Paradyne COMSPHERE 3610 Manuale utente

COMSPHEREr

3600 SERIES

DATA SERVICE UNITS

MODELS 3610 & 3611

QUICK REFERENCE

Document No. 3610-A2-GL11-20

Printed in U.S.A.

Notice

This publication is protected by federal copyright law. No part of this publication may be

copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated

into any human or computer language in any form or by any means, electronic,

mechanical, magnetic, manual or otherwise, or disclosed to third parties without the

express written permission of Paradyne Corporation, 8545 126th Ave. N., Largo,

FL 33773.

Paradyne Corporation makes no representation or warranties with respect to the

contents hereof and specifically disclaims any implied warranties of merchantability or

fitness for a particular purpose. Further, Paradyne Corporation reserves the right to

revise this publication and to make changes from time to time in the contents hereof

without obligation of Paradyne Corporation to notify any person of such revision or

changes.

Changes and enhancements to the product and to the information herein will be

documented and issued as a new release to this manual.

Warranty, Sales, Service, and Training Information

Contact your local sales representative, service representative, or distributor directly for

any help needed. For additional information concerning warranty, sales, service, repair,

installation, documentation, training, distributor locations, or Paradyne worldwide office

locations, use one of the following methods:

HInternet: Visit the Paradyne World Wide Web site at www.paradyne.com. (Be

sure to register your warranty at www.paradyne.com/warranty.)

HTelephone: Call our automated system to receive current information by fax or to

speak with a company representative.

— Within the U.S.A., call 1-800-870-2221

— Outside the U.S.A, call 1-727-530-2340

Document Feedback

We welcome your comments and suggestions about this document. Please mail them

to Technical Publications, Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773,

or send e-mail to [email protected]. Include the number and title of this

document in your correspondence. Please include your name and phone number if you

are willing to provide additional clarification.

Trademarks

COMSPHERE is a registered trademark of Paradyne Corporation. All other products

and services mentioned are the trademarks, service marks, registered trademarks, or

registered service marks of their respective owners.

Software and Firmware License Agreement

ONCE YOU HAVE READ THIS LICENSE AGREEMENT AND AGREE TO ITS

TERMS, YOU MAY USE THE SOFTWARE AND/OR FIRMWARE INCORPORATED

INTO THE PARADYNE PRODUCT. BY USING THE PARADYNE PRODUCT YOU

SHOW YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE AGREEMENT.

In the event that you do not agree with any of the terms of this license agreement,

promptly return the unused Product in its original packaging and your sales receipt or

invoice to the location where you obtained the paradyne Product or the location from

which it was shipped to you, as applicable, and you will receive a refund or credit for

the paradyne Product purchased by you.

The terms and conditions of this License Agreement (the “Agreement”) will apply to the

software and/or firmware (individually or collectively the “Software”) incorporated into

the Paradyne product (the “Product”) purchased by you and any derivatives obtained

from the Software, including any copy of either. If you have executed a separate written

agreement covering the Software supplied to you under this purchase, such separate

written agreement shall govern.

Paradyne Corporation (“Paradyne”) grants to you, and you (“Licensee”) agree to accept

a personal, non-transferable, non-exclusive, right (without the right to sublicense) to

use the Software, solely as it is intended and solely as incorporated in the Product

purchased from Paradyne or its authorized distributor or reseller under the following

terms and conditions:

1. Ownership: The Software is the sole property of Paradyne and/or its licensors. The

Licensee acquires no title, right or interest in the Software other than the license

granted under this Agreement.

2. Licensee shall not use the Software in any country other than the country in which

the Product was rightfully purchased except upon prior written notice to Paradyne

and an agreement in writing to additional terms.

3. The Licensee shall not reverse engineer, decompile or disassemble the Software

in whole or in part.

4. The Licensee shall not copy the Software except for a single archival copy.

5. Except for the Product warranty contained in the manual, the Software is provided

“AS IS” and in its present state and condition and Paradyne makes no other

warranty whatsoever with respect to the Product purchased by you. This

Agreement expressly excludes all other warranties, whether express or implied, or

oral or written, including without limitation:

a. Any warranty that the Software is error-free, will operate uninterrupted in your

operating environment, or is compatible with any equipment or software

configurations; and

b. ANY AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION

IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE AND NON-INFRINGEMENT.

Some states or other jurisdictions do not allow the exclusion of implied warranties

on limitations on how long an implied warranty lasts, so the above limitations may

not apply to you. This warranty gives you specific legal rights, and you may also

have other rights which vary from one state or jurisdiction to another.

6. In no event will Paradyne be liable to Licensee for any consequential, incidental,

punitive or special damages, including any lost profits or lost savings, loss of

business information or business interruption or other pecuniary loss arising out of

the use or inability to use the Software, whether based on contract, tort, warranty

or other legal or equitable grounds, even if Paradyne has been advised of the

possibility of such damages, or for any claim by any third party.

7. The rights granted under this Agreement may not be assigned, sublicensed or

otherwise transferred by the Licensee to any third party without the prior written

consent of Paradyne.

8. This Agreement and the license granted under this Agreement shall be terminated

in the event of breach by the Licensee of any provisions of this Agreement.

9. Upon such termination, the Licensee shall refrain from any further use of the

Software and destroy the original and all copies of the Software in the possession

of Licensee together with all documentation and related materials.

10. This Agreement shall be governed by the laws of the State of Florida, without

regard to its provisions concerning conflicts of laws.

COMSPHEREr3600 Series Data Service Units

Models 3610 & 3611

Quick Reference

Document Number 3610-A2-GL11-20

February 2004

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the

documentation for specific topics and print only what you need, reducing the waste of

surplus printing. It also helps us maintain competitive prices for our products.

Complete documentation for this product is available at www.paradyne.com.

Select Support →Technical Manuals →Subrate Digital Access Devices.

Select the following document:

3610-A2-GB46

COMSPHERE 3600 Series Data Service Units,

Models 3610 and 3611, User’s Guide

To request a paper copy of a Paradyne document or to speak with a sales

representative, please call 1-727-530-2000.

Model 3610 Installation

To install the COMSPHERErModel 3610 DSU, perform these steps:

HRead the Important Safety Instructions on page 28.

HIf you are installing new hardware into an existing system, verify that software and

firmware levels are compatible. See Software and Firmware Version Control on

page 27.

HVerify the S1 switch settings.

HPower up the DSU.

HConnect to the DDS Network.

HPerform network verification testing.

HConnect to the DTE.

Model 3610: Verifying the S1 Switch Settings

The Model 3610 DSU has a switch located under the front panel. To verify or change

the S1 switch settings, remove the front bezel:

"Procedure

1. Place a small screwdriver or your thumbs under the two tabs on the outside edges

of the front bezel. Firmly press upward to separate the bezel from the tabs.

496-14701-01

Front Bezel

COMSPHERE 3610

Front Bezel

2. Swing the front bezel up and set aside.

3. Change the switch settings if necessary. Use a small instrument. Do not use a

pencil.

If the DSU has . . . Then use . . .

Two switches Figure A.

Four switches Figure B.

4. Reinsert the front bezel’s hinge tabs into position at the top and swing the bezel

down. Snap the bezel back into place.

Figure A

496-14702-01

Switch 1

V.32

Analog

DBM

Interface

(S1-1)

Frame Ground/

Signal Ground

(S1-2)

Switch Setting Function

S1-1

V32

(default)

Permissive transmit output level of –9 dBm

V.32

Analog

DBM only

OFF Programmable transmit output level between –12 dBm and

0 dBm

ON Frame ground (FG) connected to signal ground (SG)

S1-2 OFF

(default)

FG connected to SG through 100-ohm resistor

ON is to the rear as you face the front of the DSU.

OFF is to the front.

Figure B

496-14719-02

Switch 1

V.35

Test Mode

(S1-4)

EIA-232

Test Mode

(S1-3)

V.32

Analog

DBM

Interface

(S1-1) Frame Ground/

Signal Ground

(S1-2)

234

1234

Switch Setting Function

S1-1

V32

(default)

Permissive transmit output level of –9 dBm

V.32

Analog

DBM only

OFF Programmable transmit output level between –12 dBm and

0 dBm

ON Frame ground (FG) connected to signal ground (SG)

S1-2 OFF

(default)

FG connected to SG through 100-ohm resistor

S1-3

(default)

Enables EIA-232 Test mode; Pin 25 controlled by the DSU

S1-3

OFF Disables EIA-232 Test mode

S1-4

(default)

Enables V.35 Test mode; V.35 lead NN controlled by the DSU

S1-4

OFF Disables V.35 Test mode

ON is to the left as you face the front of the DSU.

OFF is to the right.

Model 3610: Powering Up the DSU

"Procedure

1. At the rear of the DSU, insert the round end of the power cable into the receptacle

labeled POWER.

Low

Voltage

AC Power

495-14703

Table-Top

Transformer

POWER LINE BACKUP CC/DC

V.35

3-Prong

Grounded

Wall Outlet

2. Connect the 3-prong plug at the other end of the cable to an ac outlet.

Model 3610: DDS Network Connection

To connect the DSU to the DDS network:

"Procedure

1. For countries other than Canada, use an 8-pin to 8-pin network cable (Feature

Number 3600-F3-501 or 3600-F3-502). Plug either end into the wall jack.

For Canada, ensure that approved primary protectors have been installed on the

circuit in accordance with Article 800 of the National Electric Code, NFPA 70, in the

United States and Section 60 of the Canadian Electric Code, Part 1, in Canada.

Plug the 6-pin cable end (Feature Number 3600-F1-006) into the wall jack.

2. Plug the other end of the cable into the DSU jack labeled LINE.

495-14578-02

DDS Network

Connection

Line

POWER LINE BACKUP CC/DC

V.35

RJ48S

Wall Jack

If a remote DSU is also connected to the network and there are no other facility alarms,

the:

HDSU’s green OK LED lights.

HAlrm indicator is no longer lit.

HHealth and Status screen no longer displays a No Signal message. The DDS data

rate displays Auto while detecting a rate. Change the Rate(Kbps) to a set rate

when the data rate has been detected.

If connecting the DSU to a LADS network, set the data rate. There are distance

limitations that govern the use of DSUs on the network.

Altri manuali per COMSPHERE 3610

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Paradyne Hardware di rete

Paradyne

Paradyne 24-Port SHDSL Mini DSLAM SMD2000-24T Manuale utente

Paradyne

Paradyne 4300 Manuale utente

Paradyne

Paradyne HotWire 7924 Manuale utente

Paradyne

Paradyne HotWire 5246 Manuale utente

Paradyne

Paradyne FrameSaver NP 110 Manuale utente

Paradyne

Paradyne SLV Manuale utente

Paradyne

Paradyne 3172 Manuale utente

Paradyne

Paradyne GranDSLAM 4200 Manuale utente

Paradyne

Paradyne COMSPHERE 6700 Series Manuale utente

Paradyne

Paradyne Hotwire 5216 Manuale utente

Paradyne

Paradyne COMSPHERE 3810 Manuale utente

Paradyne

Paradyne Hotwire 5620 Manuale utente

Paradyne

Paradyne MIM-2T1 Manuale utente

Paradyne

Paradyne Hotwire 7996 Manuale utente

Paradyne

Paradyne ACCULINK 3160 Manuale utente

Paradyne

Paradyne 7610 SNMP DSU Manuale utente

Paradyne

Paradyne COMSPHERE 3550 Series Manuale utente

Paradyne

Paradyne COMSPHERE 6700 Series Manuale utente

Paradyne

Paradyne Hotwire 5446 Manuale utente

Paradyne

Paradyne 7915-A1 E1 SDSL Manuale utente

Paradyne

Paradyne 7112 Manuale utente

Paradyne

Paradyne ACCULINK 3160 Manuale

Paradyne

Paradyne JetFusion 2008 Manuale utente

Paradyne

Paradyne ACCULINK 3160 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente