Outback CK578T Manuale utente
Photographs are not to scale.
Specifications subject to change
without prior notice.
Assembly and Operating Instructions for
Outback® Kettle Charcoal in Trolley
CK578T
WARNING
For outdoor use only - do not use indoors! Not for commercial use.
Read instructions before using the appliance. Failure to follow
instructions could result in death, serious bodily injury, and/or
property loss.
WARNING! Accessible parts may be very hot. Keep children and
pets away!
CAUTION: Do not use spirit or petrol for lighting or re-lighting! Use
only firelighters complying to EN1860-3!
WARNING! This barbecue becomes very hot. Do not move it during
operation!
Install this barbecue on a safe and even surface.
Any modification of the appliance, misuse, or failure to follow the
instructions may be dangerous and will invalidate your warranty.
This does not affect your statutory rights.
Retain these instructions for future reference.
Do not use the barbecue in a confined and/or habitable space e.g.
houses, tents, caravans, motor homes, boats. Danger of carbon
monoxide poisoning fatality.
2
Parts List
Quantity varies according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see the corresponding ‘Hardware Reference Diagram’.
Pre-Assembled Component
Body
CODE PART QTY KETTLE CHARCOAL IN TROLLEY
A1 Body 1
A2 Ash Tray 1
A3 Ash Tray Handle 1
A4 Charcoal Grill 1
A5 Cooking Grill 1
A6 Hood 1
A7 Air Vent 1
A8 Hood Handle Assembly 1
Upper
Trolley
B1 W orking Surface Assembly 1
B2 Trolley Handle 1
B3 Trolley Handle Sheath 2
B4 Rear Support Bracket 1
B5 Hood Rear Support 1
B7 Hood Front Support 1
Lower
Trolley
C1 Left Front Leg 1
C2 Left Rear Leg 1
C3 Right Front Leg 1
C4 Right Rear Leg 1
C5 Leg Front Support 1
C6 Leg Rear Support 1
C7 Leg Short Support 2
C8 Bottom Shelf 1
C9 Trolley Support 1
C10 Basket Bracket 2
C11 Basket 1
C12 Tool Hook 3
C13 Knife Holder 1
C14 Screen 1
C15 Axle 1
C16 Wheel 2
C17 Hubcap 2
Hardware
D1 M6x15 Bolt 30
D2 M6x40 Bolt 4
D3 ST4x10 Screw 11
D4 M6x8 Bolt 4
D5 Ø8.5 Washer 2
D6 M6x20 Bolt 6
D7 Ø6.0 Washer 4
D8 M6 Nut 4
D9 M6x65 Bolt 6
D10 Locknut 2
B6 Front Support Bracket 1
3
Parts Diagram
Quantity varies according to model purchased. Specifications subject to change without prior notice. For
more details on hardware, please see the corresponding ‘Hardware Reference Diagram’.
A5
A4
A7
A2
A3 A1
B1
B2
B3
B4
B5
B6
B7 C1 C2 C3 C4
C5
C6
C7
C8
C9
C10 C11
C12 C13
C14
C15
C16C17
D10
A8
A6
4
Hardware Reference Diagram
Specifications subject to change without prior notice.
D1
D3
D2
D8
D6
D4
D5
D7
D9
5
Assembly
IMPORTANT!
TOOLS NEEDED FOR ASSEMBLY: Medium size flat blade or Phillips/Crosspoint screwdriver,
adjustable spanner or metric spanner set.
Remove any internal components or packaging from the barbecue body.
Whilst every care is taken in the manufacture of this product, care must be taken during assembly in
case sharp edges are present.
Please read the Important Information section carefully before assembly and use of your
barbecue.
1
2
Attach the Trolley Support (C9) to the left front leg and right front leg using M6x15 Bolts
(D1x2pcs) and M6x65 Bolts (D9x2pcs) as shown.
Assembly the Legs (C1, C2, C3, C4) and Leg Supports (C5, C6, C7) together using the M6x15
Bolts (D1x8pcs), M6x65 Bolts (D9x4pcs) and M6x40 Bolts (D2x4pcs) as shown.
Note: The left legs are shorter than right legs, the front legs are attached velcro.
D1
C5
C7
C7
C1
C3
D9 D9 D2
D1
C1
REAR FRONT
C1
C9
D9 D1
6
3
Attach the Bottom Shelf (C8) to the Leg Front Support (C5) and Leg Rear Support (C6) using
M6x15 Bolts (D1x4pcs) as shown.
Unscrew the Locknuts (D10) from both ends of the Axle (C15). Slide the axle through the
corresponding holes in the left legs. Slide the Wheels (C16) over each end of the axle.
Secure the wheels into place with the locknuts. Place the Hubcaps (C17) onto the outsides
of the wheels.
4
C15
D11
C6
C5
D1
C8
C16
C17
D10
7
5
6
Attach the Tool Hooks (C12) to the Trolley Support (C9) using ST4x10 Screws (D3x3pcs)
as shown.
Attach the Basket Brackets (C10) to Leg Front Support (C5) and Leg Rear Support (C6) using
M6x15 Bolts (D1x8pcs) as shown.
D1
C10 C6
C5
C12
C9
D3
8
7
8
Attach the Knife Holder (C13) to the Trolley Support (C9) using ST4x10 Screws (D3x2pcs)
as shown.
Attach Trolley Handle (B2) and Trolley Handle Sheaths (B3) to the Working Surface
Assembly (B1) using M6x20 Bolts (D6x2pcs) and Ø8.5 Washer (D5x2pcs) as shown.
B3
D6
C13 C9
D3
B2
B1
D5
9
9
10
Attach the Working Surface Assembly (B1) to the trolley assembly using M6x15 Bolts
(D1x8pcs) as shown.
Attach the Rear Support Bracket (B4) to the Hood Rear Support (B5) using M6x8 Bolts
(D4x2pcs). Attach the Front Support Bracket (B6) to the Hood Front Support (B7) using
M6x8 Bolts (D4x2pcs) as shown.
D1
B1
B4
B5
B6
B7
10
11
12
Attach the hood support bracket assembly (B4, B6) to the left legs (C1, C2) using
ST4x10 Screws (D3x6pcs) as shown.
Carefully place the Barbecue Body (A1) into the working surface assembly and fix using
M6x20 Bolts (D6x4pcs), Ø6.0 Washer (D7x4pcs) and M6 Nuts (D8x4pcs) as shown.
D3
D6,D7,D8
Indice
Altri manuali Outback Griglia
Outback
Outback THG3710SS-3 Manuale utente
Outback
Outback Senator 6 Manuale utente
Outback
Outback Cook Dome 701 Manuale utente
Outback
Outback Excel 100 Manuale utente
Outback
Outback Modern Classic Trooper Manuale utente
Outback
Outback NEW Apollo 4 Manuale utente
Outback
Outback CD200 Manuale utente
Outback
Outback Omega Charcoal 100 Manuale utente
Outback
Outback TS201 Manuale utente
Outback
Outback Excel 100T Manuale utente
Outback
Outback Spectrum 2 Burner Manuale utente
Outback
Outback Modern Classic Trooper Manuale utente
Outback
Outback Spectrum Select Flat Bed 2 Manuale utente
Outback
Outback THG2216AW Manuale utente
Outback
Outback Gourmet 4 Manuale utente
Outback
Outback Excel 310 Manuale utente
Outback
Outback Charcoal Kettle CK575 Manuale utente
Outback
Outback Omega 150 Manuale utente
Outback
Outback Mayfair Manuale utente
Outback
Outback Party Select 6 Burner Gas BBQ FS5680 Manuale utente
