Opticon LPN 1736 Manuale utente

User’s Manual

LPN 1736

Omni-Directional Laser Scanner

25-ULPNMU01-02

Keyboard Wedge Interface

USB Interface

RS232 Interface

8 Olympic Drive

Orangeburg, NY 10962

Tel 800.636.0090

Fax 845.365.1251

www.opticonUSA.com

Manual No. 25-ULPNMU01-01 LPN1736 Omni-Directional Laser Scanner

Contents

Getting Started 4

General Information 4

Unpacking 5

Parts of Scanner 5

Attaching Scanner to Adjustable Stand 5

Opticon Customer Service and Support 6

Programming Bar Codes 7

Start/Stop Programming Bar Code 7

Scanning Template 8

Chapter 1 Keyboard Wedge Interface 9

Installing and Setting Up 9

Reset All Defaults – Wedge 10

Keyboard Type Selection 10

Computer Type Selection 12

InterCharacter Delay 13

Chapter 2 RS232 Interface 16

Installing and Setting Up

Reset all Defaults

RS-232C Communication Parameters 17

HandShaking

Baud Rate

Data Bits / Stop Bits / Parity

Chapter 3 USB Interface 25

Installing and Setting Up

Reset all Defaults

Chapter 4 Programming the Scanner 26

Page 2

Manual No. 25-ULPNMU01-01 LPN1736 Omni-Directional Laser Scanner

Chapter 5 Programming Symbology Options 28

Enabling only a single symbology 28

Enabling an addition symbology 34

Setting Options

UPC-A 39

UPC-E 40

EAN-13 and -8 42

Code 39 45

Codabar 48

Code 128 49

2 of 5 50

MSI/Plessey 53

IATA 56

Chapter 6 Universal Programming Options 58

Redundant Decoding 58

Read Mode 60

Beeper Options 61

Prefix Options 66

Suffix Options 73

Direct Input: Keyboard Keys for prefix & suffix 80

Direct Input: Numeric Characters 103

Direct Input: Alpha Characters 106

Direct Input: Control Characters 124

Code Identifier 135

Sleep Mode 136

Appendices

A. Start/Stop Programming Bar Code

B. Scanning Template

C Default Settings

D. Settings for Ruby VeriFone

NOTICE

Opticon has taken every step to ensure that the information included in this

manual is accurate; however we reserve the right to change any specification at

any time without prior notice.

Page 3

Manual No. 25-ULPNMU01-01 LPN1736 Omni-Directional Laser Scanner

Getting Started

General Information

The LPN1736 Omni-Directional Laser Scanner projects a pattern of multiple scan lines

making it ideal for convenient, hands-free scanning. To scan or read a bar code, simply

place it within the scan pattern. There is no need to orient or position the bar code in

order to achieve a good read. The scanner automatically recognizes most common bar

code symbologies.

The LPN1736 supports the following interfaces

Keyboard Wedge (PS2 or AT/XT)

RS 232

USB Type A

Unpacking

Remove the scanner from its packaging and inspect it for damage. Save the carton and

packing material. If the scanner was damaged in transit, call the dealer or distributor

from whom you purchased it. If you purchased it directly from Opticon, call Opticon

Customer Service Dept. at 800-636-0090.

Page 4

Manual No. 25-ULPNMU01-01 LPN1736 Omni-Directional Laser Scanner

Parts of the Scanner

1. Reading Window. Present the bar code to

this window to scan. Keep the window clean

and never obstruct this window in any way.

2. Trigger Button. If the scanner is OFF,

depressing this button turns it ON. If the

scanner is in the “sleep mode” use this button

to “wake up” the scanner.

3. Good Read Indicator. Indicators flashes

when bar code has been successfully read.

This feature can be inactivated if desired.

4. Buzzer/Beeper. Beeps to indicate when a bar

code has been successfully read. Loudness is

adjustable.

5. Cable. Connects scanner to your computer or

host terminal.

6. Label. Contains Product Identification and

Serial Number. Do not remove.

Attaching Scanner to Adjustable Stand

An adjustable mounting stand is provided for the

LPN1736. The scanner can be use with or without this

stand. The stand may make it more convenient to scan

items of different sizes.

To mount the scanner to the stand, insert the plastic

screw through the hole in the base of the scanner into the

hole in the arm of the stand. Tighten. The cable clamp

on the base can improve cable management.

Page 5

Manual No. 25-ULPNMU01-01 LPN1736 Omni-Directional Laser Scanner

Opticon Customer Service and Support

If you have any questions or need assistance with installing or programming your scanner

call Opticon Customer Service Department at (800) 636-0090.

Before you call, record the model number of the scanner. This information is located on

the label near the connector end of the cable. Please have the scanner available plus

some bar codes to scan.

Page 6

Manual No. 25-ULPNMU01-01 LPN1736 Omni-Directional Laser Scanner

Programming Bar Codes

Opticon scanners are preprogrammed at the factory with default settings representing the

settings most commonly used by our customers. In most applications, the scanner will

work right out of the box without the need for additional programming.

