OV Solutions CT-213H-BTM32 Manuale utente
Digital Detection Module
Quick Guide
V1.03
1
1Packing List
No.
Name
Qty
Unit
1
Digital detection module
1
PCS
2
Screw kit
(There are two types and the actual screw kit shall
prevail. Screw kit 1: two M4x16 pan head screws,
two M4 nuts, and two M3x6 pan head screws;
screw kit 2: two M3x6 pan head screws)
2
Set
3
Special statement
4
PCS
2Product Overview
The digital detection module is a non-contact device for human body temperature
measurement. It has a simple and elegant appearance and features wide range, high
precision, low error, and long temperature measurement distance. It can connect to
a face recognition access control terminal through the RS485 interface. The module
supports temperature measurement and personnel information binding. It is
capable of rapidly identifying personnel information, taking the temperature, and
generating an alarm for people with abnormal temperature. In addition, it allows
setting a temperature threshold so as to strictly control the access permissions of
personnel. The module is applicable to application scenes requiring strict
temperature measurement such as access control and attendance check.
1Environmental Conditions
⚫Indoor use
⚫Altitude: < 2000m
⚫Environmental temperature: + 15 ℃~ + 30 ℃
⚫Relative humidity: < 95% RH
⚫Mains supply voltage fluctuations: ±10%
⚫Overvoltage category (except cord/plug-connected equipment): Ⅱ
⚫Pollution degree of the intended environment: the operational environment
should be with less dust to avoid the pollution of blackbody target. (Pollution
degree 2)
If the euipment is used in a manner not specified by the manufacturer, the
2
protection provided by the equipment may be impaired.
2Appearance and Size
Appearances and sizes vary with device type. The actual product shall prevail.
Appearance and Size 1
Appearance and Size 2
3Structure and Cable
Structures and cables vary with device type. The actual product shall prevail.
Structure and Cable 1
3
Structure and Cable 2
4Bracket Introduction
When the digital detection module is used in combination with a face recognition
access control terminal or face recognition terminal, a bracket (purchased
1
2
3
1 2
7寸人脸门禁一体机固定孔位
10寸人脸门禁一体机固定孔位
7寸人脸核验终端固定孔位
孔位说明
4-pin cable
Temperature
sensor
4-pin cable
Indicator
Temperature sensor
4
separately) is required for installation. The bracket is delivered with four M4x11
screws and two M4 wing nuts.
3Device Installation
3.1 Device Wiring
1Cable layout description
Before installing the digital detection module, plan the layout of the power cable.
For the diameter selection for the extension power cable, see the table below.
Hole description
Hole for fixing a 7-inch face recognition
access control terminal
Hole for fixing a 10-inch face
recognition access control terminal
Hole for fixing a 7-inch face recognition
terminal
5
Diameter Selection for Extension Power Cables
The device is powered by DC 12V/2A and the lower limit of the operating
voltage is DC 9V (12V–25%).
Wire Diameter
(mm)
0.8mm
(20 AWG)
1mm
(18 AWG)
1.25mm
(16 AWG)
1.63mm
(14 AWG)
Transmission
Distance (m)
18
37
58
99
2Wiring description
The figure below shows the wiring between the digital detection module and
different devices. For the wiring terminal of each device, see the operation manual
of the device or consult manufacturers.
3.2 Tools Preparations
⚫Antistatic wrist strap or antistatic gloves
⚫Marker
⚫Drill
⚫M8/M6 simple open-end wrench
⚫Phillips screwdriver
⚫Slotted screwdriver
Digital
detection
module
Power
input
VDD12V Red
GND Black +12V
GND
RS485
RS485_P Blue
RS485_N Brown
Face recognition access
control terminal/Face
recognition terminal
6
3.3 Installation Steps
NOTE!
Before installing the digital detection module, connect the cables between the
module and a face recognition access control terminal/face recognition terminal by
referring to section "Device Wiring" and sections related to the wiring in the quick
guide of the face recognition access control terminal/face recognition terminal.
1Wall mount
The figure below shows the process of installing the digital detection module on a
wall when the module is to be used in combination with a face recognition access
control terminal.
2Standing pole mount
The figure below shows the process of installing the digital detection module on a
standing pole when the module is to be used in combination with a face recognition
access control terminal.
7
The figure below shows the process of installing the digital temperature
measurement module on a standing pole when the module is to be used in
combination with a face recognition terminal.
M4x11 screws
1. Remove the
black panel.
2. Remove the four
screws on the back
and two screws at
the bottom, and
disassemble the
bracket.
M4 wing nuts
8
4Device Startup
1Device power-on
After the device is installed correctly, connect the power adapter (provided
separately) to the mains supply to start the device.
2Device configuration
Local configuration
When the digital detection module is used in combination with a face recognition
access control terminal, you can enable the temperature measurement function on
the Authentication Scene interface of the face recognition access control terminal.
Tap and hold the GUI for more than 3s. Enter the correct activation password to go
to the Activation Config interface.
Temperature value range: [30–45]
9
Configuration on the Web interface
You can also log in to the Web interface of the terminal and choose Setup >
Intelligent > Advanced Setting to enable the temperature measurement function.
3Device operations
When the temperature needs to be measured, a person needs to get close to occupy
the human shape on the screen and aim the forehead center at the red circle.
Normal temperature Abnormal temperature
Indice
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
