Overmax CamRoad-6.1 Manuale utente
CamRoad-6.1
USER MANUAL
English
THE APPEARANCE & DESCRIPTION
Name Function
1. [USB Interface]
Charger interface - Connect with micro USB
cable
. [GPS Interface]
When connected with GPS module, while
receiving regular GPS satellite signals, you can
record and display current driving location.
3. [ON/OFF] Press ON to turn the camera on; when the
camera is on, press OFF to turn it off.
4. [Reset]
Use it to reboot the system when it crashes or
the device doesn't respond.
5. [MIC] Thanks to it you can record sound.
6. [Display] .7” TFT High resolution LCD
7. [
Indicator Lam
p] Red when Charging; Blue when the device is
turned on. Blue light flashes during recording.
8. [Camera Lens] Thanks to it you can take videos & pictures
9. [Speaker] Performance sound & Playback sound
10. [Light] Supplementing light to enhance the brightness
in dark environments.
11. [OK] Record / Stop Recording / Take a photo/ OK
Confirm Button
1 . [HDMI] High Definition TV Connection via HDMI port.
Mini HDMI cable required.
13. [M] Short press to display Menu; Long press (3
seconds) to use it as the Mode button
In recording mode, short press to lock the file;
long press (3 seconds) to turn the MIC On/Off
14. [UP] Move up the selection in a Menu or Increase
Digital Magnification
15. [TF Slot] Supported TF Cards up to 3 GB
16. [Down]
Move down the selection in a Menu or
Decrease Digital Magnification
FEATURES & OPERATION
Setting
Insert the CLASS4 or higher speed TF Card into your Car DVR,
and mount it by the rear view mirror, or in any other desired position.
Then plug in the car charger. Now the Camcorder is ready to use.
Sta ting the Ca DVR
Press and hold [ON/OFF] button to turn on the car DVR, or
connect it to the car charger so that the device can start
automatically.
Note: During the engine start the current suddenly increases.
Although the device has the function of automatic start (when the
ignition is on) we cannot guarantee that the strong vehicle current will
not damage the DVR. We strongly recommend to first start the
vehicle, THEN connect the car charger and use the manual boot
mode.
Batte y Cha ging & USB Connection
1. The red charging indicator is on while charging.
. Plug in the USB cable to connect with computer, press [Up] &
[Down] to select "Storage" or "PC Camera" and press [OK] to confirm.
Then you can use the DVR as a "Removable Disk" or a "Webcam".
Switching Mode
This car DVR has three operating modes: video, photo &
playback. The default one is a video recording mode (when you
power the device on). To switch between the modes short press [M]
button.
Reco ding videos
1. Press [OK] to record. Use [Up] & [Down] to change the digital
zoom. Press [OK] again to stop recording.
. The Video Menu Settings: in the standby mode, press the [M]
button, then use [Up] & [Down] in menu to select a given feature and
press [OK] to confirm & save your settings.
Here you can set the following video features:
Resolution: optional: 1080HFD / 7 0P / WVGA / VGA.
Loop recording: Choose between mins / 3mins / 5mins
Select OFF to stop the loop recording function.
WDR: Automatically on, no need to set.
Exposure Compensation:
+ .0 +5/3 +4/3 +1.0 + /3 +1/3 +0.0 -1/3
- /3 -1.0 -4/3 -5/3 - .0.
Motion Detection: the DVR needs to be connected with a car
charger when running this mode. When this mode is on, the device
starts recording automatically when there is an object movement. It
automatically stops recording after the object cease to move for 10
seconds.
Video Audio: on – both audio and video recording; off - only
video is recorded (without sound). Long press [M] to switch video
audio mode while recording.
Date Mark: ON or OFF the date mark.
G-Sensor: Choose between High / Mid / Low. In case of a
violent collision of the car the device can start the collision sensing
function. The video file from the accident will be automatically locked
(it won't be covered or deleted). During a Low mode this function is
off.
Taking photos
1. During a video mode press [M] to switch the device into a photo
mode. Press [REC] button to take photos. Press [Up] & [Down] to
change the digital zoom.
. Photo menu settings: Under photo mode, press [M], then use
[Up] & [Down] to move the selection, and press [REC] to confirm &
save your settings. Here you can set the following photo features:
Photo taking modes: single shot (default) / timer seconds /5
seconds /10 seconds.
Resolution: 1 M / 10M / 8M / 5M / 3M / M HD / VGA / 1.3M .
Image Quality: Good / Standard / Economy.
Sharpness: strong / standard / soft.
White balance: automatic / day / cloudy / tungsten lamp and
fluorescent lamp.
Color: Normal / Black and White / Sepia
ISO: automatic / 100 / 00 / 400.
Exposure compensation:+ .0 +5/3 +4/3 +1.0 + /3 +1/3 +0.0
-1/3 - /3 -1.0 -4/3 -5/3 - .0.
Anti-shake: on or off.
Date label: three optional choices: display date / display date and
time / off.
Playback Mode:
1. During recording mode: press [M] twice to enter the playback
mode. Press [Up] & [Down] to browse files.
. Browsing images:
1) Press [Up] & [Down] to browse files.
) Deleting browsed files: press [M] key to show the menu, then
press [Up] and [Down] to choose "Delete" and press the [OK] key to
show the confirmation dialog box. Select "delete" again (or "delete
all") and press [OK] to confirm the operation.
3) Protecting browsed files: press [M] to show the menu, then
press [Up] and [Down] to choose the protection function and press
[OK] button. A dialog box will pop up in which you can choose to lock
or unlock the current file or all files. Press [OK] to confirm the
operation.
4) Slide show: when browsing files, press [M] key to show the
menu, then press [Up] and [Down] to select "slide show" and press
[OK] key. A dialog box will pop up in which you can press [Up] and
[Down] to select the slide duration. Then press [OK] key to confirm
the operation. After opening a slide show set the slide duration and
the photos will be displayed automatically.
Note: to delete the locked files you must unlock them first. Unlocking
method is the same as the locking one.
3. Video playback:
1) Select the video file and press [OK] to play it. Press [OK] to
pause the playback. When playing a video, press [Up] and [Down] to
rewind and fast-forward the playback.
) Stop the playback and press [M] button to show the options
menu, where you can remove or protect the file as well as start slide
show.
System settings
Turn the device on and press the OK button to stop recording.
Then short press the M button once (long press to change the mode).
press the OK to open that option.
Menu
Options
Selection
Options
Option Desc iption
Set
Date/Time
Adjust fields:
Day/Month/Year
and
Hour/Minute/Secon
d
Use this option to set the date
and time of the device. Should
the device is not used for a long
time and the battery runs
completely flat, then the
date/time needs to be set
again.
Auto Powe
off
OFF / 1 minute / 1
minutes / 3 minutes
Use it to adjust the time to
automatically power off
Language English / French /
Spanish /
Portuguese /
German / Italian /
Polish / Chech /
Slovak / Russian /
Romanian /
Hungarian /
Estonian
Choose a menu language.
TV Mode Select [NTSC/PAL] For older television sets
or monitors which cannot
auto select the television
display
system or colour
information, select
“PAL”
Light
F equency
Select
[50HZ/60HZ]
For older television sets or
monitors which cannot auto
select the refresh rate
frequency, select 50Hz
Sc een
Select [Off/3 Mins/5
Use it to adjust an
Save Mins/10 Mins automatic screen saver
activation time.
Image
Rotation
Select [Off / On] Use this feature to flip the screen
180° depending on
your mounting
requirements
Fo mat
Format SD Card
[OK/Cancel]
Select “OK” to format the Micro
SD card.
Warning: formatting the card will
erase all the data stored on it.
Default
Settings
Select [OK/Cancel] Select OK to return the
device settings back to the
original factory settings.
Fi mwa e Ve sion View the current car DVR
software version.
Othe Optional Functions
HDMI Output:
Use a special HD output cable to connect the car DVR to the display
with HDMI input interface.
The two connection ways above allow you to display the images
and videos (also with sound) captured by your car DVR.
Note: This machine support dual-channel output. Please use
tri-colour AV output cable. The HDMI display could be used only after
1080P option selection.
GPS T acking Function:
1. Make sure that the machine you bought has a GPS vehicle
Indice
Altri manuali Overmax Telecamera da cruscotto
Overmax
Overmax camroad 4.6 Manuale utente
Overmax
Overmax Camspot 4.9 Pro Manuale utente
Overmax
Overmax CamRoad2.3 Manuale utente
Overmax
Overmax Motocom 3.0 Manuale utente
Overmax
Overmax Camroad Mirror Manuale utente
Overmax
Overmax OV-CAM-03 Manuale utente
Overmax
Overmax CamRoad 4.1 Manuale utente
Overmax
Overmax CamRoad 4.5 Manuale utente
Overmax
Overmax CamRoad 2.2 Manuale utente
Overmax
Overmax OV-CAM-02 Manuale utente
