Oticon FittingLINK 3.0 Manuale utente

Instructions for use

Wireless

Programmer

FittingLINK 3.0

Introduction to this booklet

This booklet guides you on how to use and maintain your new

FittingLINK 3.0. Please read the booklet carefully including the

“Warnings” section. This will help you get the most out of your new

FittingLINK 3.0.

If you have additional questions about the use of your FittingLINK

3.0, please contact your supplier’s support function.

For your convenience this booklet contains a navigation bar to help

you navigate easily through the different sections.

About Startup Daily use Warnings More info

Intended use

FittingLINK 3.0 is intended as a programming interface to fitting

software, for wireless transfer of fitting data from the device

running the fitting software to the wireless hearing aids.

FittingLINK 3.0 is intended to be used by hearing care professionals.

Compatibility

FittingLINK 3.0 is compatible with Oticon hearing aids with 2.4 GHz

radio technology. It is backwards compatible and can be used with

FittingLINK WP-2. For backwards compatibility refer to FittingLINK

WP-2 “Instructions for Use” which can be

found on: www.oticon.global

INSTRUCTIONS FOR USE

Table of contents

About

Package contents 6

Product overview 7

Start up

Connect FittingLINK 3.0 to a PC 8

FittingLINK 3.0 and your fitting software 11

Daily use

How to use FittingLINK 3.0 12

Pairing FittingLINK 3.0 with 2.4 GHz wireless hearing aids 14

LED indicator 18

Taking care of your FittingLINK 3.0 19

Troubleshooting 20

Warnings

Warnings 24

More info

International warranty 26

Technical information 27

Instructions for use

Wireless

Programmer

FittingLINK 3.0

6About Startup Daily use Warnings More info

About

Package contents

You will find the following items in the package:

FittingLINK 3.0 Desk stand Instructions for Use

(this booklet)

Product overview

FittingLINK 3.0

Desk stand

LED indicator

Cable (2 m)

USB 2.0

8About Startup Daily use Warnings More info

Connect FittingLINK 3.0 to a PC

Before FittingLINK 3.0 can be used as your programming device

for wireless hearing aids, Genie 2 must be installed on your PC.

FittingLINK 3.0 must then be plugged into your PC in one of two

ways:

You can choose to plug FittingLINK 3.0 in the desk stand and

connect the USB cable from the desk stand to the PC [A]

Start up

We recommend that you keep FittingLINK 3.0 in the desk stand to

ensure optimal performance.

or you can choose to plug FittingLINK 3.0 directly into a USB port on

the PC [B].

When you have connected FittingLINK 3.0 and turn on your PC the

first time, a small pop-up window will appear on the screen indicat-

ing that the applicable driver is being installed. Let the installation

finish before you proceed.

The driver installation runs only the first time you turn on your PC

or in case you unplug FittingLINK 3.0 and afterwards plug it into a

different USB port than the one originally used.

About Startup Daily use Warnings More info

Altri manuali per FittingLINK 3.0

Indice

Altri manuali oticon Scheda madre

oticon

oticon FittingLINK 3.0 Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente