Paradyne M/HDSL Standalone Termination Unit HOTWIRE... Manuale utente

HOTWIREMODEL 7986

M/HDSL STANDALONE

TERMINATION UNIT

WITH G.703 INTERFACE

USER’S GUIDE

Document No. 7986-A2-GB20-00

September 1998

Printed on recycled paper

A 7986-A2-GB20-00

September 1998

Printed in U.S.A.

Notice

This publication is protected by federal copyright law. No part of this publication may be copied or distributed,

transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language in any form

or by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the

express written permission of Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773.

Paradyne Corporation makes no representation or warranties with respect to the contents hereof and specifically

disclaims any implied warranties of merchantability or fitness for a particular purpose. Further, Paradyne Corporation

reserves the right to revise this publication and to make changes from time to time in the contents hereof without

obligation of Paradyne Corporation to notify any person of such revision or changes.

Changes and enhancements to the product and to the information herein will be documented and issued as a new

release to this manual.

Warranty, Sales, and Service Information

Contact your local sales representative, service representative, or distributor directly for any help needed. For

additional information concerning warranty, sales, service, repair, installation, documentation, training, distributor

locations, or Paradyne worldwide office locations, use one of the following methods:

HVia the Internet: Visit the Paradyne World Wide Web site at http://www.paradyne.com

HVia Telephone: Call our automated call system to receive current information via fax or to speak with a

company representative.

— Within the U.S.A., call 1-800-870-2221

— Outside the U.S.A., call 1-727-530-2340

Trademarks

All products and services mentioned herein are the trademarks, service marks, registered trademarks or registered

service marks of their respective owners.

Document Feedback

We welcome your comments and suggestions about this document. Please mail them to Technical Publications,

Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773, or send e-mail to [email protected]. Include

the number and title of this document in your correspondence. Please include your name and phone number if you

are willing to provide additional clarification.

Important Information

7986-A2-GB20-00 September 1998

Important Safety Instructions

1. Read and follow all warning notices and instructions marked on the product or included in the manual.

2. Input power to this product must be provided by one of the following: (1) a UL Listed/CSA Certified power source

with a Class 2 or Limited Power Source (LPS) output for use in North America; or (2) a 24 Vdc National Electric

Code (NEC) ANSI/NFPA 70/Canadian Electric Code (CEC) Class 2 circuit installed in accordance with articles

110-16, 110-17, and 110-18 of the NEC, and articles 2-308, 2-310, 2-312, 2-314, 2-200, and 2-202 of the CEC, or

(3) a Safety Extra Low Voltage (SELV) power source with a maximum available output of less than 240 VA,

certified for use in the country of installation.

3. Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to

protect it from overheating, these slots and openings must not be blocked or covered.

4. Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the

power cord.

5. Do not attempt to install or service this product yourself, as opening or removing covers may expose you to

dangerous high voltage points or other risks. Refer all installation and servicing to qualified service personnel.

6. General purpose cables are provided with this product. Special cables, which may be required by the regulatory

inspection authority for the installation site, are the responsibility of the customer.

7. When installed in the final configuration, the product must comply with the applicable Safety Standards and

regulatory requirements of the country in which it is installed. If necessary, consult with the appropriate regulatory

agencies and inspection authorities to ensure compliance.

8. A rare phenomenon can create a voltage potential between the earth grounds of two or more buildings. If

products installed in separate buildings are interconnected, the voltage potential may cause a hazardous

condition. Consult a qualified electrical consultant to determine whether or not this phenomenon exists and, if

necessary, implement corrective action prior to interconnecting the products.

9. In addition, if the equipment is to be used with telecommunications circuits, take the following precautions:

—Never install telephone wiring during a lightning storm.

—Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

—Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the

network interface.

—Use caution when installing or modifying telephone lines.

—Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of

electric shock from lightning.

—Do not use the telephone to report a gas leak in the vicinity of the leak.

Important Information

C 7986-A2-GB20-00

September 1998

EMI Warnings

!WARNING:

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

The authority to operate this equipment is conditioned by the requirements that no modifications will be

made to the equipment unless the changes or modifications are expressly approved by Paradyne

Corporation.

!WARNING:

To Users of Digital Apparatus in Canada:

This Class A digital apparatus meets all requirements of the Canadian interference-causing equipment

regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du règlement sur le matérial

brouilleur du Canada.

7986-A2-GB20-00 September 1998

Contents

About This Guide

HDocument Purpose and Intended Audience v. . . . . . . . . . . . . . . . . . . . . . . . .

HDocument Summary v. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HProduct-Related Documents vi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 About the Model 7986 Standalone Termination Unit

HM/HDSL Overview 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HHotwire 7986 Termination Unit Features 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . .

HNetwork Configuration 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HFront Panel LED Status Indicators 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HRear Panel Interface Connections 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HMIB Support 1-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Using the Asynchronous Terminal Interface

HUser Interface Access 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HCommunication Port Settings 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HInitiating an ATI Session 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HScreen Work Areas 2-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HNavigating the Screens 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Keyboard Keys 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Screen Function Keys 2-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switching Between Screen Work Areas 2-8. . . . . . . . . . . . . . . . . . . . . . . .

HEnding an ATI Session 2-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents

ii 7986-A2-GB20-00

September 1998

3 Initial Startup and Configuration

HOverview 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConnecting Power to the Unit 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HOptional Power Sources 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connecting the Unit to an Optional External DC Power Source 3-2. . . .

HConnecting to the Network 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConnecting to a System Terminal 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HEntering Identity Information 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HChoosing a Configuration Mode 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConfiguring the Unit Using the Configuration Menus 3-5. . . . . . . . . . . . . . . . .

Configuration Options 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConfiguring the Unit Using the Internal Switches 3-6. . . . . . . . . . . . . . . . . . . .

Switchpack Locations 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switchpack Definitions 3-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HAccessing and Displaying Configuration Options 3-10. . . . . . . . . . . . . . . . . . . .

HConfiguration Edit/Display 3-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConfiguring AutoRate 3-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConfiguration Loader 3-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HSaving Configuration Options 3-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HDownload Code 3-17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 Monitoring the Unit

HWhat to Monitor 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HViewing System and Test Status 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Health and Status 4-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Self-Test Results 4-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Test Status 4-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HViewing Network Error Statistics 4-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HViewing Network Performance Statistics 4-9. . . . . . . . . . . . . . . . . . . . . . . . . . .

HViewing G.703 Performance Statistics 4-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HViewing Model 7986 Standalone Termination Unit LEDs 4-13. . . . . . . . . . . . . .

HModel 7986 Standalone Termination Unit LEDs 4-14. . . . . . . . . . . . . . . . . . . . .

Contents

iii

7986-A2-GB20-00 September 1998

5 Testing

HAccessing the Test Menu 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HRunning Network Tests 5-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Line Loopback 5-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Repeater Loopback 5-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DTE Loopback 5-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Send Remote Line Loopback 5-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Send and Monitor 511 5-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HDevice Tests 5-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lamp Test 5-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HEnding an Active Test 5-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6 Messages and Troubleshooting

HOverview 6-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConfiguring SNMP Traps 6-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HDevice Messages 6-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HTroubleshooting 6-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 Security

HOverview 7-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HATI Access Levels 7-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HCreating a Login 7-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HDeleting a Login 7-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Resetting the Termination Unit’s COM Port or Factory Defaults 7-4. . . .

8 IP Addressing

HSelecting an IP Addressing Scheme 8-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HIP Addressing Example 8-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents

iv 7986-A2-GB20-00

September 1998

A Configuration Option Tables

HOverview A-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HNetwork Interface Options Menu A-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HG.703 Interface Options Menu A-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HSystem Options Menu A-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HCommunication Port A-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HManagement and Communication Options Menu A-11. . . . . . . . . . . . . . . . . . . .

HTelnet Session Options A-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HCommunication Protocol Options A-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SNMP Traps Options A-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B Standards Compliance for SNMP Traps

HSNMP Traps B-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

warmStart B-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

authenticationFailure B-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

linkUp and linkDown B-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HEnterprise-Specific Traps B-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C Cables and Pin Assignments

HOverview C-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HE1 Network Interface C-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HDSL Network Interface Cable C-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HCOM Port Interface Cable C-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HPower Input Connector C-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HOptional Power Cable C-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Technical Specifications

Glossary

Index

7986-A2-GB20-00 September 1998

About This Guide

Document Purpose and Intended Audience

This guide contains information needed to set up, configure, and operate the

Hotwire Model 7986 Multirate/High Bit-Rate Digital Subscriber Line (M/HDSL)

Standalone Termination Unit with G.703 interface and is intended for installers

and operators.

