Onix CEW182 Manuale utente
Wireless Floating Pool Speaker
Model Number: CEW182
After Sales Support: 1300 886 649 (AU)
0800 836 761 (NZ)
INSTRUCTION MANUAL
2
After sales support: 1300 886 649 (AU) | 0800 836 761 (NZ)
Important Safety Instructions 3
Parts and Features 4
Battery Installation 6
Operating Instructions 7
FAQs 8
Contents
3
After sales support: 1300 886 649 (AU) | 0800 836 761 (NZ)
Important Safety Instructions
• Read all safety and operating instructions thoroughly before attempting to
operate this audio system.
• Install this product in accordance with the instructions.
• Do not expose the pool speaker to solvent.
• Do not place the pool speaker close to fluorescent light sources or neon light
fixtures.
• Do not expose the pool speaker to temperature or humidity extremes, direct
sunlight, excessive dust or vibrations.
• WARNING:To reduce the risk of fire or electric shock, do not expose the pool
speaker to rain or moisture for long periods without attention.
• Do not drop, apply excessive force to the controls, or put heavy objects on top of
the pool speaker.
• In order to protect the pool speaker, avoid microphone feedback, continuous
output from electronic musical instruments or distorted output from any signal
source.
• If cleaning is required, use a soft dry cloth or, if necessary, use a damp cloth
without any solvents.
• To prevent the risk of electric shock, do not attempt to repair, disassemble or
modify the product.There are no user-serviceable parts inside this unit. Any
modifications will void your warranty.
• We assume no responsibility for any radio or TV interference caused by
unauthorised modifications to this equipment.
• The product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
product by a person responsible for their safety.
• Young children should be supervised to ensure they do not play with the product.
Close supervision is necessary when any appliance is used by or near children.
Read this manual thoroughly before first use, even if you are familiar with this type
of product. Keep the manual in a safe place for future reference, along with the
completed warranty card, purchase receipt and carton. If applicable, pass these
instructions on to the next owner of the appliance.
Follow all instructions and heed all warnings in this manual.The safety precautions
enclosed herein reduce the risk of fire, electric shock and injury when correctly
adhered to.
4
After sales support: 1300 886 649 (AU) | 0800 836 761 (NZ)
Features
• Waterproof (complies with international waterproofing standard level IPX7)
• Open air transmission range of 30 metres
• LED illuminations for mood lighting
• Transmission frequency: 40.68MHz
• Single channel
• Output rating: 3W RMS x 1 (Class AB - audio amplifier)
• Speaker: 70mm diameter
• Power supply: Pool Speaker: 4 x C size batteries (not included)
Transmitter: 4 x AAA size batteries (not included)
• Transmission range: 30m (outdoors, line-of-sight)
Access the battery compartment
LED lights
Protective bumper
Power button and indicator
Audio speaker
LED mood light ON/OFF
Volume up/down buttons
Pool Speaker Parts List
Parts and Features
5
After sales support: 1300 886 649 (AU) | 0800 836 761 (NZ)
Wireless Transmitter Parts List
Power ON/OFF
(lift the antenna to power on the
device, fold the antenna back down
to turn it off)
Power LED indicator
DC Power input (6V, 100mA)
(Power adaptor is not included)
Audio input cable
Audio input
Parts and Features (Cont.)
6
After sales support: 1300 886 649 (AU) | 0800 836 761 (NZ)
Battery Installation
1. Unscrew the LED dome, as illustrated above, left.
2. Remove the screws to the battery compartment, as illustrated above, middle.
3. Insert 4 x C size batteries (not included), matching the polarity markings inside
the compartment, as illustrated above, right.
4. Reverse the above procedure to close the unit. Ensure the battery cover is
locked tightly.
5. Turn the LED dome tightly until it clicks to prevent water ingress.
1. Remove the screws to the battery compartment, as illustrated above, left.
2. Insert 4 x AAA size batteries (not included), matching the polarity markings
inside the compartment, as illustrated above, right.
3. Reverse the above procedure to close the unit.
Pool Speaker
Wireless Transmitter
7
After sales support: 1300 886 649 (AU) | 0800 836 761 (NZ)
MENU
Music
Videos
Volume
Volume
Photos
Podcasts
Extras
Settings
Connect your Music
• Connect the
transmitter to your
music source with the
cable provided.
• For best results set
the volume output of
your device to 75%.
• Switch on the power
on the pool speaker,
the power indicator will
illuminate.
• Adjust the volume (up/
down) to the desired level.
• Activate the transmitter
by flipping the antenna
into the upright position,
the power indicator will
illuminate.
• Extend the antenna to
the maximum length for
best transmission.
Activate the LED mood light and enjoy the
lighting effect in the pool.
Mood Light
Operating Instructions
8
After sales support: 1300 886 649 (AU) | 0800 836 761 (NZ)
The Power LED does
not light up.
•Ensurethebatteriesareinstalledcorrectly.
•Replacethebatteries,ifnecessary.
No sound. •Switchboththepoolspeakerandtransmitteroff,then
turn them on again to reset both units.
•Makesuretheaudiocableisconnectedsecurelytothe
music source.
•Iftoomuchwaterisretainedinthespeakergrill,gently
shake the device and allow the water to drain away.
•Ensurethecorrectmusicsourceisplaying.
•Thespeakervolumeissettoolow,adjustthevolumeto
an appropriate level, or adjust the volume on your source
device to maximum.
Distorted sound. •Thereiswaterretentioninsidethespeakergrill,gently
shake and drain it away.
•Thebatterycapacityislow,replacethebatteries.
•Thespeakeristoofarawayfromitstransmitter,movethe
two devices closer together.
Wireless interference. •Movethetransmitterandreceiverawayfromother
wireless devices.
•Makesuretherearenootherwirelessdevicesoperating
in between the transmitter and receiver.
Interference
problems.
To correct any interference:
•Reorientateorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentand
receiver.
Transmission
problems.
Normal operation should be possible within a distance
of 30m (outdoors, line-of-sight), but obstacles and other
electrical appliances may cause problems. Make sure no
potential obstacles (furniture, constructions, walls etc.)
are obstructing transmission and switch off any electrical
appliances that may cause disruption to the transmission
of radio waves.
FAQs
If none of the above help you solve the problem, consult a qualified TV technician
or contact the after sales support line.
Indice
Altri manuali Onix Altoparlanti
