PCchips M717 Manuale utente
The information presented in this publication has been
carefully checked for reliability; however, no
responsibility is assumed for inaccuracies.
Specifications are subject to change without notice.
Trademarks
IBM, PC/AT, and PC/XT are trademarks of
International Business Machines Corporation.
Intel and Pentium¨II are trademarks of Intel
Corporation.
AMI is a trademark of American Megatrends Inc.
MS-DOS and WINDOWS 95/NT are registered
trademarks of Microsoft Corporation.
ii
Contents
Chapter 1: Introduction ......................................................................1
Key Features ...................................................................................2
Unpacking the Mainboard & Static Electricity Precautions.....4
Chapter 2: Hardware Configuration................................................5
CPU Installation .............................................................................6
Installation Procedures...........................................................7
Mainboard Component Locations .............................................10
Connectors.....................................................................................11
PW1 Ð AT Power Connector ........................................11
COM1/2 Ð Serial Port #1/#2 .......................................11
PRN1 Ð Parallel Printer Connector..............................11
FDC1 Ð Floppy Disk Drive Connector........................11
IDE1/IDE2 Ð Primary/Secondary IDE Connectors .11
KBD1 Ð Keyboard Connector .......................................11
PS2/PS1 Ð PS/2 Mouse Pin Header/Connector .......11
VGA1 Ð VGA Connector...............................................11
J3 Ð ATX Form Card Connector ...................................11
J6 (2, 4, 6, 8, 10) (KY-LOCK) Ð Keylock & Power LED
Connector........................................................................12
J6 (1, 3, 5, 7) (SPK) Ð Speaker Connector.....................12
J6 (15, 16) (HD-LED) Ð HDD LED Connector............12
J6 (17, 18) (RST) Ð Reset Switch Connector ................12
FAN1 Ð CPU Fan Connector ........................................12
Sound Pro Connectors:.........................................................13
CD1/CD2 Ð Analog Audio for Sony/Panasonic ......13
J2 Ð Sound and Game ....................................................13
J1 (A)/(B) Ð Digital Audio OUT/IN ...........................13
Jumper Settings ............................................................................14
JP6 Ð DIMM Voltage Selectors .....................................14
JP2 Ð Microphone Type Selector..................................14
JP3 Ð CMOS RAM Clear Selector.................................14
Memory Installation.....................................................................15
iii
Chapter 3: ACPI Functions & Connectors with ATX Power.....16
PW2 Ð ATX Style Power Connector ............................16
Software Power-Off ..............................................................17
Modem Ring Power-On .......................................................17
Alarm Wake Up ....................................................................17
J6 (19, 20) (PWRBT) Ð ATX Power Button and Suspend
Switch Connector ..................................................................18
J4 Ð Wake On LAN Connector .....................................18
Chapter 4: BIOS Setup .....................................................................19
Entering BIOS Setup ....................................................................20
Default ...........................................................................................21
Load Optimal Settings .........................................................21
Load Best Performance Settings .........................................21
Setup Items....................................................................................21
Standard CMOS Setup .........................................................21
Advanced CMOS Setup .......................................................23
Advanced Chipset Setup .....................................................25
Power Management Setup...................................................27
PCI/Plug and Play Setup.....................................................29
Peripheral Setup....................................................................30
CPU Plug and Play Setup ....................................................31
Change Supervisor Password .............................................32
Auto-Detect Hard Disks.......................................................32
Save Settings and Exit ..........................................................32
Exit Without Saving..............................................................32
Chapter 1
Introduction
This mainboard is a highly integrated high-
performance mainboard based on the advanced
Pentium¨II microprocessor and featuring the high-end
AGPset chipset. The mainboard offers high flexibility
in configuration and is fully IBM PC/AT compatible.
2Chapter 1
Key Features
The advanced features of the mainboard include:
¥Supports Pentium¨II 233 ~ 333 MHz and Celeron
266 ~ 300 MHz CPUs with CPU Plug & Play feature
for faster and easier CPU installation at Slot1 for
AT Form Factor
¥Provides 2 DIMMs and 2 SIMMs for SDRAM/EDO
memory modules, memory expandable up to
256MB
¥Built in high performance 64bit 3D AGP Graphics
Accelerator with 8MB frame buffer
¥Supports Advanced Configuration Power Interface
(ACPI) and Legacy PMU and the Ultra DMA/33,
fully compliant to PC97 and PC98
¥Provides both AT/ATX power connectors, and
supports various functions of ATX power, such as
Suspend/Shutdown, Alarm Wake Up, and Wake
On LAN
¥Onboard PCI Bus Master IDE interface supports 4
IDE devices with 2 channels, 3 PCI, and 2 ISA slots
¥Onboard super Multi-I/O chip supports 2 serial
ports with 16550 compatible fast UART, 1 parallel
port with EPP and ECP capabilities, and one floppy
disk drive interface with 1Mb/s transfer rate
¥Provides PS/2 Mouse Pin Header, PS/2 Mouse
Connector, and ATX Form Card which containing
PS/2 Mouse, 2 USB interface, and Infrared
connectors (optional)
¥System BIOS supports TrendÕs ChipAwayVirus
function to ensure the entire boot process is virus-
free, no installation and configuration worries
¥Bundled PC-cillin97 (OEM) provides automatic
Virus Protection for Windows 95 and the Internet
Introduction 3
¥Onboard 3D Sound Pro meets PC98' SPEC and support
HRTF Positional Audio, Direct Sound 3D provide drivers
for 3D games that use Aureal software interface, Software
Wave-table Synthesizer, and Digital Audio Interface
(SPDIF) IN/OUT.
4Chapter 1
Unpacking the Mainboard & Static
Electricity Precautions
This Mainboard package contains the following items:
1. This Mainboard and the Device Driver
2. The Slot1 holder
3. This UserÕs Guide
4. Sound & Game ribbon cables/bracket
5. ATX Form Card (optional)
The mainboard is easily damaged by static electricity.
Follow the precautions below while unpacking or
installing the mainboard.
1. Do not remove the mainboard from its original
package until you are ready to install it.
2. Frequently ground yourself to discharge any static
electric charge that may build up in your body
while working on installation and/or
configuration. For example, you may ground
yourself by grasping an unpainted portion of the
systemÕs metal chassis.
3. Remove the mainboard from its anti-static
packaging and place it on a grounded surface,
component side up.
4. Handle the mainboard by its edges or by the
mounting bracket to avoid touching its
components.
5. Check the mainboard for damage. If any integrated
circuit appears loose, press carefully to seat it
firmly in its socket.
6. Do not apply power if the mainboard appears
damaged. If there is damage to the board contact
your dealer immediately.
Chapter 2
Hardware Configuration
Before you install the mainboard into the system
chassis, you may find it convenient to first configure
the mainboardÕs hardware. This chapter describes how
to set jumpers and install memory modules, and where
to attach components.
6Chapter 2
CPU Installation
This mainboard supports Intel Pentium¨II CPU using
a Single Edge Contact (SEC) slot. Make sure that you
have the following items (which should be included in
the package) before doing any installation. All parts
are labeled here with item numbers which will be
refered to in the Installation Procedures section. Item 1
and 2 together are the retention mechanism, please
refer to following procedures to complete your CPU
installation.
1) 4 screws:
2) 1 retention clip:
Indice
Altri manuali PCchips Scheda madre
PCchips
PCchips M925 Series Manuale utente
PCchips
PCchips M765VMRT Manuale utente
PCchips
PCchips M851AG Manuale utente
PCchips
PCchips M927 Series Manuale utente
PCchips
PCchips M598LMR Manuale utente
PCchips
PCchips M925G 8.0 Manuale utente
PCchips
PCchips M771LMR 1.x Manuale utente
PCchips
PCchips M825G Series Manuale utente
PCchips
PCchips M748LMRT Manuale utente
PCchips
PCchips M932LR Manuale utente
PCchips
PCchips M902LU V3.0 Manuale utente
PCchips
PCchips Motherboard Manuale utente
PCchips
PCchips A32G Manuale utente
PCchips
PCchips M930 Series Manuale utente
PCchips
PCchips M755LMR V7.1 Manuale utente
PCchips
PCchips M852 Manuale utente
PCchips
PCchips M925 Series Manuale utente
PCchips
PCchips M700 Series Manuale utente
PCchips
PCchips M905ULR 3.2 Manuale utente
PCchips
PCchips M758LMR Manuale utente
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