Document Summary

Section Description

Chapter 1

About the Model 7986 Standalone Termination Unit.

Describes the Model 7986 Termination Unit’s features and

capabilities.

Chapter 2

Using the Asynchronous Terminal Interface.

Provides

instructions for accessing the user interface and navigating

through the screens.

Chapter 3

Initial Startup and Configuration.

Provides procedures for

setting up the user interface and configuration steps.

Chapter 4

Monitoring the Unit.

Describes using the LEDs, status, and

network statistics to monitor the unit.

Chapter 5

Testing.

Provides information about available tests and test

setup.

Chapter 6

Messages and Troubleshooting.

Provides information on

SNMP traps, device messages, and troubleshooting.

Chapter 7

Security.

Presents procedures for creating a login, setting

the effective access levels, and controlling SNMP access.

Chapter 8

IP Addressing.

Provides information and examples

regarding IP addresses.

About This Guide

vi 7986-A2-GB20-00

September 1998

Section Description

Appendix A

Configuration Option Tables.

Contains all configuration

options, default settings, and possible settings.

Appendix B

Standards Compliance for SNMP Traps.

Contains SNMP

trap compliance information.

Appendix C

Cables and Pin Assignments.

Contains connector and

interface information.

Appendix D

Technical Specifications.

Contains physical and regulatory

specifications, network and port interfaces, power

consumption values, and accessory part numbers.

Glossary Defines acronyms and terms used in this document.

Index Lists key terms, acronyms, concepts, and sections in

alphabetical order.

Product-Related Documents

Document Number Document Title

8786-A2-GB20

Hotwire 8786 M/HDSL Termination Unit User’s

Guide

8786-A2-GZ40

Hotwire 8786 M/HDSL Termination Unit Installation

Instructions

Contact your sales or service representative to order additional product

documentation.

Paradyne documents are also available on the World Wide Web at:

http://www.paradyne.com

Select

Service & Support

→

Technical Manuals

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Paradyne Hardware di rete

Paradyne

Paradyne ACCULINK 3161 CSU Manuale utente

Paradyne

Paradyne Hotwire 8784 Manuale utente

Paradyne

Paradyne 5030 Manuale utente

Paradyne

Paradyne COMSPHERE 6700 Series Manuale utente

Paradyne

Paradyne SMD2000-24E Manuale utente

Paradyne

Paradyne ACCULINK 3151 CSU Manuale utente

Paradyne

Paradyne FrameSaver NP 110 Manuale utente

Paradyne

Paradyne MIM-4T1 Manuale utente

Paradyne

Paradyne HotWire 7924 Manuale utente

Paradyne

Paradyne Comsphere 3510 Manuale operativo e di manutenzione

Paradyne

Paradyne iMarc SLV 9820-2M Manuale utente

Paradyne

Paradyne ACCULINK 3160 Manuale utente

Paradyne

Paradyne BitStorm 4800 Express Manuale utente

Paradyne

Paradyne MIM-4000F Manuale utente

Paradyne

Paradyne COMSPHERE 6700 Series Manuale utente

Paradyne

Paradyne T1 Access Mux 916x Manuale per l'uso e la cura

Paradyne

Paradyne 4000E Manuale utente

Paradyne

Paradyne COMSPHERE 3800 Series Manuale di istruzioni

Paradyne

Paradyne Fan Tray 8820-S2-900 Manuale utente

Paradyne

Paradyne Jetstream CPX-1000 Istruzioni operative

Paradyne

Paradyne COMSPHERE 3610 Manuale utente

Paradyne

Paradyne 7511 Manuale utente

Paradyne

Paradyne 7610 SNMP DSU Manuale utente

Paradyne

Paradyne Compshere 3000 Series Manuale operativo e di manutenzione

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente