ONFORU SK03 Manuale utente
English
1
Onforu SK03 Wireless Speaker
INSTALLATION GUIDE
Thank you for buying this product. Please read all safety information and operation
instruction before using the bluetooth speaker.
Onforu SK03 X 1
Speaker Holder for Bicycles X 1
0.6m USB Charging Cable X 1
Speaker Clips X 1
1m Audio Cable X 1
SAFETY INFORMATION
PACKAGE CONTENTS
A SPEAKER04
Read all instructions and save them for personal reference in the future.
Follow all directions for operating the product.
Do not set up near heat sources. Avoid radiators, stoves, and other devices that
produce heat. Avoid long-term exposure to sunlight and high temperatures.
There are 2 modes for this speaker: Bluetooth Mode, Audio Mode.
Please note: When the music is paused for 30 minutes, the speaker will enter into
Sleep Mode. To restart the speaker, please press .
English
2
Volume UP/Next: Long press the button to increase the volume. Short press the button
to move to the next song(only function in Bluetooth Mode).
Volume Down/Prev: Long press the button to lower the volume. Short press the button
to move to the previous song(only function in Bluetooth Mode)
AUX Input Port Power Port: DC 5V 1A
Indicator Light Microphone
DIMENSION
SPEAKER CONTROL PANEL AND PORTS
1
3
4 5
6 7
1
2
3
5
76
4
93mm/3.66in 82.5mm/3.24in 86mm/3.38in
42mm/1.65in
Play/Pause/Pairing/Power On/Power Off: Long press for one second to turn on when
speaker is off, and long press for one second to turn off when speaker is on; in Bluetooth
connection state, short press the button to play/pause; double-press the
button to forcibly disconnect the current connection and enter the Bluetooth pairing state.
2
English
3
Working Time: 10h battery life at
60% volume
Stand-by Time: ≥300 hours
Bluetooth Range: ≤10M
Frequency: 20HZ-20KHZ
Notice:
A. When the speaker is off, with no Audio cable connected, the speaker will enter
Bluetooth Mode directly after turning it on.
B. When the speaker is on, the speaker will enter the corresponding mode to the last
connected input(either Audio cable).
Charging Lead Time: 2.5-3 hours
Work Voltage: 5V / 1A
Wattage: 5W
IP Rating: IP65
Battery Capacity: 1200 mAh
PARAMETER
OPREATION INSTRUCTION
Step 1
Long press the , the speaker will be turned on
after hearing the prompt tone. The power indicator light will
turn blue and on for 3 seconds. Afterwards, the blue light
flashes quickly,indicating the speaker is entering Pairing
mode.
English
4
Step 2
Turn on the Bluetooth function on your phone or other Bluetooth devices and search for
our speaker which is named as A SPEAKER04. Connect with the speaker.
1, Search for A SPEAKER04 Speaker on your phone;
2, Connect with A SPEAKER04 Speaker;
3, Select playing music via A SPEAKER04 Speaker.
Step 3
After pairing successfully, there will be a prompt tone and the blue indicator light will be
on constantly.
Step 4
Play music on your phone. The blue indicator light will flash slowly when playing music.
and flash slowly when the music is paused.
Step 5
Bluetooth Devices
Distance≤10M
Indicator Light
How to connect the sepaker with a new device.
When the speaker is connected with a device, you can double press the play/pause/pairing
button to cut this current connection and enter pairing status.
English
5
Step 1
As picture 1 shows, pressing
the bulge of the holder, take out
the speaker before installing the
holder.
Picture 2
Picture 3
Folded Non-slip Mat 2
Non-slip Mat 2
Non-slip Mat 1
Step 2
As picture 2 shows, screw out the screws from the holder.
Step 3
ring, and tighten the holder with screw which has been taken out in step 2.
INSTALLATION OF THE HOLDER
A
Picture 1
English
6
The speaker will automatically connect to the last paired device, Theerfore, please ensure
BT function of the device is on, after turning the speaker on.
Pick up Phone Call: When the speaker is connected with phone, in case of a coming call,
you can pick up the call by short pressing the PLAY/PAUSE button.
CONNECTION MEMORY FUNCTION OF THE SPEAKER
TEL FUNCTION OF THE SPEAKER
Note:
mat 1 & 2 into the ring, pass the steering axle through the ring, then tighten the holder
with screw.
If the holder is still loose, you can fold the non-slip mat 2, and put the mat 1 & folded mat
2 into the ring, pass the steering axle through the ring, then tighten the holder with screw.
Picture 4
Step 4
After installing the holder, you can push the speaker
into the holder. Upon hearing a click, the speaker is
installed well.
English
7
Hang UP: When the speaker is connected with the phone, you can hang up by short
pressing the PLAY/PAUSE button.
Reject a Call: When the speaker is connected with the phone, you can reject a call by
long pressing the PLAY/PAUSE button.
Insert 3.5MM LINE IN cable via the AUX port to swift
to the AUX Mode.
AUX MODE
Audio Devices
AUX
In AUX Modes, when the music is playing, the blue indicator light will flash slowly, and in
the mute mode, the blue indicator light will be on constantly.
English
8
Français
9
Onforu SK03 Bluetooth Haut-Parleur
GUIDE D'INSTALLATION
Merci d'avoir acheté ce produit. Veuillez lire toutes les informations de sécurité et les
instructions d'utilisation avant d'utiliser le bluetooth haut-parleur.
Onforu SK03 X 1
Clips d’enceinte X 1
Support d’enceinte pour vélo X 1
0.6m USB câble rechargeable X 1
1m câble audio X 1
INFORMATION DE SÉCURITÉ
COMPOSANTS ET STRUCTURE
A SPEAKER04
Lisez toutes les instructions sur la notice et conservez-la pour référence personnelle
à l'avenir.
Suivez toutes les instructions pour utiliser le produit.
C’est interdit d’installer le produit près de sources de chaleur. Évitez les radiateurs,
cuisinières et autres appareils produisant de la chaleur. Évitez toute exposition
prolongée au soleil et aux températures élevées.
Il existe 2 modes pour cette enceinte: le mode Bluetooth, le mode AUX.
Remarque: lorsque la musique est suspendue pendant 30 minutes, le haut-parleur
passe en mode veille. Pour redémarrer le haut-parleur, veuillez appuyer sur .
Français
10
Volume Haussé / Suivant : Appuyez longuement sur le bouton pour augmenter le
volume. Appuyez brièvement sur le bouton pour passer à la chanson suivante
(fonction uniquement en mode Bluetooth)
Volume Baissé / Précédent: Appuyez longuement sur le bouton pour baisser le
volume.
Appuyez brièvement sur le bouton pour passer à la chanson précédente (fonction
DIMENSION
PANNEAU DE COMMANDE DE HAUT-PARLEUR ET PORTS
1
3
1
2
3
5
76
4
93mm/3.66in 82.5mm/3.24in 86mm/3.38in
42mm/1.65in
Lecture / Pause / Appairage / Marche / Arrêt:
Appuyez et maintenez pendant 1 seconde pour allumer à l'état éteint; encore appuyez et
maintenez pendant 1seconde pour éteindre à l'état allumé. En état de la connexion
Bluetooth , appuyez brièvement sur le bouton pour lire / mettre en pause, double-cliquez
sur le bouton pour déconnecter de force la connexion actuelle, entrez dans l'état
d'appariement de la recherche Bluetooth.
2
Indice
Lingue:
Altri manuali ONFORU Altoparlanti
