PanoSpace I Manuale utente
USER MANUAL
FUN EASY 3D PRINTING
PanoSpace I
1
PANOSPACE
Thank you for purchasing our PanoSpace I 3D Printer. We pride ourselves in
having the most innovative products on the market with cutting edge technology
that is easy to use. We are dedicated to making the most enriching learning
experiences for you and hope you have as much fun using it as we did creating
it!
This user manual contains safety rules and instructions for printing, adjustments
and maintenance. It shows you how to use the 3D printer properly to extend its
lifetime. Please read this manual thoroughly and make sure you follow all the
instructions.
Declaration
■PanoSpace USA has thoroughly proofread the content of this user manual.
■PanoSpace USA will not be liable for typos and missing contents.
■This user manual is subject to change without notice due to improvements
of our product and manual.
■This user manual is used for helping the user operate the 3D printer correctly.
It doesn’t illustrate hardware and software congurations.
■If there is inconsistency between the illustration in this user manual and
the actual product, the actual product shall govern.
Copyright
© 2015-2017 by PanoSpace USA. All rights reserved.
2
Table of content
PANOSPACE ...........................................................................................1
Declaration ...............................................................................................1
Copyright ..................................................................................................1
I. First use................................................................................................5
1.1 Note....................................................................................................5
1.2 Safety .................................................................................................5
1.3 Product Appearance...........................................................................6
1.4 Accessories ........................................................................................6
1.5 Technical Specications.....................................................................7
1.6 Use .....................................................................................................9
1.7 Load Filament.....................................................................................10
1.8 Print 3D Models..................................................................................11
1.9 Post-Process for Printed Objects .......................................................12
II. Learning To Use The Touch Screen .................................................13
2.1 Preheat...............................................................................................13
2.2 Print 3D Models..................................................................................13
2.3 Load Filament.....................................................................................13
2.4 Unload Filament .................................................................................13
2.5 Adjust Level of Print Bed ....................................................................14
2.6 Adjust Gap..........................................................................................16
3
2.7 Settings...............................................................................................16
III. PanoBuilder .......................................................................................18
3.1 Download and Install PanoBuilder......................................................18
3.2 Connecting Printer to PanoBuilder .....................................................18
3.3 Load Digital 3D Model Files into PanoBuilder ....................................19
3.4 Print 3D Models..................................................................................20
3.5 Edit Digital 3D Models ........................................................................24
3.6 Load Filament.....................................................................................26
3.7 Unload Filament .................................................................................26
3.8 Adjust Level of Print Bed ....................................................................26
3.9 Adjust Gap..........................................................................................27
3.10 Adjust Printer....................................................................................27
3.11 Print 3D Models on SD Card ............................................................28
3.12 Calibrate Printer................................................................................28
3.13 Stop Printer.......................................................................................28
3.14 Settings.............................................................................................29
3.15 Update PanoBuilder and Upgrade Firmware....................................29
IV. Maintenance ......................................................................................30
4.1 Regular Cleaning................................................................................30
4.2 Troubleshooting..................................................................................31
V. Support and Services ........................................................................32
5
I. First use
1.1 Note
■ Please read this chapter carefully before rst use.
■Please follow all the safety rules in this manual.
■Do not repair or modify PanoSpace I 3D Printer, doing so will void the warranty.
■ Use of lament and / or components produced by other companies may void
the warranty.
1.2 Safety
■Use the printer in a well ventilated place.
■Do NOT use or store the printer under moist conditions.
■Use the power adaptor supplied by PanoSpace. Power adaptors from other
manufacturers might damage the printer or cause a re.
■Children under 12 using this product should be supervised by a responsible
adult. Printed objects or small parts may present a choking hazard and
should be kept away from young children.
■Do NOT touch the extruder, print bed and all other moving parts while heating or
printing.
■Do NOT use the printer for a long period of time when not present.
■Do NOT cleanup or move the printer when power is on.
■Do NOT use cleaning solvents or solutions to clean the printer. To clean the
printer, use a clean, slightly damp cloth.
■ When removing excess lament, wearing gloves and goggles is suggested.
6
1.3 Product Appearance
Front Back Side
1.4 Accessories
Power Adaptor USB Cable Filament Roll
Teflon Tube Glue Stick Scraper Adjustment Tool
Note: The appearance of some components might be different from the pictures above.
FILAMENT HOLDER COVER
TOP LID
EXTRUDER
PRINT BED
TOUCH SCREEN
POWER SWITCH
POWER SOCKET
USB SOCKET
SD CARD SLOT
7
1.5 Technical Specifications
Printing
Printing Technology: PJP (Plastic Jet Printing)
Max Build Dimensions: 150 mm x 150 mm x 150 mm
(about 6 inch x 6 inch x 6 inch)
Layer Resolution: 0.1 - 0.4 mm
Printing Filament: PLA
Filament Diameter: 1.75 mm
Extruder Quantity: 1
Nozzle Diameter: 0.4 mm
Max Moving Speed: X and Y axis 150 mm/s
Software
Application: PanoBuilder
Operating System: Windows 7+; Mac OS X 10+
File Format: 3MF, STL, PLY
Connection: USB cable, microSD card
Mechanics
Chassis: Steel
Body: ABS
Print bed: Glass
Motor: Stepping motor
8
Electronics
Screen: 3.2 inch resistor touch screen
Input: AC 100 - 240 V, 2 A, 50 / 60 Hz
Output: DC 24 V, 5 A
Operation and Storage Requirement
Printer: 15 - 26 °C (59 - 79 °F), < 70% RH (relative humidity)
Filament: 15 - 26 °C (59 - 79 °F), 25% - 45% RH (relative humidity)
Note: Keep filament away from moist conditions. PLA absorbs water in the air. It might affect print quality. Once
the filament package is opened, it must be used within a reasonable time.
Dimensions and Weight
Dimensions: 407 mm x 288 mm x 333 mm
(16 inch x 11.3 inch x 13.1 inch)
Net Weight: 8.4 kg (18.5 lb)
Indice
Altri manuali PanoSpace Stampante 3D
