SF 3345
15. Base
16. Weight
17. Fastener
18. Locking screw
ASSEMBLY:
1. Takethe base and tube partsfrom the packing box and loose the 4joint screws. Fix the tube on the
base platebythe joint screws
2. Placethe motor overthetube using the knob
3. Remove the partsfrom the packing.Separatethe front and rearguard iftheyare connected.
4. Remove the four positionscrewson the motor, offer up andalignthe rearguardwiththe four holes on
the motor (handletotopofthe fan)insert the fourposition screwsand tighten.
5. Loosen the setscrewonthe blade, slidethe bladeintothe shaftofthe motor, tighten the setscrew
ontothe flat ofthe shafttosecure the blade. Ensure that the bladedoes not foul the guards.
6. Assemblethe front guard tothe rearguard.Tighten the screwand nut,secure the retaining clips.
CLEANING INSTRUCTIONS
1. Besure tounplug the fanfrom electrical supplysourcebefore cleaning.
2. Plasticpartsshould be cleanedwithmild soapandadampclothor sponge. Thoroughlyremove soap
film withcleanwater.
3. Todisassembleeachpart,reverse the order ofassembly.
Disposalof old electricalappliances.
The Europeandirective 2002/96/ECon WasteElectricalandElectronicEquipment(WEEE),
requires thatold household electricalappliances mustnotbe disposedofinthe normal
unsortedmunicipalwastestream.Oldappliances mustbecollectedseparatelyinorder to
optimizethe recoveryandrecyclingofthe materialstheycontain, andreducethe impacton
humanhealthand the environment.
The crossedout“wheeledbin”symbolon the productremindsyou ofyour obligation, thatwhen you
dispose ofthe appliance,it must be separatelycollected.
Consumersshould contacttheirlocalauthorityorretailer for informationconcerningthe correctdisposalof
theirold appliance.
DECLARATIONOFCONFORMITY:
This devicecomplies with therequirements of theLow VoltageDirective2006/95/EC andthe
requirements of theEMC directive2004/108/EC.
