oticon Acto CIC Manuale utente
INSTRUCTIONS FOR USE CIC / MIC / ITC / ITE
Thank you
Thank you for choosing our product as your means to better hearing.
To support your efforts, we have put great care and attention into making sure that your
new hearing instruments are of the highest quality and that they are easy to use and
maintain.
We recommend that you read this manual carefully to achieve the maximum benefit of
your new hearing instruments.
Congratulations on your decision to actively improve your hearing with today’s most
advanced hearing technology in the market.
Contents
Instrument View CIC/MIC 5a
Instrument View ITC 5b
Instrument View ITE 5c
Changing batteries 7
Turning your instruments ON and OFF 9
Left/Right ear marking 10
Inserting your hearing instruments 11
Programs (Optional) 12
Standby (Optional) 15
Volume Control by Push Button (Optional for ITC* only) 16
Volume Control by Wheel (Optional for ITE and ITC Power) 18
Telecoil (Optional) 21
Auto Phone (Optional) 22
Caring for your hearing instruments 24
Using your hearing instrument 30
5a
IMPORTANT NOTICE
Please familiarise yourself with the entire contents of this booklet before using your
hearing instru ments. It contains instructions and important informa tion about the use
and handling of your hearing instru ments and batteries.
Instrument View CIC/MIC
Microphone opening Battery door
Ventilation opening
Sound outlet + wax protection system
Ventilation opening
Battery size: 10
Pull-out string
Common problems and their solutions 36
Warranty Certificate 40
Warnings Yellow Pages
5b
Instrument View ITC
Battery size: 312
One or two microphone
openings
Battery door Ventilation opening
Ventilation opening
Sound outlet + wax protection systemPush-button (Optional)
IMPORTANT NOTICE
Open the battery compartment fully to allow air to circulate whenever you are not
using your hearing instrument, especially at night!
5c
IMPORTANT NOTICE
Open the battery compartment fully to allow air to circulate whenever you are not
using your hearing instrument, especially at night!
Battery size: 312
Instrument View ITE
Microphone openings Push-button (Optional)
Volume Control Wheel (Optional)Battery door
Ventilation opening
Sound outlet + wax protection system
7
Changing batteries
The correct battery size appears in the instrument overview in the first section of
this document. Batteries perform differently. Ask your hearing care professional for help
choosing a high quality battery for your hearing instrument.
A worn out battery should be removed immediately.
When the battery power is low, you will hear a series of short beeps. This indicates
that it is time to change the battery.
To replace the battery, follow these instructions:
• Open the battery door with your fingernail and remove the
old battery.
• Remove the sticky label from the + side of the new battery.
• Insert the new battery so that its + marking faces the +
sign printed on the battery door.
IMPORTANT NOTICE
Open the battery compartment fully to allow air to circulate whenever you are not
using your hearing instrument, especially at night!
8 9
Turning your instruments ON and OFF
Turn ON your hearing instrument by closing the battery
door completely with the battery in place.
When the battery door is closed the instrument will start up
by playing a jingle. This indicates that the battery is working
and the instrument is operating.
Turn OFF your hearing instrument by opening the battery
door with your finger nail.
To preserve the battery, make sure your hearing instrument
is switched off when you are not wearing it.
• Close the battery door. If you feel any resistance, you may have inserted the battery
incorrectly. Reinsert the battery and try again.
It will take a few seconds before the battery works to full capacity.
To assist the handling of the batteries, the magnet placed at the end of the tool can
be used.
OFF
ON
MultiTool
10 11
Left/Right ear marking
Hearing instruments are fitted to the uniqueness of each ear, which means if you have
two instruments then your left hearing instrument is shaped and programmed differently
from your right. That is why it is important to distinguish between the left hearing
instrument and the right.
In order to easily identify whether it is the left ear or right ear instrument, colour markings
may be applied.
Blue text or a blue dot marks the LEFT instrument.
Red text or a red dot marks the RIGHT instrument.
Inserting your hearing instruments
Place the tip of the hearing instrument in your ear canal.
Gently pull your ear and push the hearing instrument into
the ear canal, twisting slightly if necessary, following the
natural contour of the ear canal.
DO NOT use the battery door as a handle to insert or
remove your instruments. It is not designed for this
purpose.
12 13
Programs (Optional)
Your hearing instruments may have a push-button for switching between
different programs.
Push briefly on the button to switch to the next program.
A push will go forwards in the program cycle e.g from P1->P2.
When the highest numbered program is reached, the cycle
starts from program one again.
Your hearing instrument can have up to 4 different programs.
When switching between the different programs, your hearing instrument will beep.
The number of beeps will indicate which program you are using.
One beep, when you switch to program 1
Two beeps, when you switch to program 2
Three beeps, when you switch to program 3
Four beeps, when you switch to program 4
14 15
Below you can see a description of the programs available in your hearing instrument.
Prg. 1:
Prg. 2:
Prg. 3:
Prg. 4:
Using 2 instruments
If you have two instruments the push-button on one instrument can be programmed to
change the program on both hearing instruments (Binaural Coordination). This means,
when you adjust the program for one instrument, it automatically adjusts the other.*
Binaural Coordination enabled.
*Not available for CIC and MIC instruments.
Standby (Optional)
If your hearing instrument has a push-button, push the button for a minimum of
3 seconds to set the instrument in standby mode.
To reactivate the instrument, push the button brieftly again.
Use the standby function if you need to silence the instrument.
PUSH
3 sec
IMPORTANT NOTICE
Do not use the stand-by function as a switch off as the hearing instrument still draws
current from the battery in this mode.
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali oticon Apparecchio acustico
oticon
oticon Geno 1 Manuale utente
oticon
oticon More Manuale utente
oticon
oticon FittingLINK 3.0 Manuale utente
oticon
oticon CIC WL Fusion 2 Manuale utente
oticon
oticon miniRITE Alta2 Manuale utente
oticon
oticon CROS PX miniRITE R Manuale utente
oticon
oticon Intiga i Manuale utente
oticon
oticon EduMic Manuale utente
oticon
oticon Alta2 Pro Ti Manuale utente
oticon
oticon Phone 2.0 Manuale utente
oticon
oticon Chili BTE 13 SP Manuale utente
oticon
oticon minirite Manuale utente
oticon
oticon Oticon Xceed Series Manuale utente
oticon
oticon BTE 13 with Corda Manuale utente
oticon
oticon Alta CIC Manuale utente
oticon
oticon Ino Manuale utente
oticon
oticon Steamer Manuale utente
oticon
oticon STREAMER PRO Manuale utente
oticon
oticon Oticon Opn 2 miniRITE Manuale utente
oticon
oticon Sumo DM Manuale utente
