Paradox Esprit 616 Manuale utente

616, 626, 636 & 646

Keypads

User’s Manual

Esprit Keypads 1

TABLE OF CONTENTS

1.0 BASIC OPERATION ....................2

2.0 ACCESS CODES .........................4

3.0 ARMING & DISARMING ..............6

4.0 PANIC ZONES ..........................13

5.0 KEY ACCESS PROGRAMMING .14

6.0 ADDITIONAL FEATURES ..........15

7.0 TROUBLE DISPLAY ..................16

8.0 FIRE ALARM OPERATION ........18

9.0 SYSTEM MAINTENANCE ..........20

10.0 SYSTEM CHECKLIST .............21

2 User’s Manual

1.0 BASIC OPERATION

The Esprit 616, 626, 636 and 646 keypads all

function in the same way, but display the visual

feedback differently.

1.1 VISUALFEEDBACK

The numbers, symbols, lights and keys on the keypad

communicate the status of your system as described

below.

Figure 1: Overview of the 616 & 626 Keypads

Esprit Keypads 3

Figure 2: Overview of the 636 & 646 Keypads

4 User’s Manual

1.2 ZONES

The Esprit control panel can support up to 24 zones.

When a zone is opened or breached its

corresponding key will light up on the keypad. For

example, if zone 5 were to open, the 5 key will light up

on the keypad. The Esprit’s keypads will show the

status of the zones through keys 1 to 12. By default,

keys 1 to 12 will display the status of zones 1 to 12.

Press the [2ND]button and keys 1 to 12 will now

display the status of zones 13 to 24 respectively.

1.3 PARTITIONING

Your Esprit system is equipped with a partitioning

feature that can divide your alarm system into two

distinct areas (System A and System B). User access

codes can arm or disarm one system or both systems

simultaneously. In partitioning mode, when System A

is armed, the [STAY]key flashes. If System B is

armed, the [AWAY]key flashes. If both systems are

armed, both of these keys will be flashing.

2.0 ACCESS CODES

2.1 PROGRAMMINGUSERCODES

In addition to the master code, the Esprit control

panel can be programmed to accept up to 48 user

codes.

Esprit Keypads 5

Note: Avoid programming simple or

obvious access codes, such as your

telephone number, address or codes such

as 1234.

To create or modify access codes, follow the steps

indicated in section2.2. The master code and user

codes are identified by a 2 digit “code number”.

2.2 CREATINGUSERCODES

1) Press [ENTER]and then enter your master code

(default 474747) or user 1 code. You will hear

the “confirmation” beep and the [ENTER]key will

flash.

2) Enter the two digit “code number” (01-48) for the

user code you wish to program (or 00 to change

the master code). You will hear the

“confirmation” beep and the [ENTER]key will stay

on.

3) Key in 4 or 6-digit user access code and press

[ENTER]. The “confirmation” beep will be heard

again. The [ENTER]key will flash. You may

continue programming other user codes, or

press [CLEAR]to exit programming mode.

Note: [2ND]key flashes if location is empty

(no code programmed).

6 User’s Manual

2.3 DURESS CODES

The last user code (user 48) can be programmed to

report a “duress code”. If you are forced to arm or

disarm your system under threat, a duress code can

be entered to produce a silent alarm at the monitoring

station. Check with your installer to see if this option

is active on your system.

2.4 DELETINGAUSERCODE

3.0 ARMING & DISARMING

3.1 EXITDELAY

After entering a valid arming sequence, an exit delay

timer will provide you with time to exit the protected

area before the system arms. The keypad may beep

during the exit delay.

How do I delete a user code?

1) Press the [ENTER]key.

2) Enter your [MASTERCODE](default 474747).

3) Enter the 2-digit [CODENUMBER](01-48) to be deleted.

4) Press the [2ND]key.

5) Press the [ENTER]key.

6) If you wish to delete another user code, repeat steps 1

to 5. If you wish to exit, press the [CLEAR]key.

Esprit Keypads 7

3.2 REGULAR SYSTEMARMING

3.3 STAYARMING

Stay arming allows you to remain in the protected

area while “partially” arming the system (perimeter

zones only, such as doors and windows).

3.4 ONETOUCH ARMING

One touch system arming - no code required. Check

with your installer if these features are enabled.

3.4.1 Key [10] - Regular Arming:

When the “ready” light is on, pressing key [10]

steadily for 2 seconds automatically arms the system.

How do I Regular Arm the system?

1) The green “READY’light must be ON in order to arm

the system.

2) Enter your User Code.

After the Confirmation beep, the “ready” light and the

[STAY]and [AWAY]buttons will begin to flash. The exit

delay timer will begin the countdown to arming.

How do I Stay Arm the system?

1) Press the [STAY]button.

2) Enter your User Code.

After the Confirmation beep, the “ready” light and the

[STAY]and [AWAY]buttons will begin to flash. The exit

delay timer will begin the countdown to arming.

8 User’s Manual

3.4.2 Key [STAY/11] - Stay arming:

Please refer to section3.3 on page7 for an

explanation of stay arming. Press the [STAY/11] key

steadily for 2 seconds. This will automatically “Stay”

arm the system.

3.5 DOUBLESTAYARMING:

After Stay Arming and during the exit delay, press

and hold the [STAY/11] key to switch any delayed

zones to “instant” zones. Regular arming cancels

“double stay” arming.

3.6 FASTEXITWHILEINSTAYMODE:

3.6.1 Fast Exit and Stay Arm

To exit the already Stay armed premises and remain

Stay armed, press key [STAY/11] for two seconds.

The system will switch to exit delay mode (“ready”

LED flashes). At the end of the exit delay period, the

system will return to “Stay” arming mode.

3.6.2 Fast Exit and Regular Arm

To exit the already Stay armed premises and switch

to regular arming, press key [10] for two seconds.

The system will switch to regular arming (keys [11]

and [12] flash) with an exit delay. At the end of the

exit delay period, the system is regular armed.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Paradox Tastiera

Paradox

Paradox TM50 Touch Manuale utente

Paradox

Paradox MAGELLAN K10V/H Manuale utente

Paradox

Paradox K70C Manuale utente

Paradox

Paradox Spectra 1641 Istruzioni per il montaggio

Paradox

Paradox Spectra 1689 Manuale utente

Paradox

Paradox 1640 Manuale utente

Paradox

Paradox Esprit 639 Manuale utente

Paradox

Paradox Digiplex EVO DGP2-641BL Manuale utente

Paradox

Paradox IMPERIAL V32 Manuale utente

Paradox

Paradox REM3 Manuale utente

Paradox

Paradox K32LCD+ Manuale utente

Paradox

Paradox Grafica DNE-K07 Istruzioni operative

Paradox

Paradox DigiplexNE DGP2-641 Manuale utente

Paradox

Paradox Digiplex DGP2-648 Manuale utente

Paradox

Paradox Digiplex DGP-641 Manuale utente

Paradox

Paradox Esprit+ 642 Manuale utente

Paradox

Paradox Magellan K636 Manuale utente

Paradox

Paradox Digiplex DGP2-648 Manuale utente

Paradox

Paradox 1686V Manuale utente

Paradox

Paradox K35 Manuale utente

Paradox

Paradox Spectra 1641BL Manuale utente

Paradox

Paradox K641 Manuale utente

Paradox

Paradox Digiplex DGP-641 Manuale utente

Paradox

Paradox TM50 Touch Manuale utente

Manuali Tastiera popolari di altre marche

BFT

BFT SELETTO Manuale utente

Micro Id

Micro Id MP7G3BL Manuale di istruzioni

WindowMaster

WindowMaster WLI 130 Manuale utente

ACT

ACT ACT PRO 1030 Manuale utente

Cardin

Cardin SSB Series Manuale utente

Harman Kardon

Harman Kardon KP 1 Manuale utente

Chamberlain

Chamberlain KPR2000 Guida utente

CYP

CYP CR-KP1 Manuale utente

Aeware

Aeware k-35 Series Guida di riferimento

Aritech

Aritech CS-175 Series Manuale utente

GE NetworX NX-1600E Series Manuale utente

Lenze AC Tech

Lenze AC Tech MC SERIES Manuale utente

Burg Wächter

Burg Wächter secuENTRY 7711 Manuale utente

Aeware

Aeware in.k450 Manuale utente

Lenze

Lenze EPM-H410 Manuale utente

Toshiba

Toshiba RKP007Z Manuale utente

Gemini

Gemini GEM-DXK1 KEYPAD Manuale utente

Russound

Russound MDK-C5 Manuale operativo