from the provided AC adapter).
Indicates an input jack.
Indicates a pointer.
Symbol Meaning
2 Maintenance and Storage
1. To clean the lenses and other glass components, simply blow dirty away using a commercially available blower and wipe
gently using a piece of cleaning paper (or clean gauze).If a lens is stained with fingerprints or oil smudges, wipe it gauze
slightly moistened with commercially available absolute alcohol.
Since the absolute alcohol is highly flammable, it must be handled carefully. Be sure to keep it away from open
flames or potential sources of electrical sparks —— for example, electrical equipment that is being switched on or
off. Also remember to always use it only in a well-ventilated room.
2. With any part of the arrow pointer other than glass components gets dirty, do not use organic solvents. If a plastic part gets
dirty, use a cloth moistened with a diluted neutral detergent.
3. Do not disassemble any part of the arrow pointer. This could result in malfunctions or reduced performance.
4. When the arrow pointer is not used, make sure to put the dust cover on it.
3
Observation tube
Arrow pointer
U-APT
Drawing
attachment
U-DA
Magnification
changer
U-CA
U-ECA
Intermediate
tube
for AN360
U-OPA
Polarizing
intermediate
tube
U-CPA
Reflected
illuminator
U-RLA
Universal
illuminator
BX-URA2
Fluorescence
illuminator
BX-RFA
Microscope frame
BX40
BX50
Microscope frame
BX41
BX51
BX52
Microscope frame
BX45
BX46
BX60
Universal
illuminator
U-URA
Microscope frame
BX43
BX53
Universal
reflected
illuminator
BX3-URA
Coded
fluorescence
illuminator
BX3-RFAS
5. When the arrow pointer is used with the BX40, BX41, BX43, BX45, BX46, BX50, BX51, BX52, BX53, BX60 microscope frame,
only one intermediate attachment can be mounted in a 2-level configuration.
However, the usable intermediate attachment is restricted depending on whether it is mounted above or below the arrow
pointer.
· The only intermediate attachments that can be used on top of the arrow pointer is the U-EPA or U-EPA2 eyepoint adjuster.
For the intermediate attachments that can be used below the arrow pointer, consult the following sketch and select the
optimum one.
U-APT
4
If the system is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition, the
system equipment may also be damaged. Always use the system as outlined in this instruction manual.
The following symbols are used to set off text in this instruction manual.
: Indicates that failure to follow the instructions in the warning could result in bodily harm to the
user and/or damage to equipment (including objects in the vicinity of the equipment).
# : Indicates that failure to follow the instructions could result in damage to equipment.
} : Indicates commentary (for ease of operation and maintenance).
3Caution
5
CONTROLS
Arrow Pointer U-APT Pointer control lever (Page 6)
AC adapter input connector
Pointer brightness control (Page 6)
OFF/Continuously variable
Pointer color switch lever (Page 6)
Up: Red. Middle: Shielded. Down: Green.
Tube mounts
Output plug
Input connector
AC Adapter
U-APT
6
Fig. 1
Fig. 2
OPERATION
2-1 Focus Adjustment of the Arrow Pointer (Figs 1 & 2)
}For use in focusing of the pointer, one of the eyepiece sleeves should be
equipped with a helicoid (or a focusing mask).
1. Turn the pointer brightness control @ of the arrow pointer clockwise to
turn on the pointer ( ).
}Set the pointer color switching lever ² to other position than the middle
position. If the pointer cannot be seen in the field of view, move the pointer
at the center of field using the pointer control lever ³.
2. Looking into the eyepiece sleeve without the diopter adjustment ring, turn
the helicoid | of the eyepiece to focus on the pointer.
3. Looking into the eyepiece sleeve with the diopter adjustment ring, turn the
diopter adjustment ring ƒ to focus on the pointer.
4. Turn the coarse and fine focus adjustment knobs of the microscope to
focus on the specimen.
²
ƒ
@
³
|
7
2-2 Pointer Operation
}Light intensity alignment range of the pointer has been set to comply with
a dark specimen, such as the case of fluorescence observation. For this
reason, in case of brightfield observation with high light illumination, you
may feel it difficult to identify the pointer even by rotating the pointer bright-
ness control dial which is not defect of this product.
1. While looking into the eyepiece, turn the pointer brightness control @
clockwise to vary the brightness continuously.
2. Turning the control to the fully counterclockwise position switches it off.
Using the pointer color switching lever ² select a color which is clearly
distinguishable from the specimen color.
· Top position: Red
· Middle position: Light shielded.
· Down position: Green
Fig. 3
1Adjusting the Pointer Brightness (Fig. 3)
2Selecting the Pointer Color (Fig. 3)
Fig. 4
@
3Moving the Pointer (Fig. 4)
Move the pointer to the desired location in the field of view by operating
the pointer control lever @ on the front of the arrow pointer.
}When the pointer is not used, move it away from the field of view or set the
pointer color switching lever to the middle position.
²
@
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Olympus Attrezzature da laboratorio
Olympus
Olympus SZX2 Series Manuale utente
Olympus
Olympus AL120-6 Series Manuale utente
Olympus
Olympus U-HGLGPS Manuale utente
Olympus
Olympus OLYMPUS OSF-3 Manuale utente
Olympus
Olympus SZX-DO Manuale utente
Olympus
Olympus SZX2-ILLT Manuale utente
Olympus
Olympus CX-DO Manuale utente
Olympus
Olympus MX61A Manuale utente
Olympus
Olympus SZX-SDO2 Manuale utente
Olympus
Olympus OMCL-TR800PSA Manuale utente
Olympus
Olympus U-LH50HG Manuale utente
Olympus
Olympus U-AFA2M-VIS Manuale utente
Olympus
Olympus BioLever mini Manuale utente
Olympus
Olympus SZ2-STS Manuale utente
Olympus
Olympus U-PCD2 Manuale utente
Olympus
Olympus HysteroFlow Manuale utente
Olympus
Olympus U-UCD8A Manuale utente
Olympus
Olympus RollerFORM Manuale utente
Olympus
Olympus 72DL PLUS Manuale utente
Olympus
Olympus SZ2-STU1 Manuale utente
Manuali Attrezzature da laboratorio popolari di altre marche
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manuale utente
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manuale utente
NI
NI PXI-5422 Manuale
Collomix
Collomix Aqix Manuale utente
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente
Ocean Insight
Ocean Insight FLAME-NIR+ Manuale utente