If desired, you can change or program the settings of the scanner by reading special

programming bar code symbols. These special bar codes are contained in this manual.

In order to read these special programming bar codes, the scanner must first enter the

“programming mode”. This is accomplished by scanning the following bar code

symbol:

[[ 

Start/Stop Programming Mode

Scanning this programming bar code puts the scanner into the programming mode. The

scanner will beep continuously indicating that it is in programming mode. In this mode,

the scanner will only read special programming bar codes. It will not read regular bar

codes.

Now you can scan the specific programming bar code(s) you desire.

You will notice that there may be multiple programming bar codes on each page.

Because the scanner is omni-directional, it is possible that the scanner may

unintentionally read a different bar code than the one you desire. To prevent this, it is

important that you cover all the programming bar codes other than the one you wish to

scan. This can be accomplished by folding the page or covering the other bar codes with

your hand or sheets of paper.

You can also make a Scanning Template using the diagram on the following page. Using

a scissors or knife, cut out or remove the central section to create a window. Place this

template over the page of programming bar codes to that the desired bar code is visible in

the window but other bar codes are covered or hidden. In this way the scanner will only

read the bar code it sees in the window.

When you have scanned all the specific programming bar codes you need, you must

instruct the scanner to exit the programming mode. This is accomplished by scanning the

“Start/Stop Programming” again. This instructs the scanner to exit the programming

mode. The beeps will stop. The scanner is now ready to read regular bar codes.

Page 7

Manual No. 25-ULPNMU01-01 LPN1736 Omni-Directional Laser Scanner

Scanning Template for Programming

Cut and Remove this section

to create a window

Page 8

Manual No. 25-ULPNMU01-01 LPN1736 Omni-Directional Laser Scanner

Chapter 1

Keyboard Wedge Interface

This chapter contains information on setting up your scanner with a keyboard wedge

interface. With this type of interface the scanner is “wedged” between a keyboard and

the host computer or device. The scanner translates bar code information into keystrokes.

The host computer accepts these keystrokes as if they were typed on the keyboard. The

host computer does not know if keystrokes come from the keyboard or the scanner. It

treats all information it receives as if it came from the keyboard.

Installing and Setting Up

Connect the scanner as shown in the diagram. The scanner can be configured to work

with either an IBM AT/XT or PS2 computer and compatibles. AT is the default setting.

Connect the AC power supply into an electrical outlet. Insert the plug on the line cord

into the connector as show.

Page 9

Manual No. 25-ULPNMU01-01 LPN1736 Omni-Directional Laser Scanner

Reset All Defaults

Opticon scanners are preprogrammed at the factory with default settings representing the

settings most commonly used by our customers. In most applications, the scanner will

work right out of the box without the need for additional programming. At any time, you

can return a scanner to the factory defaults by scanning the “Start/Stop Programming

Mode” bar code, then scanning the “Reset All Defaults - Wedge” programming bar code,

followed by scanning the “Start/Stop Programming Mode” bar code again.

[[ 

Start/Stop Programming Mode

Scanning this programming bar code puts the scanner into the programming mode. The

scanner will beep continuously indicating that it is in programming mode. In this mode

the scanner will only read special programming bar codes. It will not read regular bar

codes. Now you can scan the specific programming bar code(s) you desire. Finally scan

the Start/Stop Programming again. This instructs the scanner to exit the programming

mode. The beeps will stop. The scanner is now ready to read regular bar codes.

Keyboard Type Selection

VC 

Reset All Defaults to IBM AT Keyboard Wedge (UB)

The IBM AT style of keyboard is the default setting for this scanner. If your keyboard

style is different scan the appropriate programming codes that follow:

Page 10

Indice

Altri manuali Opticon Lettore di codici a barre

Opticon

Opticon RFI3793B Manuale utente

Opticon

Opticon OPH 1004 Manuale utente

Opticon

Opticon OPR 3101 Manuale utente

Opticon

Opticon CRD-3301 Manuale utente

Opticon

Opticon NLB-1000 Manuale utente

Opticon

Opticon NFT 2100 Manuale utente

Opticon

Opticon LGZ 7225 Manuale utente

Opticon

Opticon OPN2003 Manuale utente

Opticon

Opticon OPL 2724 ZAPPER Manuale utente

Opticon

Opticon NFT 2200 Manuale utente

Opticon

Opticon OPL9813 Manuale utente

Opticon

Opticon OPH1000 Manuale utente

Opticon

Opticon OPI 2201 Manuale utente

Opticon

Opticon OPR 3001 Manuale utente

Opticon

Opticon 25-WEDGE-06 Manuale utente

Opticon

Opticon OPL 2724 ZAPPER Manuale dell'operatore

Opticon

Opticon RS232 Manuale utente

Opticon

Opticon RS-2006 Manuale utente

Opticon

Opticon Code Reader 2.0 Manuale utente

Opticon

Opticon OPN2004 Guida utente

Opticon

Opticon NLV-3101-HD Manuale utente

Opticon

Opticon OPR 3101 Manuale utente

Opticon

Opticon OPN2005 Manuale utente

Opticon

Opticon OPR 3101 Manuale utente

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente