Panasonic KX-TDA15 Manuale utente
Model No.
KX-TDA15
Thank you for purchasing a Panasonic Hybrid IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
PSMPR Software File Version 4.0000 or later
Hybrid IP-PBX
Getting Started
2 Getting Started
Table of Contents
1 Before Installation .................................................................................. 3
1.1 System Connection Diagram ...........................................................................................4
1.2 Unpacking..........................................................................................................................5
2 Installation............................................................................................... 7
2.1 Opening/Closing the Covers ............................................................................................8
2.2 Installing the SD Memory Card ......................................................................................10
2.3 Installing the Optional Service Cards ...........................................................................10
2.4 Installing the Trunk Cards ..............................................................................................13
2.5 Installing the Extension Cards (DLC8/SLC8)................................................................14
2.6 Connecting Extensions ..................................................................................................15
2.7 Frame Earth Connection ................................................................................................15
3 Starting the Hybrid IP-PBX .................................................................. 17
3.1 Starting the Hybrid IP-PBX.............................................................................................18
4 Customising the Hybrid IP-PBX .......................................................... 21
4.1 Connecting the PC..........................................................................................................22
4.2 Installing the KX-TDA30 Maintenance Console ...........................................................23
4.3 Programming the Hybrid IP-PBX ...................................................................................23
5 Confirming the Connection ................................................................. 29
5.1 Making Calls ....................................................................................................................30
Getting Started 3
Section 1
Before Installation
1.1 System Connection Diagram
4 Getting Started
1.1 System Connection Diagram
*1The Hybrid IP-PBX has 4 Super Hybrid Ports, one BRI2 card, and one EXT-CID card pre-installed.
*2ITSP: Internet Telephony Service Provider
Radio
Amplifier Pager/Speaker
CTI Server
Station Message
Detail Recording (SMDR)
PC
SLT Fax Machine
for Single Line Device
SLC8
(KX-TDA3174)
ECHO8
(KX-TDA3166)
EXT-CID
*
1
Telephone
Company
Hybrid IP-PBX
4 Super Hybrid Ports
*
1
Main Board
Analogue
Trunk
BRI2
*
1
(KX-TDA3280)
BRI1
(KX-TDA3283)
LCOT2
(KX-TDA3183)
ISDN BRI Line
ISDN BRI Line
(Digital Trunk)
(Digital Trunk)
ISDN BRI Line
(Digital Trunk)
DPH4
(KX-TDA3161)
DPH2
(KX-TDA3162)
Doorphone & Door Opener
External Sensor/
External Relay Device
MSG2
(KX-TDA3191)
SVM2
(KX-TDA3192)
SLT Wireless
Phone
DPT DSS
Console
Voice
Processing
System
PT-interface CS PS
for Single Line Device,
DPT/Analogue
Proprietary Telephone
(APT), DSS Console,
and PS
PC
KX-T7636/
KX-T7633
APT
PCKX-T7636/
KX-T7633
DSS
Console
DPT
Voice
Processing
SystemPT-interface CS PS
for Digital Proprietary
Telephone (DPT),
DSS Console, and
Portable Station (PS)
DLC8
(KX-TDA3172)
IP-EXT4
(KX-TDA3470)
LAN
IP-PT IP Softphone
Private
IP Network
Router
IP-GW4
(KX-TDA3480)
PC
LAN
CTI Server
KX-T7600
DPT KX-T7600
DPT
SIP-DSP4
(KX-TDA3451)
SIP-GW4
(KX-TDA3450)
PC
LAN
ITSP
*
2
Network
ADSL
Modem
WAN
1.2 Unpacking
Getting Started 5
Note
In this manual, the suffix of each model number (e.g., KX-TDA15NE) is omitted unless
necessary.
1.2 Unpacking
Check the package contents.
Main Unit × 1
CD-ROM (including manuals, etc.) × 1
AC Cord* × 1 AC Adaptor × 1 Screw × 5
Washer × 5 Mini Plug (for pager and music
source) × 2
SD Memory Card × 1
Main Strap × 1 Strap (for the pre-installed
BRI2 card) × 1
Optional Card Label Sheet × 1
* The type of the AC cord may vary depending on the country/area of use.
1.2 Unpacking
6 Getting Started
Necessary tools (not supplied):
Telephone cable for extension connection:
The maximum length of the cable may vary depending on the type of the cables and installation
conditions.
An RS-232C or USB cable for PC connection
Connectors (RJ45/RJ11)* for trunk and extension connections
Note
Use a twisted pair cable for the RJ45 or RJ11 connector.
Diameter of cable
(ø 0.4 mm to ø 0.6 mm)
Maximum length of cable
ø 0.5 mm 1128 m for SLT
ø 0.5 mm 720 m for KX-T7600 series
ø 0.5 mm 229 m for other DPT, APT and DSS Console
* The connector type may be RJ45 or RJ11 depending on the country/area.
Getting Started 7
Section 2
Installation
2.1 Opening/Closing the Covers
8 Getting Started
2.1 Opening/Closing the Covers
Opening the Covers
1. Pull the slide button to the right and, holding it, slide the cable cover upwards. Then turn the cable
cover slightly to remove it.
2. Remove the three screws.
3. Holding the protrusions on both sides of the front cover, swing the cover open.
Slide Button
Cable Cover
Screw
2.1 Opening/Closing the Covers
Getting Started 9
Closing the Covers
1. Close the front cover, then tighten the three screws.
2. Attach the rear hooks on the cable cover to the main unit, then swing the cable cover closed so
that the front hooks fit in place.
3. Slide the cable cover down until it locks.
Screw
Cable Cover
2.2 Installing the SD Memory Card
10 Getting Started
2.2 Installing the SD Memory Card
The SD Memory Card contains software for all the processes of the Hybrid IP-PBX and all the
customer data. The SD Memory Card must be inserted before startup.
CAUTION
Do not remove the SD Memory Card while power is supplied to the Hybrid IP-PBX. Doing so may
cause the Hybrid IP-PBX to fail to start when you try to restart the system.
2.3 Installing the Optional Service Cards
Slot Position
*1Slots 10 and 11 accept only cards which do not have external ports. Therefore, these slots do
not have removable cover plates.
*2Slot 08 contains the pre-installed EXT-CID card.
*3Slot 02 contains the pre-installed BRI2 card.
*4Slot 01 contains the pre-installed Super Hybrid Ports. No optional service card can be installed.
SD Memory Card
Slot Cover
SD Memory
Card
02*3
03
04
05
06
07
08*2
09
10*1
11*1
01*4
Altri manuali per KX-TDA15
10
Indice
Altri manuali Panasonic Centralino
Panasonic
Panasonic KX-TVS50 - 2 Port Voicemail System Manuale utente
Panasonic
Panasonic KX-NCP500 Manuale utente
Panasonic
Panasonic KX-TDE100 Manuale utente
Panasonic
Panasonic KX-TDE100 Scheda tecnica
Panasonic
Panasonic KX-TDE100 Manuale utente
Panasonic
Panasonic KX-TDA600AL Manuale utente
Panasonic
Panasonic KX-NS1000 Manuale utente
Panasonic
Panasonic KX-T7625 - Digital Proprietary Speakerphone 24... Manuale utente
Panasonic
Panasonic KX-NS300 Guida all'installazione
Panasonic
Panasonic HYBRID IP-PBX KX-TDA100 Scheda tecnica
Panasonic
Panasonic KX-TDA100D Manuale utente
Panasonic
Panasonic KX-TDE100 Manuale utente
Panasonic
Panasonic HYBRID IP-PBX KX-TDA100 Scheda tecnica
Panasonic
Panasonic KX-TA308 Manuale utente
Panasonic
Panasonic KX-TDE100 Manuale utente
Panasonic
Panasonic KX-T7625 - Digital Proprietary Speakerphone 24... Manuale utente
Panasonic
Panasonic KX-NS1000 Manuale utente
Panasonic
Panasonic KX-TEB308 Manuale utente
Panasonic
Panasonic KX-TD1232CE Istruzioni per l'installazione e il funzionamento
Panasonic
Panasonic KX-NCP500 Manuale utente
