Omron SYSMAC CS Series Manuale utente

OPERATION MANUAL

Cat. No. W406-E1-09

SYSMAC CS/CJ Series

Loop Control Boards

CS1W-LCB01/LCB05

Process-control CPU Units

CS1D-CPU@@P

(CPU Unit: CS1D-CPU@@H, Loop Controller: LCB05D)

Loop-control CPU Units

CJ1G-CPU42P

(CPU Unit: CJ1G-CPU42H, Loop Controller: LCB01)

CJ1G-CPU43P/44P/45P

(CPU Unit: CJ1G-CPU43H/44H/45H, Loop Controller: LCB03)

SYSMAC CS/CJ Series

Loop Control Boards

CS1W-LCB01/LCB05

Process-control CPU Units

CS1D-CPU@@P

(CPU Unit: CS1D-CPU@@H, Loop Controller: LCB05D)

Loop-control CPU Units

CJ1G-CPU42P

(CPU Unit: CJ1G-CPU42H, Loop Controller: LCB01)

CJ1G-CPU43P/44P/45P

(CPU Unit: CJ1G-CPU43H/44H/45H, Loop Controller: LCB03)

Operation Manual

Revised January 2013

Notice:

OMRON products are manufactured for use according to proper procedures by a qualified operator

and only for the purposes described in this manual.

The following conventions are used to indicate and classify precautions in this manual. Always heed

the information provided with them. Failure to heed precautions can result in injury to people or dam-

age to property.

!DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury. Additionally, there may be severe property damage.

!WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury. Additionally, there may be severe property damage.

!Caution Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury, or property damage.

OMRON Product References

All OMRON products are capitalized in this manual. The word “Unit” is also capitalized when it refers to

an OMRON product, regardless of whether or not it appears in the proper name of the product.

The abbreviation “Ch,” which appears in some displays and on some OMRON products, often means

“word” and is abbreviated “Wd” in documentation in this sense.

The abbreviation “PLC” means Programmable Controller. “PC” is used, however, in some Program-

ming Device displays to mean Programmable Controller.

Visual Aids

The following headings appear in the left column of the manual to help you locate different types of

information.

Note Indicates information of particular interest for efficient and convenient opera-

tion of the product.

1,2,3... 1. Indicates lists of one sort or another, such as procedures, checklists, etc.

OMRON, 2002

by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission o

OMRON.

No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is con-

stantly striving to improve its high-quality products, the information contained in this manual is subject to change without

notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility

for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in

this publication.

About Loop Controllers

Loop Control Types, Functional Elements, and Versions

Loop Controller Types There are two types of CS/CJ-series Loop Controller: Separate Loop Control-

lers and Loop Controllers Pre-installed in CPU Units

Loop Controller Functional Elements

• Separate Loop Controllers consist of only the Loop Controller functional ele-

ment (i.e., the Loop Controller element).

• CPU Units with Pre-installed Loop Controller consists of a CPU Unit func-

tional element (i.e., the CPU Unit element) and the Loop Controller func-

tional element (i.e., the Loop Controller element).

Versions The functional elements (i.e., the CPU Unit element and Loop Controller ele-

ment) have versions.

Model Numbers and Functional Elements

The following table lists the Loop Controller product model numbers, the func-

tional element names for the CPU Unit elements and Loop Controller ele-

ments, and the versions of the functional elements.

Note Only Separate Loop Controllers have a unit version for the product model.

CPU Units with Pre-installed Loop Controllers do not have a unit version for

the product model.

Loop Controller

type Type name Product name Model PLC series and Unit type

Separate Separate Loop

Controller Loop Control Unit CS1W-LC001 CS-series CPU Bus Unit Loop Controller

Loop Control Board CS1W-LCB01/05 CS-series Inner Board Loop Controller

Pre-installed in

CPU Unit CPU Unit with

Pre-installed

Loop Controller

Process-control

CPU Unit CS1D-CPU@@P A one-Unit Loop Controller consisting of

an Inner Board pre-installed in a CS-

series CS1D-H CPU Unit

Loop-control CPU

Unit CJ1G-CPU@@P A one-Unit Loop Controller consisting of

an Inner Board pre-installed in a CJ-

series CJ1-H CPU Unit

Product name Product model

number Unit version of

the product

model

(See note.)

Configuration

CPU unit element Loop Controller element

CPU Unit

model with

same function-

ality

Functional ele-

ment unit version Functional

element

name

Functional

element

Loop Control

Unit CS1W-LC001 Pre-Ver. 2.0 --- LC001 Ver. 2.5

Loop Control

Board CS1W-LCB01 Ver. 2.0 to Ver.

3.6 --- LCB01 Ver. 2.0 to

Ver. 3.6

CS1W-LCB05 LCB05

Process-control

CPU Unit CS1D-CPU65P --- CS1D-CPU65H Ver. 1.0 or higher LCB05D Ver. 1.0

CS1D-CPU67P CS1D-CPU67H Ver. 1.0 or higher LCB05D

Loop-control

CPU Unit CJ1G-CPU42P --- CJ1G-CPU42H Ver. 3.0 or higher LCB01 Ver. 2.0 to

Ver. 3.6

CJ1G-CPU43P CJ1G-CPU43H Ver. 3.0 or higher LCB03

CJ1G-CPU44P CJ1G-CPU44H Ver. 3.0 or higher LCB03

CJ1G-CPU45P CJ1G-CPU45H Ver. 3.0 or higher LCB03

vii

Notation in this Manual

This manual uses the following notation.

• “Loop Controller” is used as a generic term to refer to the Loop Controllers in

general.

•“LCB@@” is used to refer to specific Loop Controller functional elements.

For example, the Loop Controller function element in a CS1W-LCB05 Loop

Control Board is the LCB05, so “LCB05” is used to refer to the Loop Control-

ler functional element. The Loop Controller function element in a CJ1G-

CPU44P Loop-control CPU Unit is the LCB03, so “LCB03” is used to refer to

the Loop Controller functional element.

• Model numbers are used to refer to specific Loop Controller models.

In the CX-Process Tool Operation Manual for version 3.2 or lower, functional

element names (LCB@@) are given as “Loop Control Board.” In the CX-Pro-

cess Tool Operation Manual for version 4.0 or higher, simply “LCB@@” is

used.

viii

Unit Version Notation on Products

Loop Control Boards A “unit version” has been introduced to manage CPU Units, Special I/O Units,

and Inner Boards in the CS/CJ Series according to differences in functionality

accompanying upgrades. This system applies to Units manufactured since

October 1, 2003. The unit version code is provided on the nameplate of the

product for which unit versions are being managed, as shown below for the

Loop Control Board.

The CX-Process Tool can be used to confirm the unit versions of Loop Control Boards in the Monitor

Run Status Window. After connecting the CX-Process Tool online, select Operation – Monitor Run

Status from the Execute Menu. Confirm the unit version in ITEM099 (MPU/FROM version display)

under from the System Common Block (Block Model 000) in the Monitor Run Status Window.

Version V1.50 and onwards must be indicated.

Product nameplate

Loop Control Board

Unit version

Example for unit version 1.5

ITEM Data name Data

099 MPU/FROM version indication V1.50

Functional Element Name and Version Code for Process-control CPU Units and Loop-

control CPU Units The functional element name and functional element version code for Pro-

cess-control CPU Units and Loop-control CPU Units are provided on the

nameplate as shown in the following diagrams.

Process-control CPU Units

Note CPU Unit elements for which no version code is provided are pre-Ver. 2.0

CPU Units.

Loop-control CPU Units

Confirming CPU Unit Element Versions with Support Software

CX-Programmer version 4.0 can be used to confirm the unit version using

either of the following two methods.

• Using the PLC Information

• Using the Unit Manufacturing Information (This method can also be used for

Special I/O Units and CPU Bus Units.)

Note CX-Programmer version 3.3 or lower cannot be used to confirm unit versions.

Process-control CPU Unit

Product nameplate

Functional element name for

CPU Unit element

Functional element name for

Loop Controller element

Nameplate on

left side of Unit

Functional element version code for

Loop Controller element

CS1D-CPU67P

PROCESS CPU UNIT

Lot No. 031001 0000

OMRON Corporation MADE IN JAPAN

LOOP CONTROL BOARD

Lot No. 031025 Ver.1.5

OMRON Corporation MADE IN JAPAN

CS1D-LCB05D

CPU Ver.1.0 LCB Ver.1.0

Functional element

version code for the

CPU Unit element

Functional element

version code for Loop

Controller element

Loop-control CPU Unit Unit model number

Product nameplate

Lot No.

Product model and functional

element name

Recommended location for

attaching version label

Functional element

version code for

CPU unit element

Functional element

version code for

Loop Controller

element

PLC Information

1,2,3... 1. If you know the device type and CPU type, select them in the Change PLC

dialog box, go online, and select PLC – Edit – Information from the

menus. If you do not know the device type and CPU type, but are connect-

ed directly to the CPU Unit on a serial line, select PLC – Auto Online to

go online, and then select PLC – Edit – Information from the menus.

2. In either case, the following PLC Information Dialog Box will be displayed.

Use the above display to confirm the unit version of the CPU Unit that is

connected online.

Unit Manufacturing Information

1,2,3... 1. In the I/O Table Window, right-click and select Unit Manufacturing Infor-

mation – CPU Unit.

2. The following Unit Manufacturing Information Dialog Box will be displayed.

Functional element name

for CPU Unit element

Functional element version

code for CPU Unit element

Altri manuali per SYSMAC CS Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Omron Unità di controllo

Omron

Omron CS1W-DRM21 Manuale utente

Omron

Omron CS1W-LC001 Manuale utente

Omron

Omron C500-SNT31-V4 Manuale utente

Omron

Omron SYSMAC CJ1W-NC113 Manuale utente

Omron

Omron SYSDRIVE 3G3FV-*-CUE Manuale utente

Omron

Omron CJ1W-PNT21 Manuale utente

Omron

Omron B5T-003 Manuale utente

Omron

Omron C200HW-MC402-E Manuale utente

Omron

Omron CJ1W-PRT21 Manuale utente

Omron

Omron NJ501-1400 Manuale utente

Omron

Omron STI CM Series Manuale utente

Omron

Omron C200H-MC221 - Manuale utente

Omron

Omron F3SP-B1P Manuale utente

Omron

Omron F3SP-B1P Manuale utente

Omron

Omron NX Series Manuale utente

Omron

Omron CS1W-MC221 - Manuale utente

Omron

Omron NX-SL series Manuale utente

Omron

Omron SYSMAC C500-NC222-E Manuale utente

Omron

Omron CS1W-MCH71 - Manuale utente

Omron

Omron SYSMAC CJ1W-NC113 Manuale utente

Omron

Omron SC20G2 Manuale utente

Omron

Omron SYSMAC C200H-ASC02 Manuale utente

Omron

Omron CS1W-NC113 - REV 02-2008 Manuale utente

Omron

Omron DRT1-DA02 Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente