Oriental motor OPX-2A Manuale utente
HP-5049-3
Data setter OPX-2A
For the BLV Series
OPERATING MANUAL
Thank you for purchasing an Oriental Motor product.
This Operating Manual describes product handling procedures and safety precautions.
•Please read it thoroughly to ensure safe operation.
•Always keep the manual where it is readily available.
−2−
1 Safety precautions .............................. 3
2 Introduction ......................................... 4
3 Preparation .......................................... 5
3.1 Checking the product ............................... 5
3.2 Names and functions of parts .................. 5
3.3 How to read the display ........................... 6
3.4 How to read the LED indicators ............... 6
3.5 Types of operation modes ....................... 6
3.6 Basic operations of the OPX-2A .............. 7
3.7 Edit lock function ..................................... 8
3.8 Rewriting the driver’s non-volatile
memory .................................................... 9
4 Installation and connection of the
OPX-2A ............................................. 10
4.1 Location for installation .......................... 10
4.2 Installation method ................................ 10
4.3 Connecting to the driver .........................11
4.4 Error display on OPX-2A screen ............11
5 Screen transitions ............................. 12
6 Monitor mode .................................... 16
6.1 Overview of the monitor mode ............... 16
6.2 Monitored items ..................................... 16
7 Data mode ......................................... 19
7.1 Setting items .......................................... 19
7.2 Initializing operation data ....................... 19
8 Parameter mode ............................... 20
8.1 Parameter ID ......................................... 20
8.2 Setting example ..................................... 30
9 Test mode .......................................... 32
9.1 Overview of the test mode ..................... 32
9.2 I/O test ................................................... 32
9.3 JOG operation ....................................... 33
10 Copy mode ........................................ 34
10.1 Overview of the copy mode ................... 34
10.2 Downloading to the driver ...................... 35
10.3 Uploading to the OPX-2A ...................... 35
10.4 Verifying data ......................................... 36
10.5 Initializing driver data ............................. 36
Table of contents
−3−
Safety precautions
1 Safety precautions
The precautions described below are intended to prevent danger or injury to the user and other
personnel through safe, correct use of the product. Use the product only after carefully reading and fully
understanding these instructions.
Also read the "Safety precautions" sections in the USER MANUAL that came with the product you are
combining with the OPX-2A.
Handling the product without observing the instructions that accompany a
"Warning" symbol may result in serious injury or death.
Handling the product without observing the instructions that accompany a
"Caution" symbol may result in injury or property damage.
Note
The items under this heading contain important handling instructions that the
user should observe to ensure safe use of the product.
General
•Do not use the product in explosive or corrosive environments, in the presence of ammable gases,
locations subjected to splashing water, or near combustibles. Doing so may result in re, electric shock
or injury.
•Only qualied and educated personnel should be allowed to perform installation, connection, operation
and inspection/troubleshooting of the product. Handling by unqualied and uneducated personnel may
result in re, electric shock or injury.
•When the driver’s protective function is triggered, rst remove the cause and then clear the protective
function. Continuing the operation without removing the cause of the problem may cause malfunction
of the motor and driver, leading to injury or damage to equipment.
Repair, disassembly and modication
•Do not disassemble or modify the data setter. This may cause electric shock or injury. Refer all such
internal inspections and repairs to the branch or sales ofce from which you purchased the product.
General
•Do not use the motor, gearhead and driver in conditions exceeding the specications. Doing so may
result in electric shock, injury or damage to equipment.
Operation
•Provide an emergency stop device or emergency stop circuit so that the entire equipment will operate
safely in the event of a system failure or malfunction. Failure to do so may result in injury.
Disposal
•Dispose the product correctly in accordance with laws and regulations, or instructions of local
governments.
Introduction
−4−
2 Introduction
Only qualied personnel should work with the product.
Use the product correctly after thoroughly reading the section "1 Safety precautions" on page.3.
The product described in this manual has been designed and manufactured to be incorporated in general
industrial equipment. Do not use for any other purpose. Oriental Motor Co., Ltd. is not responsible for
any damage caused through failure to observe this warning.
Overview of the product
The OPX-2A is a data setter that lets you set operation data and parameters, perform monitoring, etc.
Use the OPX-2A properly and safely after thoroughly reading the "BLV Series USER MANUAL" and
understanding the basic operating procedures and other details.
Features of OPX-2A
The OPX-2A can be used to save data in addition to setting of operation data and parameters.
There are four destinations (data banks) to save data.
OPX-2A
Data bank 1
Data bank 0
Data bank 2
Data bank 3
Driver
Driver
Set operation data and parameters.
Up to 4 sets of operation data and
parameters can be saved.
Copy any one of the
4 sets to the driver.
The OPX-2A can be used for the following purposes:
•Operation data and parameters of the driver can be set.
•The operating status of the motor can be monitored.
•Operation data and parameters set in the driver can be saved to the OPX-2A.
•Operation data and parameters saved in the OPX-2A can be copied to other drivers.
Specications
Connection Mini DIN, 8 pins
External dimensions 96 (W)×72 (H)×21.5 (D) mm
[3.78 (W)×2.83 (H)×0.85 (D) in.]
Cable length 5 m (16.4 ft.)
Mass 0.25 kg (8.8 oz)
RoHS Directive
The products do not contain the substances exceeding the restriction values of RoHS Directive
(2011/65/EU).
−5−
Preparation
3 Preparation
This chapter explains the items you should know before using the OPX-2A.
3.1 Checking the product
Verify that the items listed below are included. Report any missing or damaged items to the branch or
sales ofce from which you purchased the product.
•Data setter OPX-2A .................................. 1 unit
•Information ................................................ 1 copy
3.2 Names and functions of parts
Display
This area shows the motor
position, operation data,
parameters, alarms, etc.
LED indicators
These LED indicators are used
to indicate the operation mode
of the OPX-2A and the driver
status.
Use this button to select data or
change the displayed item or
move to the lower level.
Use this button to change the
operation mode or move to the
upper level.
Use these buttons to change the selected item or set data and parameters.
Use these buttons to increase or decrease the value
or change the selected item.
Use these buttons to navigate through each data
or parameter to a desired digit.
Notation
In this manual, keys are denoted by symbols, such as .
In gures, a simplied illustration of the display and LED indicators is used, as shown below.
Preparation
−6−
3.3 How to read the display
The display consists of 7-segment LEDs. (The number "5" and alphabet "S" are the same.)
1234567890
A
• Numbers
+
-
• Signs
• Alphabets
B C D E F G H I J
K L M N O P Q R S T
U V W Y
3.4 How to read the LED indicators
When the operation mode is changed or an alarm or warning generates, a corresponding LED will be lit.
While the motor is operating or the edit lock function is enabled, the condition is also indicated by the
illumination of a corresponding LED.
Lit in the copy mode
Lit in the test modeLit in the parameter mode
Lit in the data mode
Lit in the monitor mode
Lit while an alarm is present
Lit while a warning is present
Lit while the motor is operating Not used
Lit while the edit lock function is enabled
Not used
Not used
3.5 Types of operation modes
The OPX-2A has multiple operation modes. The
operation mode will change every time the
key is pressed.
The display starts in the monitor mode when the
power is turned on.
When the operation mode is changed, the LED
indicator corresponding to the previous mode will
turn off and the one corresponding to the new
mode will be lit. Identify the present operation
mode based on the LED indicator currently lit.
Monitor mode
(MON)
Copy mode
(COPY)
Test mode
(TEST)
Parameter mode
(PAR)
Data mode
(DATA)
The mode changes
every time the key
is pressed.
−7−
Preparation
3.6 Basic operations of the OPX-2A
Use the six keys to set data and operate the motor.
Operation ow
The OPX-2A is operated according to the ow shown below.
Level 2: Item selection screen Level 3Level 1: Top screen in each mode
12
3
4
Use the
key to navigate
through the
modes.
Use the
key to move
to the lower level.
toUse
move to the
previous item.
toUse
move to the
next item.
Use the
key to move
to the upper level.
1. Use the key to select a desired operation mode appropriate for your intended
operation.
Example: If you want to use a function in the test mode, press the key to select the test mode
(indicated by a lit "TEST" LED).
The top screen of the test mode is displayed.
2. Press the key to move to the lower level.
3. Use the keys to select a desired item.
4. To move to the lower level, press the key. To return to the previous level, press the
key.
As explained above, use the key to navigate through the levels and use the keys to
select a desired item. This is the basic operation ow.
Note If the key is pressed while the driver performs the internal processing, the
screen cannot change to any lower level from the top screen, and "mEm-bUSY" is
displayed. Be sure to wait until all internal processing is completed, before pressing
the key.
Preparation
−8−
How to input values
As an example, how to change the rotation speed from "80" r/min to "1000" r/min is explained.
Basic operations
•Use the keys to increase/decrease the value or change the sign. Use the keys to
move to the digit you want to edit.
•If positive and negative values are differentiated, each value is preceded by a sign.
•The digit currently blinking can be edited.
1. First, change the 10’s place from "8" to "0."
Press the key once to move to the 10’s digit you want to edit.
Determined
Once
Twice
Twice
Once
2. Press the key twice to change the value to "0."
3. Next, change the 1000’s place from "0" to "1."
Press the key twice to move to the 1000’s digit you want to
edit.
4. Press the key once to change the value to "1."
5. After all digits have been changed, press the key to
determine the value.
All digits comprising the value blink for approximately 2 seconds.
Note If the value you have input is outside the setting range, "Error" will be displayed for
1 second. If this error display appears, input a different value that falls within the
setting range.
3.7 Edit lock function
Enable the edit lock function if you want to prevent operation data and parameters from being edited or
cleared.
Operation data and parameters cannot be changed or deleted while the edit lock function is enabled.
•Setting the edit lock function
Press the key for at least 5 seconds on the top screen in each mode.
The display will show "LocK" and the edit lock function will be enabled.
The "LOCK" LED in the LED indicator area will also be lit.
"LOCK" lit
•Canceling the edit lock function
Again, press the key for at least 5 seconds on the top screen in each
mode.
The display will show "UnLocK" and the edit lock function will be
cancelled.
The "LOCK" LED in the LED indicator area will turn off.
−9−
Preparation
3.8 Rewriting the driver’s non-volatile memory
Operation data and parameters are saved to the driver’s non-volatile memory. The non-volatile memory
can be rewritten approximately 100,000 times. The non-volatile memory will be rewritten after one of
the following operations is performed:
•Edit any operation data or parameter
•Download data from the OPX-2A to the driver
•Initialize driver operation data and parameters
Installation and connection of the OPX-2A
−10−
4 Installation and connection of the OPX-2A
4.1 Location for installation
The OPX-2A is designed and manufactured to be incorporated in equipment.
Install it in a well-ventilated location that provides easy access for inspection. The location must also
satisfy the following conditions:
•Inside an enclosure that is installed indoors (provide vent holes)
•Operating ambient temperature 0 to +40 °C (+32 to +104 °F) (non-freezing)
•Operating ambient humidity 85% or less (non-condensing)
•Area that is free of explosive atmosphere or toxic gas (such as sulfuric gas) or liquid
•Area not exposed to direct sun
•Area free of excessive amount of dust, iron particles or the like
•Area not subject to splashing water (rain, water droplets), oil (oil droplets) or other liquids
•Area free of excessive salt
•Area not subject to continuous vibration or excessive shocks
•Area free of excessive electromagnetic noise (from welders, power machinery, etc.)
•Area free of radioactive materials, magnetic elds or vacuum
•1000 m (3300 ft.) or less above sea level
4.2 Installation method
Using a metal plate of 1 to 3 mm (0.04 to 0.12 in.) in thickness, insert the OPX-2A into the mounting
hole from the front side and securely attach it.
92 +0.8
0 (3.62 )
+0.031
0
68 +0.7
0
(2.68 )
+0.028
0
• Dimension of mounting hole [mm (in.)]
Removing method
Press all of the four hooks provided on top and bottom of the
OPX-2A.
In this condition, press the OPX-2A forward to release.
Hook
Altri manuali per OPX-2A
3
Indice
Altri manuali Oriental motor Unità di controllo
Oriental motor
Oriental motor ASTEP AR Series Manuale utente
Oriental motor
Oriental motor ASTEP AR Series Manuale utente
Oriental motor
Oriental motor OPX-2A Manuale utente
Oriental motor
Oriental motor OPX-2A Manuale utente
Oriental motor
Oriental motor AR Series Manuale utente
Oriental motor
Oriental motor MSS W Series Manuale utente
Oriental motor
Oriental motor RKII Series Manuale utente
Oriental motor
Oriental motor PKP Series Manuale utente
Oriental motor
Oriental motor ASTEP AZ Series Manuale utente
Oriental motor
Oriental motor ASTEP AR Series Manuale utente
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
